# Question 2568: Every Point’s Least Period in the Complete Finite Model

[Return to catalogue page 13](https://ocme.evemisslab.com/en/questions/page/13/)

[← Question derivation index](https://ocme.evemisslab.com/en/questions/) · [Original question batch](https://ocme.evemisslab.com/en/practice/batch-20261013-advance-20261021-r03-orbit-fixed-periodic-foundations/#q-20261013-advance-20261021-r03-orbit-fixed-periodic-0093)

This teaching derivation has second-context AI mathematical and bilingual semantic review, limited to the model and assumptions stated in this question. It has no human review or new Lean proof and does not promote the original question or MKO to Canonical truth.

R0004-02568 · q-20261013-advance-20261021-r03-orbit-fixed-periodic-0093



## Original question and givens

Use the complete finite self-map on Fin(10)={0,…,9}, T(x)=(a*x+b) mod 10, a=0, b=9. Take least nonnegative residues even for negative a*x+b. Fixed points, return times and least positive periods are different notions; the conclusion concerns this finite model only. Positive period bound=6. Give (modulus,a,b,bound,every [point,least period or nonperiodic-point] row in point order,points whose least positive period is at most the bound).


- G001 — Use the complete finite self-map on Fin(10)={0,…,9}, T(x)=(a*x+b) mod 10, a=0, b=9. Take least nonnegative residues even for negative a*x+b. Fixed points, return times and least positive periods are different notions; the conclusion concerns this finite model only. Positive period bound=6. Give (modulus,a,b,bound,every [point,least period or nonperiodic-point] row in point order,points whose least positive period is at most the bound).





## Definition and scope

Use the original question domain, assumptions and cited MKO definitions. This item has second-context mathematical and bilingual review, with the model, answer and every arithmetic step independently recomputed from the original parameters; the source question remains a candidate.


- [mko-orbit-fixed-periodic](https://ocme.evemisslab.com/en/mko/mko-orbit-fixed-periodic/)





## Step-by-step derivation

S001 · impliesBefore

n=10; a=0; b=9

After

S={0,...,9}; T(z)=(a·z+b) mod n

Conditions: none

Remainders lie in0,...,n−1,so every state has one successor in the same finite set;negative dividends do not produce negative canonical remainders.

Step identifiers and dependenciesRule: finite_self_map · Uses: G001





S002 · impliesBefore

start=0

After

record each state before its first successor calculation

Conditions: none

Start with the specified point itself,not its first successor.

Step identifiers and dependenciesRule: orbit_initial_state · Uses: G001, S001





S003 · calculationBefore

point0 step1 product := mul(0, 0)

After

point0 step1 product = 0

Conditions: none

Multiply the current state by the original coefficient a,retaining its sign.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S002





S004 · calculationBefore

point0 step1 affine value := sum(0, 9)

After

point0 step1 affine value = 9

Conditions: none

Then add the original constant b;this integer is not yet the canonical state.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S003





S005 · impliesBefore

Euclidean division of 9 by 10

After

9=0·10+9

Conditions: none

Check the transition using quotient and nonnegative remainder;n>0 and0≤remainder<n ensure uniqueness.

Step identifiers and dependenciesRule: orbit_successor · Uses: G001, S004





S006 · calculationBefore

point0 step2 product := mul(0, 9)

After

point0 step2 product = 0

Conditions: none

Multiply the current state by the original coefficient a,retaining its sign.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S005





S007 · calculationBefore

point0 step2 affine value := sum(0, 9)

After

point0 step2 affine value = 9

Conditions: none

Then add the original constant b;this integer is not yet the canonical state.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S006





S008 · impliesBefore

Euclidean division of 9 by 10

After

9=0·10+9

Conditions: none

Check the transition using quotient and nonnegative remainder;n>0 and0≤remainder<n ensure uniqueness.

Step identifiers and dependenciesRule: orbit_successor · Uses: G001, S007





S009 · impliesBefore

distinct trace=[0, 9]; first repeated state=9

After

cycle_start=1; starting-point least period=null

Conditions: none

The first repeated state locates the cycle entry.If it is the initial point,the preceding states are distinct,so the first return is the least positive period.If entry is later,the initial point lies outside the cycle and never returns.

Step identifiers and dependenciesRule: finite_orbit_certificate · Uses: G001, S008





S010 · impliesBefore

start=1

After

record each state before its first successor calculation

Conditions: none

Start with the specified point itself,not its first successor.

Step identifiers and dependenciesRule: orbit_initial_state · Uses: G001, S009





S011 · calculationBefore

point1 step1 product := mul(0, 1)

After

point1 step1 product = 0

Conditions: none

Multiply the current state by the original coefficient a,retaining its sign.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S010





S012 · calculationBefore

point1 step1 affine value := sum(0, 9)

After

point1 step1 affine value = 9

Conditions: none

Then add the original constant b;this integer is not yet the canonical state.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S011





S013 · impliesBefore

Euclidean division of 9 by 10

After

9=0·10+9

Conditions: none

Check the transition using quotient and nonnegative remainder;n>0 and0≤remainder<n ensure uniqueness.

Step identifiers and dependenciesRule: orbit_successor · Uses: G001, S012





S014 · calculationBefore

point1 step2 product := mul(0, 9)

After

point1 step2 product = 0

Conditions: none

Multiply the current state by the original coefficient a,retaining its sign.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S013





S015 · calculationBefore

point1 step2 affine value := sum(0, 9)

After

point1 step2 affine value = 9

Conditions: none

Then add the original constant b;this integer is not yet the canonical state.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S014





S016 · impliesBefore

Euclidean division of 9 by 10

After

9=0·10+9

Conditions: none

Check the transition using quotient and nonnegative remainder;n>0 and0≤remainder<n ensure uniqueness.

Step identifiers and dependenciesRule: orbit_successor · Uses: G001, S015





S017 · impliesBefore

distinct trace=[1, 9]; first repeated state=9

After

cycle_start=1; starting-point least period=null

Conditions: none

The first repeated state locates the cycle entry.If it is the initial point,the preceding states are distinct,so the first return is the least positive period.If entry is later,the initial point lies outside the cycle and never returns.

Step identifiers and dependenciesRule: finite_orbit_certificate · Uses: G001, S016





S018 · impliesBefore

start=2

After

record each state before its first successor calculation

Conditions: none

Start with the specified point itself,not its first successor.

Step identifiers and dependenciesRule: orbit_initial_state · Uses: G001, S017





S019 · calculationBefore

point2 step1 product := mul(0, 2)

After

point2 step1 product = 0

Conditions: none

Multiply the current state by the original coefficient a,retaining its sign.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S018





S020 · calculationBefore

point2 step1 affine value := sum(0, 9)

After

point2 step1 affine value = 9

Conditions: none

Then add the original constant b;this integer is not yet the canonical state.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S019





S021 · impliesBefore

Euclidean division of 9 by 10

After

9=0·10+9

Conditions: none

Check the transition using quotient and nonnegative remainder;n>0 and0≤remainder<n ensure uniqueness.

Step identifiers and dependenciesRule: orbit_successor · Uses: G001, S020





S022 · calculationBefore

point2 step2 product := mul(0, 9)

After

point2 step2 product = 0

Conditions: none

Multiply the current state by the original coefficient a,retaining its sign.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S021





S023 · calculationBefore

point2 step2 affine value := sum(0, 9)

After

point2 step2 affine value = 9

Conditions: none

Then add the original constant b;this integer is not yet the canonical state.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S022





S024 · impliesBefore

Euclidean division of 9 by 10

After

9=0·10+9

Conditions: none

Check the transition using quotient and nonnegative remainder;n>0 and0≤remainder<n ensure uniqueness.

Step identifiers and dependenciesRule: orbit_successor · Uses: G001, S023





S025 · impliesBefore

distinct trace=[2, 9]; first repeated state=9

After

cycle_start=1; starting-point least period=null

Conditions: none

The first repeated state locates the cycle entry.If it is the initial point,the preceding states are distinct,so the first return is the least positive period.If entry is later,the initial point lies outside the cycle and never returns.

Step identifiers and dependenciesRule: finite_orbit_certificate · Uses: G001, S024





S026 · impliesBefore

start=3

After

record each state before its first successor calculation

Conditions: none

Start with the specified point itself,not its first successor.

Step identifiers and dependenciesRule: orbit_initial_state · Uses: G001, S025





S027 · calculationBefore

point3 step1 product := mul(0, 3)

After

point3 step1 product = 0

Conditions: none

Multiply the current state by the original coefficient a,retaining its sign.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S026





S028 · calculationBefore

point3 step1 affine value := sum(0, 9)

After

point3 step1 affine value = 9

Conditions: none

Then add the original constant b;this integer is not yet the canonical state.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S027





S029 · impliesBefore

Euclidean division of 9 by 10

After

9=0·10+9

Conditions: none

Check the transition using quotient and nonnegative remainder;n>0 and0≤remainder<n ensure uniqueness.

Step identifiers and dependenciesRule: orbit_successor · Uses: G001, S028





S030 · calculationBefore

point3 step2 product := mul(0, 9)

After

point3 step2 product = 0

Conditions: none

Multiply the current state by the original coefficient a,retaining its sign.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S029





S031 · calculationBefore

point3 step2 affine value := sum(0, 9)

After

point3 step2 affine value = 9

Conditions: none

Then add the original constant b;this integer is not yet the canonical state.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S030





S032 · impliesBefore

Euclidean division of 9 by 10

After

9=0·10+9

Conditions: none

Check the transition using quotient and nonnegative remainder;n>0 and0≤remainder<n ensure uniqueness.

Step identifiers and dependenciesRule: orbit_successor · Uses: G001, S031





S033 · impliesBefore

distinct trace=[3, 9]; first repeated state=9

After

cycle_start=1; starting-point least period=null

Conditions: none

The first repeated state locates the cycle entry.If it is the initial point,the preceding states are distinct,so the first return is the least positive period.If entry is later,the initial point lies outside the cycle and never returns.

Step identifiers and dependenciesRule: finite_orbit_certificate · Uses: G001, S032





S034 · impliesBefore

start=4

After

record each state before its first successor calculation

Conditions: none

Start with the specified point itself,not its first successor.

Step identifiers and dependenciesRule: orbit_initial_state · Uses: G001, S033





S035 · calculationBefore

point4 step1 product := mul(0, 4)

After

point4 step1 product = 0

Conditions: none

Multiply the current state by the original coefficient a,retaining its sign.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S034





S036 · calculationBefore

point4 step1 affine value := sum(0, 9)

After

point4 step1 affine value = 9

Conditions: none

Then add the original constant b;this integer is not yet the canonical state.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S035





S037 · impliesBefore

Euclidean division of 9 by 10

After

9=0·10+9

Conditions: none

Check the transition using quotient and nonnegative remainder;n>0 and0≤remainder<n ensure uniqueness.

Step identifiers and dependenciesRule: orbit_successor · Uses: G001, S036





S038 · calculationBefore

point4 step2 product := mul(0, 9)

After

point4 step2 product = 0

Conditions: none

Multiply the current state by the original coefficient a,retaining its sign.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S037





S039 · calculationBefore

point4 step2 affine value := sum(0, 9)

After

point4 step2 affine value = 9

Conditions: none

Then add the original constant b;this integer is not yet the canonical state.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S038





S040 · impliesBefore

Euclidean division of 9 by 10

After

9=0·10+9

Conditions: none

Check the transition using quotient and nonnegative remainder;n>0 and0≤remainder<n ensure uniqueness.

Step identifiers and dependenciesRule: orbit_successor · Uses: G001, S039





S041 · impliesBefore

distinct trace=[4, 9]; first repeated state=9

After

cycle_start=1; starting-point least period=null

Conditions: none

The first repeated state locates the cycle entry.If it is the initial point,the preceding states are distinct,so the first return is the least positive period.If entry is later,the initial point lies outside the cycle and never returns.

Step identifiers and dependenciesRule: finite_orbit_certificate · Uses: G001, S040





S042 · impliesBefore

start=5

After

record each state before its first successor calculation

Conditions: none

Start with the specified point itself,not its first successor.

Step identifiers and dependenciesRule: orbit_initial_state · Uses: G001, S041





S043 · calculationBefore

point5 step1 product := mul(0, 5)

After

point5 step1 product = 0

Conditions: none

Multiply the current state by the original coefficient a,retaining its sign.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S042





S044 · calculationBefore

point5 step1 affine value := sum(0, 9)

After

point5 step1 affine value = 9

Conditions: none

Then add the original constant b;this integer is not yet the canonical state.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S043





S045 · impliesBefore

Euclidean division of 9 by 10

After

9=0·10+9

Conditions: none

Check the transition using quotient and nonnegative remainder;n>0 and0≤remainder<n ensure uniqueness.

Step identifiers and dependenciesRule: orbit_successor · Uses: G001, S044





S046 · calculationBefore

point5 step2 product := mul(0, 9)

After

point5 step2 product = 0

Conditions: none

Multiply the current state by the original coefficient a,retaining its sign.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S045





S047 · calculationBefore

point5 step2 affine value := sum(0, 9)

After

point5 step2 affine value = 9

Conditions: none

Then add the original constant b;this integer is not yet the canonical state.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S046





S048 · impliesBefore

Euclidean division of 9 by 10

After

9=0·10+9

Conditions: none

Check the transition using quotient and nonnegative remainder;n>0 and0≤remainder<n ensure uniqueness.

Step identifiers and dependenciesRule: orbit_successor · Uses: G001, S047





S049 · impliesBefore

distinct trace=[5, 9]; first repeated state=9

After

cycle_start=1; starting-point least period=null

Conditions: none

The first repeated state locates the cycle entry.If it is the initial point,the preceding states are distinct,so the first return is the least positive period.If entry is later,the initial point lies outside the cycle and never returns.

Step identifiers and dependenciesRule: finite_orbit_certificate · Uses: G001, S048





S050 · impliesBefore

start=6

After

record each state before its first successor calculation

Conditions: none

Start with the specified point itself,not its first successor.

Step identifiers and dependenciesRule: orbit_initial_state · Uses: G001, S049





S051 · calculationBefore

point6 step1 product := mul(0, 6)

After

point6 step1 product = 0

Conditions: none

Multiply the current state by the original coefficient a,retaining its sign.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S050





S052 · calculationBefore

point6 step1 affine value := sum(0, 9)

After

point6 step1 affine value = 9

Conditions: none

Then add the original constant b;this integer is not yet the canonical state.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S051





S053 · impliesBefore

Euclidean division of 9 by 10

After

9=0·10+9

Conditions: none

Check the transition using quotient and nonnegative remainder;n>0 and0≤remainder<n ensure uniqueness.

Step identifiers and dependenciesRule: orbit_successor · Uses: G001, S052





S054 · calculationBefore

point6 step2 product := mul(0, 9)

After

point6 step2 product = 0

Conditions: none

Multiply the current state by the original coefficient a,retaining its sign.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S053





S055 · calculationBefore

point6 step2 affine value := sum(0, 9)

After

point6 step2 affine value = 9

Conditions: none

Then add the original constant b;this integer is not yet the canonical state.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S054





S056 · impliesBefore

Euclidean division of 9 by 10

After

9=0·10+9

Conditions: none

Check the transition using quotient and nonnegative remainder;n>0 and0≤remainder<n ensure uniqueness.

Step identifiers and dependenciesRule: orbit_successor · Uses: G001, S055





S057 · impliesBefore

distinct trace=[6, 9]; first repeated state=9

After

cycle_start=1; starting-point least period=null

Conditions: none

The first repeated state locates the cycle entry.If it is the initial point,the preceding states are distinct,so the first return is the least positive period.If entry is later,the initial point lies outside the cycle and never returns.

Step identifiers and dependenciesRule: finite_orbit_certificate · Uses: G001, S056





S058 · impliesBefore

start=7

After

record each state before its first successor calculation

Conditions: none

Start with the specified point itself,not its first successor.

Step identifiers and dependenciesRule: orbit_initial_state · Uses: G001, S057





S059 · calculationBefore

point7 step1 product := mul(0, 7)

After

point7 step1 product = 0

Conditions: none

Multiply the current state by the original coefficient a,retaining its sign.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S058





S060 · calculationBefore

point7 step1 affine value := sum(0, 9)

After

point7 step1 affine value = 9

Conditions: none

Then add the original constant b;this integer is not yet the canonical state.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S059





S061 · impliesBefore

Euclidean division of 9 by 10

After

9=0·10+9

Conditions: none

Check the transition using quotient and nonnegative remainder;n>0 and0≤remainder<n ensure uniqueness.

Step identifiers and dependenciesRule: orbit_successor · Uses: G001, S060





S062 · calculationBefore

point7 step2 product := mul(0, 9)

After

point7 step2 product = 0

Conditions: none

Multiply the current state by the original coefficient a,retaining its sign.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S061





S063 · calculationBefore

point7 step2 affine value := sum(0, 9)

After

point7 step2 affine value = 9

Conditions: none

Then add the original constant b;this integer is not yet the canonical state.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S062





S064 · impliesBefore

Euclidean division of 9 by 10

After

9=0·10+9

Conditions: none

Check the transition using quotient and nonnegative remainder;n>0 and0≤remainder<n ensure uniqueness.

Step identifiers and dependenciesRule: orbit_successor · Uses: G001, S063





S065 · impliesBefore

distinct trace=[7, 9]; first repeated state=9

After

cycle_start=1; starting-point least period=null

Conditions: none

The first repeated state locates the cycle entry.If it is the initial point,the preceding states are distinct,so the first return is the least positive period.If entry is later,the initial point lies outside the cycle and never returns.

Step identifiers and dependenciesRule: finite_orbit_certificate · Uses: G001, S064





S066 · impliesBefore

start=8

After

record each state before its first successor calculation

Conditions: none

Start with the specified point itself,not its first successor.

Step identifiers and dependenciesRule: orbit_initial_state · Uses: G001, S065





S067 · calculationBefore

point8 step1 product := mul(0, 8)

After

point8 step1 product = 0

Conditions: none

Multiply the current state by the original coefficient a,retaining its sign.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S066





S068 · calculationBefore

point8 step1 affine value := sum(0, 9)

After

point8 step1 affine value = 9

Conditions: none

Then add the original constant b;this integer is not yet the canonical state.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S067





S069 · impliesBefore

Euclidean division of 9 by 10

After

9=0·10+9

Conditions: none

Check the transition using quotient and nonnegative remainder;n>0 and0≤remainder<n ensure uniqueness.

Step identifiers and dependenciesRule: orbit_successor · Uses: G001, S068





S070 · calculationBefore

point8 step2 product := mul(0, 9)

After

point8 step2 product = 0

Conditions: none

Multiply the current state by the original coefficient a,retaining its sign.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S069





S071 · calculationBefore

point8 step2 affine value := sum(0, 9)

After

point8 step2 affine value = 9

Conditions: none

Then add the original constant b;this integer is not yet the canonical state.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S070





S072 · impliesBefore

Euclidean division of 9 by 10

After

9=0·10+9

Conditions: none

Check the transition using quotient and nonnegative remainder;n>0 and0≤remainder<n ensure uniqueness.

Step identifiers and dependenciesRule: orbit_successor · Uses: G001, S071





S073 · impliesBefore

distinct trace=[8, 9]; first repeated state=9

After

cycle_start=1; starting-point least period=null

Conditions: none

The first repeated state locates the cycle entry.If it is the initial point,the preceding states are distinct,so the first return is the least positive period.If entry is later,the initial point lies outside the cycle and never returns.

Step identifiers and dependenciesRule: finite_orbit_certificate · Uses: G001, S072





S074 · impliesBefore

start=9

After

record each state before its first successor calculation

Conditions: none

Start with the specified point itself,not its first successor.

Step identifiers and dependenciesRule: orbit_initial_state · Uses: G001, S073





S075 · calculationBefore

point9 step1 product := mul(0, 9)

After

point9 step1 product = 0

Conditions: none

Multiply the current state by the original coefficient a,retaining its sign.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S074





S076 · calculationBefore

point9 step1 affine value := sum(0, 9)

After

point9 step1 affine value = 9

Conditions: none

Then add the original constant b;this integer is not yet the canonical state.

Step identifiers and dependenciesRule: exact_rational_arithmetic · Uses: G001, S075





S077 · impliesBefore

Euclidean division of 9 by 10

After

9=0·10+9

Conditions: none

Check the transition using quotient and nonnegative remainder;n>0 and0≤remainder<n ensure uniqueness.

Step identifiers and dependenciesRule: orbit_successor · Uses: G001, S076





S078 · impliesBefore

distinct trace=[9]; first repeated state=9

After

cycle_start=0; starting-point least period=1

Conditions: none

The first repeated state locates the cycle entry.If it is the initial point,the preceding states are distinct,so the first return is the least positive period.If entry is later,the initial point lies outside the cycle and never returns.

Step identifiers and dependenciesRule: finite_orbit_certificate · Uses: G001, S077





S079 · impliesBefore

[[0, nonperiodic point], [1, nonperiodic point], [2, nonperiodic point], [3, nonperiodic point], [4, nonperiodic point], [5, nonperiodic point], [6, nonperiodic point], [7, nonperiodic point], [8, nonperiodic point], [9, 1]]

After

least positive period≤6: [9]

Conditions: none

Cover all n states;select only periodic points whose least positive period is at most the bound,not transient points that merely enter a cycle.

Step identifiers and dependenciesRule: least_period_bound_filter · Uses: G001, S078









## Reverse checks


- S079 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S078 · premise_and_result_audit — Replay the cycle of this fixed self-map;return or nonreturn is certified only for this complete finite model,not an unspecified system.
- S077 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S076 · premise_and_result_audit — Recompute point9 step1 affine value with exact rational arithmetic, not rounded decimals.
- S075 · premise_and_result_audit — Recompute point9 step1 product with exact rational arithmetic, not rounded decimals.
- S074 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S073 · premise_and_result_audit — Replay the cycle of this fixed self-map;return or nonreturn is certified only for this complete finite model,not an unspecified system.
- S072 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S071 · premise_and_result_audit — Recompute point8 step2 affine value with exact rational arithmetic, not rounded decimals.
- S070 · premise_and_result_audit — Recompute point8 step2 product with exact rational arithmetic, not rounded decimals.
- S069 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S068 · premise_and_result_audit — Recompute point8 step1 affine value with exact rational arithmetic, not rounded decimals.
- S067 · premise_and_result_audit — Recompute point8 step1 product with exact rational arithmetic, not rounded decimals.
- S066 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S065 · premise_and_result_audit — Replay the cycle of this fixed self-map;return or nonreturn is certified only for this complete finite model,not an unspecified system.
- S064 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S063 · premise_and_result_audit — Recompute point7 step2 affine value with exact rational arithmetic, not rounded decimals.
- S062 · premise_and_result_audit — Recompute point7 step2 product with exact rational arithmetic, not rounded decimals.
- S061 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S060 · premise_and_result_audit — Recompute point7 step1 affine value with exact rational arithmetic, not rounded decimals.
- S059 · premise_and_result_audit — Recompute point7 step1 product with exact rational arithmetic, not rounded decimals.
- S058 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S057 · premise_and_result_audit — Replay the cycle of this fixed self-map;return or nonreturn is certified only for this complete finite model,not an unspecified system.
- S056 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S055 · premise_and_result_audit — Recompute point6 step2 affine value with exact rational arithmetic, not rounded decimals.
- S054 · premise_and_result_audit — Recompute point6 step2 product with exact rational arithmetic, not rounded decimals.
- S053 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S052 · premise_and_result_audit — Recompute point6 step1 affine value with exact rational arithmetic, not rounded decimals.
- S051 · premise_and_result_audit — Recompute point6 step1 product with exact rational arithmetic, not rounded decimals.
- S050 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S049 · premise_and_result_audit — Replay the cycle of this fixed self-map;return or nonreturn is certified only for this complete finite model,not an unspecified system.
- S048 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S047 · premise_and_result_audit — Recompute point5 step2 affine value with exact rational arithmetic, not rounded decimals.
- S046 · premise_and_result_audit — Recompute point5 step2 product with exact rational arithmetic, not rounded decimals.
- S045 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S044 · premise_and_result_audit — Recompute point5 step1 affine value with exact rational arithmetic, not rounded decimals.
- S043 · premise_and_result_audit — Recompute point5 step1 product with exact rational arithmetic, not rounded decimals.
- S042 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S041 · premise_and_result_audit — Replay the cycle of this fixed self-map;return or nonreturn is certified only for this complete finite model,not an unspecified system.
- S040 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S039 · premise_and_result_audit — Recompute point4 step2 affine value with exact rational arithmetic, not rounded decimals.
- S038 · premise_and_result_audit — Recompute point4 step2 product with exact rational arithmetic, not rounded decimals.
- S037 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S036 · premise_and_result_audit — Recompute point4 step1 affine value with exact rational arithmetic, not rounded decimals.
- S035 · premise_and_result_audit — Recompute point4 step1 product with exact rational arithmetic, not rounded decimals.
- S034 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S033 · premise_and_result_audit — Replay the cycle of this fixed self-map;return or nonreturn is certified only for this complete finite model,not an unspecified system.
- S032 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S031 · premise_and_result_audit — Recompute point3 step2 affine value with exact rational arithmetic, not rounded decimals.
- S030 · premise_and_result_audit — Recompute point3 step2 product with exact rational arithmetic, not rounded decimals.
- S029 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S028 · premise_and_result_audit — Recompute point3 step1 affine value with exact rational arithmetic, not rounded decimals.
- S027 · premise_and_result_audit — Recompute point3 step1 product with exact rational arithmetic, not rounded decimals.
- S026 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S025 · premise_and_result_audit — Replay the cycle of this fixed self-map;return or nonreturn is certified only for this complete finite model,not an unspecified system.
- S024 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S023 · premise_and_result_audit — Recompute point2 step2 affine value with exact rational arithmetic, not rounded decimals.
- S022 · premise_and_result_audit — Recompute point2 step2 product with exact rational arithmetic, not rounded decimals.
- S021 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S020 · premise_and_result_audit — Recompute point2 step1 affine value with exact rational arithmetic, not rounded decimals.
- S019 · premise_and_result_audit — Recompute point2 step1 product with exact rational arithmetic, not rounded decimals.
- S018 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S017 · premise_and_result_audit — Replay the cycle of this fixed self-map;return or nonreturn is certified only for this complete finite model,not an unspecified system.
- S016 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S015 · premise_and_result_audit — Recompute point1 step2 affine value with exact rational arithmetic, not rounded decimals.
- S014 · premise_and_result_audit — Recompute point1 step2 product with exact rational arithmetic, not rounded decimals.
- S013 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S012 · premise_and_result_audit — Recompute point1 step1 affine value with exact rational arithmetic, not rounded decimals.
- S011 · premise_and_result_audit — Recompute point1 step1 product with exact rational arithmetic, not rounded decimals.
- S010 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S009 · premise_and_result_audit — Replay the cycle of this fixed self-map;return or nonreturn is certified only for this complete finite model,not an unspecified system.
- S008 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S007 · premise_and_result_audit — Recompute point0 step2 affine value with exact rational arithmetic, not rounded decimals.
- S006 · premise_and_result_audit — Recompute point0 step2 product with exact rational arithmetic, not rounded decimals.
- S005 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S004 · premise_and_result_audit — Recompute point0 step1 affine value with exact rational arithmetic, not rounded decimals.
- S003 · premise_and_result_audit — Recompute point0 step1 product with exact rational arithmetic, not rounded decimals.
- S002 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
- S001 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.





## Result

(10, 0, 9, 6, [[0, nonperiodic-point], [1, nonperiodic-point], [2, nonperiodic-point], [3, nonperiodic-point], [4, nonperiodic-point], [5, nonperiodic-point], [6, nonperiodic-point], [7, nonperiodic-point], [8, nonperiodic-point], [9, 1]], [9])

The full substitutions and premise checks give the original answer; source identity,format and status are unchanged.





## This question review and source binding

Review date: 2026-10-26

Original questions, answers, step expressions, numeric ASTs and historical records are retained. Source candidate labels remain historical and are not overwritten as formal proof.

Source hashes and review receipts
- input commit: 0f7be61e2c22317a4075561dc822c87d881a50db
- original question SHA-256: 99b76a5a0e8a7c47d06740422dd8fd8b3bb718fa9d9ade3acecabad9a26b325d
- candidate record SHA-256: 3ee1fbc738472f14c273fdc8f47f89ca8b2240c956d53550f7c99fae594a0bf1
- semantic review receipt SHA-256: 312ae86315346b8955842a547cb2d09246e1f826755f72c2a51f042e5c7d5c56
- question-first witness SHA-256: 831f449ed41ff9144a290e534aa32adf7252d15b81c16ed5886a7dfd65dee70c
- Lean: NOT_RUN · human review: NOT_PERFORMED

[Same-source full JSON](https://ocme.evemisslab.com/data/question-derivations/questions/q-20261013-advance-20261021-r03-orbit-fixed-periodic-0093.json)




