OCMEBilingual mathematics & derivations繁體中文

Explore related knowledge and questions →

Question 31151: Derivative of a Polynomial Product

On this page
  1. Original question and givens
  2. Definition and scope
  3. Step-by-step derivation
  4. Reverse checks
  5. Result
  6. This question review and source binding

Return to catalogue page 156

← Question derivation index · Original question batch

R0061-31151 · q-20261007-advance-20261008-r05-derivative-rules-0051

Original question and givens

On all R, f has ascending coefficients [3], starting with its constant term; g has ascending coefficients [-2], starting with its constant term. Find the derivative of fg at x=1. Input degrees are at most three; retain all higher terms produced by the operation.

  • G001 — On all R, f has ascending coefficients [3], starting with its constant term; g has ascending coefficients [-2], starting with its constant term. Find the derivative of fg at x=1. Input degrees are at most three; retain all higher terms produced by the operation.

Definition and scope

Use the original question domain, assumptions and cited MKO definitions. This item has second-context mathematical and bilingual review, with the model, answer and every arithmetic step independently recomputed from the original parameters; the source question remains a candidate.

Step-by-step derivation

S001 · implies

Before

source roles = [qf-derivative-rule-product, derivative_product, domain, reals]

After

derived = [[integer_derivative_value]]

Conditions: none

Check THIS source interface:distance uses ONLY its complete coordinate frame;other families use a domain.Discrete operations use local hyphens,legacy banks underscores.Retain family-specific ordered output types and original bilingual data/status.

Step identifiers and dependencies

Rule: R61_SOURCE_exact_keys_operation_domain_OR_frame_and_output_roles · Uses: G001

S002 · implies

Before

source roles = [f OUTER or first, [3]]

After

derived = [[3]]

Conditions: none

Check RAW ascending coefficient arity1..4 and EVERY SAFE integer BEFORE trimming trailing zeros,retaining[0].The GIVEN whole polynomial law holds on R;sample values alone do not establish differentiability.

Step identifiers and dependencies

Rule: Derivative_RAW_ascending_arity_BEFORE_trim_whole_polynomial_R · Uses: G001, S001

S003 · implies

Before

source roles = [g INNER or second, [-2]]

After

derived = [[-2]]

Conditions: none

Check RAW ascending coefficient arity1..4 and EVERY SAFE integer BEFORE trimming trailing zeros,retaining[0].The GIVEN whole polynomial law holds on R;sample values alone do not establish differentiability.

Step identifiers and dependencies

Rule: Derivative_RAW_ascending_arity_BEFORE_trim_whole_polynomial_R · Uses: G001, S002

S004 · implies

Before

source roles = [f, [3]]

After

derived = [[0]]

Conditions: none

For EVERY term use(a_k x^k)′=k a_k x^(k−1);a constant differentiates to0.Keep ALL higher terms without reapplying raw-vector bounds.

Step identifiers and dependencies

Rule: Derivative_POWER_rule_EVERY_nonconstant_term_constant_derivative_zero · Uses: G001, S003

S005 · implies

Before

source roles = [g, [-2]]

After

derived = [[0]]

Conditions: none

For EVERY term use(a_k x^k)′=k a_k x^(k−1);a constant differentiates to0.Keep ALL higher terms without reapplying raw-vector bounds.

Step identifiers and dependencies

Rule: Derivative_POWER_rule_EVERY_nonconstant_term_constant_derivative_zero · Uses: G001, S004

S006 · calculation

Before

g derivative at ORIGINAL x Horner power0 times argument := mul(0, 1)

After

g derivative at ORIGINAL x Horner power0 times argument = 0

Conditions: none

Retain ORIGINAL operands and order for exact integer arithmetic.Only raw inputs are SAFE-bounded;derived integers are not recapped or approximated.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S005

S007 · calculation

Before

g derivative at ORIGINAL x Horner power0 plus coefficient := sum(0, 0)

After

g derivative at ORIGINAL x Horner power0 plus coefficient = 0

Conditions: none

Retain ORIGINAL operands and order for exact integer arithmetic.Only raw inputs are SAFE-bounded;derived integers are not recapped or approximated.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S006

S008 · implies

Before

source roles = [g derivative at ORIGINAL x, [0], 1]

After

derived = [0]

Conditions: none

Evaluate ascending coefficients by Horner from the highest power,multiplying the DECLARED argument then adding the ORIGINAL coefficient at every step,including zeros.Do not replace an inner value with original x.

Step identifiers and dependencies

Rule: Derivative_HORNER_ALL_coefficients_AT_declared_argument · Uses: G001, S007

S009 · calculation

Before

f derivative at ORIGINAL x Horner power0 times argument := mul(0, 1)

After

f derivative at ORIGINAL x Horner power0 times argument = 0

Conditions: none

Retain ORIGINAL operands and order for exact integer arithmetic.Only raw inputs are SAFE-bounded;derived integers are not recapped or approximated.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S008

S010 · calculation

Before

f derivative at ORIGINAL x Horner power0 plus coefficient := sum(0, 0)

After

f derivative at ORIGINAL x Horner power0 plus coefficient = 0

Conditions: none

Retain ORIGINAL operands and order for exact integer arithmetic.Only raw inputs are SAFE-bounded;derived integers are not recapped or approximated.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S009

S011 · implies

Before

source roles = [f derivative at ORIGINAL x, [0], 1]

After

derived = [0]

Conditions: none

Evaluate ascending coefficients by Horner from the highest power,multiplying the DECLARED argument then adding the ORIGINAL coefficient at every step,including zeros.Do not replace an inner value with original x.

Step identifiers and dependencies

Rule: Derivative_HORNER_ALL_coefficients_AT_declared_argument · Uses: G001, S010

S012 · calculation

Before

f value at ORIGINAL x Horner power0 times argument := mul(0, 1)

After

f value at ORIGINAL x Horner power0 times argument = 0

Conditions: none

Retain ORIGINAL operands and order for exact integer arithmetic.Only raw inputs are SAFE-bounded;derived integers are not recapped or approximated.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S011

S013 · calculation

Before

f value at ORIGINAL x Horner power0 plus coefficient := sum(0, 3)

After

f value at ORIGINAL x Horner power0 plus coefficient = 3

Conditions: none

Retain ORIGINAL operands and order for exact integer arithmetic.Only raw inputs are SAFE-bounded;derived integers are not recapped or approximated.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S012

S014 · implies

Before

source roles = [f value at ORIGINAL x, [3], 1]

After

derived = [3]

Conditions: none

Evaluate ascending coefficients by Horner from the highest power,multiplying the DECLARED argument then adding the ORIGINAL coefficient at every step,including zeros.Do not replace an inner value with original x.

Step identifiers and dependencies

Rule: Derivative_HORNER_ALL_coefficients_AT_declared_argument · Uses: G001, S013

S015 · calculation

Before

g value at ORIGINAL x Horner power0 times argument := mul(0, 1)

After

g value at ORIGINAL x Horner power0 times argument = 0

Conditions: none

Retain ORIGINAL operands and order for exact integer arithmetic.Only raw inputs are SAFE-bounded;derived integers are not recapped or approximated.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S014

S016 · calculation

Before

g value at ORIGINAL x Horner power0 plus coefficient := sum(0, -2)

After

g value at ORIGINAL x Horner power0 plus coefficient = -2

Conditions: none

Retain ORIGINAL operands and order for exact integer arithmetic.Only raw inputs are SAFE-bounded;derived integers are not recapped or approximated.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S015

S017 · implies

Before

source roles = [g value at ORIGINAL x, [-2], 1]

After

derived = [-2]

Conditions: none

Evaluate ascending coefficients by Horner from the highest power,multiplying the DECLARED argument then adding the ORIGINAL coefficient at every step,including zeros.Do not replace an inner value with original x.

Step identifiers and dependencies

Rule: Derivative_HORNER_ALL_coefficients_AT_declared_argument · Uses: G001, S016

S018 · calculation

Before

Derivative product ORIGINAL fprime times g := mul(0, -2)

After

Derivative product ORIGINAL fprime times g = 0

Conditions: none

Retain ORIGINAL operands and order for exact integer arithmetic.Only raw inputs are SAFE-bounded;derived integers are not recapped or approximated.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S017

S019 · calculation

Before

Derivative product ORIGINAL f times gprime := mul(3, 0)

After

Derivative product ORIGINAL f times gprime = 0

Conditions: none

Retain ORIGINAL operands and order for exact integer arithmetic.Only raw inputs are SAFE-bounded;derived integers are not recapped or approximated.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S018

S020 · calculation

Before

Derivative product ORIGINAL two terms sum := sum(0, 0)

After

Derivative product ORIGINAL two terms sum = 0

Conditions: none

Retain ORIGINAL operands and order for exact integer arithmetic.Only raw inputs are SAFE-bounded;derived integers are not recapped or approximated.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S019

S021 · implies

Before

source roles = [[3], [-2], 1, [0], [0]]

After

derived = [3, -2, 0, 0, 0]

Conditions: none

The product rule is(fg)′=f′g+fg′;retain BOTH terms,not f′g′.Evaluate at the SAME x without raw degree/value caps on derived results.

Step identifiers and dependencies

Rule: Derivative_PRODUCT_rule_BOTH_terms_NOT_product_of_derivatives · Uses: G001, S020

Reverse checks

  • S021 · premise_and_result_audit — Reverse-check the ORIGINAL inputs,types and premises;the conclusion need not uniquely recover its premises.This source-bound candidate is not independent review or formal proof.
  • S020 · premise_and_result_audit — Recompute Derivative product ORIGINAL two terms sum with exact rational arithmetic, not rounded decimals.
  • S019 · premise_and_result_audit — Recompute Derivative product ORIGINAL f times gprime with exact rational arithmetic, not rounded decimals.
  • S018 · premise_and_result_audit — Recompute Derivative product ORIGINAL fprime times g with exact rational arithmetic, not rounded decimals.
  • S017 · premise_and_result_audit — Reverse-check the ORIGINAL inputs,types and premises;the conclusion need not uniquely recover its premises.This source-bound candidate is not independent review or formal proof.
  • S016 · premise_and_result_audit — Recompute g value at ORIGINAL x Horner power0 plus coefficient with exact rational arithmetic, not rounded decimals.
  • S015 · premise_and_result_audit — Recompute g value at ORIGINAL x Horner power0 times argument with exact rational arithmetic, not rounded decimals.
  • S014 · premise_and_result_audit — Reverse-check the ORIGINAL inputs,types and premises;the conclusion need not uniquely recover its premises.This source-bound candidate is not independent review or formal proof.
  • S013 · premise_and_result_audit — Recompute f value at ORIGINAL x Horner power0 plus coefficient with exact rational arithmetic, not rounded decimals.
  • S012 · premise_and_result_audit — Recompute f value at ORIGINAL x Horner power0 times argument with exact rational arithmetic, not rounded decimals.
  • S011 · premise_and_result_audit — Reverse-check the ORIGINAL inputs,types and premises;the conclusion need not uniquely recover its premises.This source-bound candidate is not independent review or formal proof.
  • S010 · premise_and_result_audit — Recompute f derivative at ORIGINAL x Horner power0 plus coefficient with exact rational arithmetic, not rounded decimals.
  • S009 · premise_and_result_audit — Recompute f derivative at ORIGINAL x Horner power0 times argument with exact rational arithmetic, not rounded decimals.
  • S008 · premise_and_result_audit — Reverse-check the ORIGINAL inputs,types and premises;the conclusion need not uniquely recover its premises.This source-bound candidate is not independent review or formal proof.
  • S007 · premise_and_result_audit — Recompute g derivative at ORIGINAL x Horner power0 plus coefficient with exact rational arithmetic, not rounded decimals.
  • S006 · premise_and_result_audit — Recompute g derivative at ORIGINAL x Horner power0 times argument with exact rational arithmetic, not rounded decimals.
  • S005 · premise_and_result_audit — Reverse-check the ORIGINAL inputs,types and premises;the conclusion need not uniquely recover its premises.This source-bound candidate is not independent review or formal proof.
  • S004 · premise_and_result_audit — Reverse-check the ORIGINAL inputs,types and premises;the conclusion need not uniquely recover its premises.This source-bound candidate is not independent review or formal proof.
  • S003 · premise_and_result_audit — Reverse-check the ORIGINAL inputs,types and premises;the conclusion need not uniquely recover its premises.This source-bound candidate is not independent review or formal proof.
  • S002 · premise_and_result_audit — Reverse-check the ORIGINAL inputs,types and premises;the conclusion need not uniquely recover its premises.This source-bound candidate is not independent review or formal proof.
  • S001 · premise_and_result_audit — Reverse-check the ORIGINAL inputs,types and premises;the conclusion need not uniquely recover its premises.This source-bound candidate is not independent review or formal proof.

Result

0

The full substitutions and premise checks give the original answer; source identity,format and status are unchanged.

This question review and source binding

Review date: 2026-10-26

Original questions, answers, step expressions, numeric ASTs and historical records are retained. Source candidate labels remain historical and are not overwritten as formal proof.

Source hashes and review receipts
  • input commit: 0f7be61e2c22317a4075561dc822c87d881a50db
  • original question SHA-256: 7ad009e6e992f40037a0c110955d3e5c1bfd4c4aabea116269a71470335174a2
  • candidate record SHA-256: 25cf8bbe6939014a1684acdaa782ec4c015f2b62fce226afe7dee647faf00ac4
  • semantic review receipt SHA-256: 5403317467ff7c6b74c18ae7211530d0156ebc67d63fc00a3e07b81a201d3d69
  • question-first witness SHA-256: c2b5022aa77f803cd3e1ba9ce162a707da0281aa5bb5289111a97de51fe8c495
  • Lean: NOT_RUN · human review: NOT_PERFORMED
Same-source full JSON