OCMEBilingual mathematics & derivations繁體中文

Explore related knowledge and questions →

Question 16655: Totient Multiplicativity Requires the Coprimality Premise

On this page
  1. Original question and givens
  2. Definition and scope
  3. Step-by-step derivation
  4. Reverse checks
  5. Result
  6. This question review and source binding

Return to catalogue page 84

← Question derivation index · Original question batch

R0032-16655 · q-20261014-advance-20261101-r06-euler-totient-function-0080

Original question and givens

Positive integers m=2, n=11 must satisfy gcd(m,n)=1. Enumerate each complete 1-through-modulus representative range. Give (m,n,phi_m,phi_n,phi_mn,product,equal?,instance_only_with_coprimality).

  • G001 — Positive integers m=2, n=11 must satisfy gcd(m,n)=1. Enumerate each complete 1-through-modulus representative range. Give (m,n,phi_m,phi_n,phi_mn,product,equal?,instance_only_with_coprimality).

Definition and scope

Use the original question domain, assumptions and cited MKO definitions. This item has second-context mathematical and bilingual review, with the model, answer and every arithmetic step independently recomputed from the original parameters; the source question remains a candidate.

Step-by-step derivation

S001 · implies

Before

totient multiplicativity coprimality premise:original nonnegative Euclidean inputs=[2, 11]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[2, 11, 0, 2], [11, 2, 5, 1], [2, 1, 2, 0]];terminal positive gcd=1

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001

S002 · calculation

Before

totient multiplicativity original modulus product := mul(2, 11)

After

totient multiplicativity original modulus product = 22

Conditions: none

Compute exactly from original roles and established intermediates,retaining indices,denominators,signs and operation roles.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S001

S003 · implies

Before

left modulus representative1:original nonnegative Euclidean inputs=[1, 2]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[1, 2, 0, 1], [2, 1, 2, 0]];terminal positive gcd=1

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S002

S004 · implies

Before

left modulus:original representative k=1 in1..2;verified gcd(k,n)=1

After

coprime indicator=1;include representative=Yes

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S003

S005 · implies

Before

left modulus representative2:original nonnegative Euclidean inputs=[2, 2]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[2, 2, 1, 0]];terminal positive gcd=2

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S004

S006 · implies

Before

left modulus:original representative k=2 in1..2;verified gcd(k,n)=2

After

coprime indicator=0;include representative=No

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S005

S007 · calculation

Before

left modulus exact coprime indicator count := sum(1, 0)

After

left modulus exact coprime indicator count = 1

Conditions: none

Compute exactly from original roles and established intermediates,retaining indices,denominators,signs and operation roles.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S006

S008 · implies

Before

left modulus:complete representative range1..2;all selected coprime representatives=[1]

After

phi(2)=1;representatives_1_through_n

Conditions: none

Sum every indicator for the exact count.This is complete finite counting for the supplied n,not a general formula extrapolated from samples.

Step identifiers and dependencies

Rule: totient_complete_finite_count_not_sample_formula · Uses: G001, S007

S009 · implies

Before

right modulus representative1:original nonnegative Euclidean inputs=[1, 11]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[1, 11, 0, 1], [11, 1, 11, 0]];terminal positive gcd=1

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S008

S010 · implies

Before

right modulus:original representative k=1 in1..11;verified gcd(k,n)=1

After

coprime indicator=1;include representative=Yes

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S009

S011 · implies

Before

right modulus representative2:original nonnegative Euclidean inputs=[2, 11]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[2, 11, 0, 2], [11, 2, 5, 1], [2, 1, 2, 0]];terminal positive gcd=1

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S010

S012 · implies

Before

right modulus:original representative k=2 in1..11;verified gcd(k,n)=1

After

coprime indicator=1;include representative=Yes

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S011

S013 · implies

Before

right modulus representative3:original nonnegative Euclidean inputs=[3, 11]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[3, 11, 0, 3], [11, 3, 3, 2], [3, 2, 1, 1], [2, 1, 2, 0]];terminal positive gcd=1

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S012

S014 · implies

Before

right modulus:original representative k=3 in1..11;verified gcd(k,n)=1

After

coprime indicator=1;include representative=Yes

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S013

S015 · implies

Before

right modulus representative4:original nonnegative Euclidean inputs=[4, 11]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[4, 11, 0, 4], [11, 4, 2, 3], [4, 3, 1, 1], [3, 1, 3, 0]];terminal positive gcd=1

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S014

S016 · implies

Before

right modulus:original representative k=4 in1..11;verified gcd(k,n)=1

After

coprime indicator=1;include representative=Yes

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S015

S017 · implies

Before

right modulus representative5:original nonnegative Euclidean inputs=[5, 11]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[5, 11, 0, 5], [11, 5, 2, 1], [5, 1, 5, 0]];terminal positive gcd=1

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S016

S018 · implies

Before

right modulus:original representative k=5 in1..11;verified gcd(k,n)=1

After

coprime indicator=1;include representative=Yes

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S017

S019 · implies

Before

right modulus representative6:original nonnegative Euclidean inputs=[6, 11]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[6, 11, 0, 6], [11, 6, 1, 5], [6, 5, 1, 1], [5, 1, 5, 0]];terminal positive gcd=1

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S018

S020 · implies

Before

right modulus:original representative k=6 in1..11;verified gcd(k,n)=1

After

coprime indicator=1;include representative=Yes

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S019

S021 · implies

Before

right modulus representative7:original nonnegative Euclidean inputs=[7, 11]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[7, 11, 0, 7], [11, 7, 1, 4], [7, 4, 1, 3], [4, 3, 1, 1], [3, 1, 3, 0]];terminal positive gcd=1

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S020

S022 · implies

Before

right modulus:original representative k=7 in1..11;verified gcd(k,n)=1

After

coprime indicator=1;include representative=Yes

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S021

S023 · implies

Before

right modulus representative8:original nonnegative Euclidean inputs=[8, 11]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[8, 11, 0, 8], [11, 8, 1, 3], [8, 3, 2, 2], [3, 2, 1, 1], [2, 1, 2, 0]];terminal positive gcd=1

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S022

S024 · implies

Before

right modulus:original representative k=8 in1..11;verified gcd(k,n)=1

After

coprime indicator=1;include representative=Yes

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S023

S025 · implies

Before

right modulus representative9:original nonnegative Euclidean inputs=[9, 11]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[9, 11, 0, 9], [11, 9, 1, 2], [9, 2, 4, 1], [2, 1, 2, 0]];terminal positive gcd=1

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S024

S026 · implies

Before

right modulus:original representative k=9 in1..11;verified gcd(k,n)=1

After

coprime indicator=1;include representative=Yes

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S025

S027 · implies

Before

right modulus representative10:original nonnegative Euclidean inputs=[10, 11]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[10, 11, 0, 10], [11, 10, 1, 1], [10, 1, 10, 0]];terminal positive gcd=1

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S026

S028 · implies

Before

right modulus:original representative k=10 in1..11;verified gcd(k,n)=1

After

coprime indicator=1;include representative=Yes

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S027

S029 · implies

Before

right modulus representative11:original nonnegative Euclidean inputs=[11, 11]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[11, 11, 1, 0]];terminal positive gcd=11

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S028

S030 · implies

Before

right modulus:original representative k=11 in1..11;verified gcd(k,n)=11

After

coprime indicator=0;include representative=No

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S029

S031 · calculation

Before

right modulus exact coprime indicator count := sum(1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0)

After

right modulus exact coprime indicator count = 10

Conditions: none

Compute exactly from original roles and established intermediates,retaining indices,denominators,signs and operation roles.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S030

S032 · implies

Before

right modulus:complete representative range1..11;all selected coprime representatives=[1, 2, 3, 4, 5, 6, 7, 8, 9, 10]

After

phi(11)=10;representatives_1_through_n

Conditions: none

Sum every indicator for the exact count.This is complete finite counting for the supplied n,not a general formula extrapolated from samples.

Step identifiers and dependencies

Rule: totient_complete_finite_count_not_sample_formula · Uses: G001, S031

S033 · implies

Before

product modulus representative1:original nonnegative Euclidean inputs=[1, 22]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[1, 22, 0, 1], [22, 1, 22, 0]];terminal positive gcd=1

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S032

S034 · implies

Before

product modulus:original representative k=1 in1..22;verified gcd(k,n)=1

After

coprime indicator=1;include representative=Yes

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S033

S035 · implies

Before

product modulus representative2:original nonnegative Euclidean inputs=[2, 22]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[2, 22, 0, 2], [22, 2, 11, 0]];terminal positive gcd=2

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S034

S036 · implies

Before

product modulus:original representative k=2 in1..22;verified gcd(k,n)=2

After

coprime indicator=0;include representative=No

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S035

S037 · implies

Before

product modulus representative3:original nonnegative Euclidean inputs=[3, 22]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[3, 22, 0, 3], [22, 3, 7, 1], [3, 1, 3, 0]];terminal positive gcd=1

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S036

S038 · implies

Before

product modulus:original representative k=3 in1..22;verified gcd(k,n)=1

After

coprime indicator=1;include representative=Yes

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S037

S039 · implies

Before

product modulus representative4:original nonnegative Euclidean inputs=[4, 22]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[4, 22, 0, 4], [22, 4, 5, 2], [4, 2, 2, 0]];terminal positive gcd=2

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S038

S040 · implies

Before

product modulus:original representative k=4 in1..22;verified gcd(k,n)=2

After

coprime indicator=0;include representative=No

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S039

S041 · implies

Before

product modulus representative5:original nonnegative Euclidean inputs=[5, 22]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[5, 22, 0, 5], [22, 5, 4, 2], [5, 2, 2, 1], [2, 1, 2, 0]];terminal positive gcd=1

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S040

S042 · implies

Before

product modulus:original representative k=5 in1..22;verified gcd(k,n)=1

After

coprime indicator=1;include representative=Yes

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S041

S043 · implies

Before

product modulus representative6:original nonnegative Euclidean inputs=[6, 22]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[6, 22, 0, 6], [22, 6, 3, 4], [6, 4, 1, 2], [4, 2, 2, 0]];terminal positive gcd=2

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S042

S044 · implies

Before

product modulus:original representative k=6 in1..22;verified gcd(k,n)=2

After

coprime indicator=0;include representative=No

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S043

S045 · implies

Before

product modulus representative7:original nonnegative Euclidean inputs=[7, 22]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[7, 22, 0, 7], [22, 7, 3, 1], [7, 1, 7, 0]];terminal positive gcd=1

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S044

S046 · implies

Before

product modulus:original representative k=7 in1..22;verified gcd(k,n)=1

After

coprime indicator=1;include representative=Yes

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S045

S047 · implies

Before

product modulus representative8:original nonnegative Euclidean inputs=[8, 22]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[8, 22, 0, 8], [22, 8, 2, 6], [8, 6, 1, 2], [6, 2, 3, 0]];terminal positive gcd=2

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S046

S048 · implies

Before

product modulus:original representative k=8 in1..22;verified gcd(k,n)=2

After

coprime indicator=0;include representative=No

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S047

S049 · implies

Before

product modulus representative9:original nonnegative Euclidean inputs=[9, 22]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[9, 22, 0, 9], [22, 9, 2, 4], [9, 4, 2, 1], [4, 1, 4, 0]];terminal positive gcd=1

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S048

S050 · implies

Before

product modulus:original representative k=9 in1..22;verified gcd(k,n)=1

After

coprime indicator=1;include representative=Yes

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S049

S051 · implies

Before

product modulus representative10:original nonnegative Euclidean inputs=[10, 22]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[10, 22, 0, 10], [22, 10, 2, 2], [10, 2, 5, 0]];terminal positive gcd=2

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S050

S052 · implies

Before

product modulus:original representative k=10 in1..22;verified gcd(k,n)=2

After

coprime indicator=0;include representative=No

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S051

S053 · implies

Before

product modulus representative11:original nonnegative Euclidean inputs=[11, 22]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[11, 22, 0, 11], [22, 11, 2, 0]];terminal positive gcd=11

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S052

S054 · implies

Before

product modulus:original representative k=11 in1..22;verified gcd(k,n)=11

After

coprime indicator=0;include representative=No

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S053

S055 · implies

Before

product modulus representative12:original nonnegative Euclidean inputs=[12, 22]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[12, 22, 0, 12], [22, 12, 1, 10], [12, 10, 1, 2], [10, 2, 5, 0]];terminal positive gcd=2

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S054

S056 · implies

Before

product modulus:original representative k=12 in1..22;verified gcd(k,n)=2

After

coprime indicator=0;include representative=No

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S055

S057 · implies

Before

product modulus representative13:original nonnegative Euclidean inputs=[13, 22]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[13, 22, 0, 13], [22, 13, 1, 9], [13, 9, 1, 4], [9, 4, 2, 1], [4, 1, 4, 0]];terminal positive gcd=1

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S056

S058 · implies

Before

product modulus:original representative k=13 in1..22;verified gcd(k,n)=1

After

coprime indicator=1;include representative=Yes

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S057

S059 · implies

Before

product modulus representative14:original nonnegative Euclidean inputs=[14, 22]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[14, 22, 0, 14], [22, 14, 1, 8], [14, 8, 1, 6], [8, 6, 1, 2], [6, 2, 3, 0]];terminal positive gcd=2

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S058

S060 · implies

Before

product modulus:original representative k=14 in1..22;verified gcd(k,n)=2

After

coprime indicator=0;include representative=No

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S059

S061 · implies

Before

product modulus representative15:original nonnegative Euclidean inputs=[15, 22]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[15, 22, 0, 15], [22, 15, 1, 7], [15, 7, 2, 1], [7, 1, 7, 0]];terminal positive gcd=1

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S060

S062 · implies

Before

product modulus:original representative k=15 in1..22;verified gcd(k,n)=1

After

coprime indicator=1;include representative=Yes

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S061

S063 · implies

Before

product modulus representative16:original nonnegative Euclidean inputs=[16, 22]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[16, 22, 0, 16], [22, 16, 1, 6], [16, 6, 2, 4], [6, 4, 1, 2], [4, 2, 2, 0]];terminal positive gcd=2

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S062

S064 · implies

Before

product modulus:original representative k=16 in1..22;verified gcd(k,n)=2

After

coprime indicator=0;include representative=No

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S063

S065 · implies

Before

product modulus representative17:original nonnegative Euclidean inputs=[17, 22]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[17, 22, 0, 17], [22, 17, 1, 5], [17, 5, 3, 2], [5, 2, 2, 1], [2, 1, 2, 0]];terminal positive gcd=1

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S064

S066 · implies

Before

product modulus:original representative k=17 in1..22;verified gcd(k,n)=1

After

coprime indicator=1;include representative=Yes

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S065

S067 · implies

Before

product modulus representative18:original nonnegative Euclidean inputs=[18, 22]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[18, 22, 0, 18], [22, 18, 1, 4], [18, 4, 4, 2], [4, 2, 2, 0]];terminal positive gcd=2

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S066

S068 · implies

Before

product modulus:original representative k=18 in1..22;verified gcd(k,n)=2

After

coprime indicator=0;include representative=No

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S067

S069 · implies

Before

product modulus representative19:original nonnegative Euclidean inputs=[19, 22]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[19, 22, 0, 19], [22, 19, 1, 3], [19, 3, 6, 1], [3, 1, 3, 0]];terminal positive gcd=1

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S068

S070 · implies

Before

product modulus:original representative k=19 in1..22;verified gcd(k,n)=1

After

coprime indicator=1;include representative=Yes

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S069

S071 · implies

Before

product modulus representative20:original nonnegative Euclidean inputs=[20, 22]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[20, 22, 0, 20], [22, 20, 1, 2], [20, 2, 10, 0]];terminal positive gcd=2

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S070

S072 · implies

Before

product modulus:original representative k=20 in1..22;verified gcd(k,n)=2

After

coprime indicator=0;include representative=No

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S071

S073 · implies

Before

product modulus representative21:original nonnegative Euclidean inputs=[21, 22]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[21, 22, 0, 21], [22, 21, 1, 1], [21, 1, 21, 0]];terminal positive gcd=1

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S072

S074 · implies

Before

product modulus:original representative k=21 in1..22;verified gcd(k,n)=1

After

coprime indicator=1;include representative=Yes

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S073

S075 · implies

Before

product modulus representative22:original nonnegative Euclidean inputs=[22, 22]

After

division rows[a,b,q,r] with a=q*b+r and0<=r<b=[[22, 22, 1, 0]];terminal positive gcd=22

Conditions: none

Each row gives a=q*b+r with its remainder bound.The pairs(a,b)and(b,r)have exactly the same common divisors.Repeat until the second entry is0;the last nonzero value is the gcd.This is an exact chain,not a floating-point approximation or an unexplained answer.

Step identifiers and dependencies

Rule: totient_Euclidean_division_chain_preserves_common_divisors · Uses: G001, S074

S076 · implies

Before

product modulus:original representative k=22 in1..22;verified gcd(k,n)=22

After

coprime indicator=0;include representative=No

Conditions: none

Test gcd=1 for every original representative1 through n exactly once.Include only qualifying representatives.For n=1 the representative is1 and gcd(1,1)=1;do not switch to a different0-through-n−1 list.

Step identifiers and dependencies

Rule: totient_every_original_representative_unit_gcd_test · Uses: G001, S075

S077 · calculation

Before

product modulus exact coprime indicator count := sum(1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 0, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0)

After

product modulus exact coprime indicator count = 10

Conditions: none

Compute exactly from original roles and established intermediates,retaining indices,denominators,signs and operation roles.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S076

S078 · implies

Before

product modulus:complete representative range1..22;all selected coprime representatives=[1, 3, 5, 7, 9, 13, 15, 17, 19, 21]

After

phi(22)=10;representatives_1_through_n

Conditions: none

Sum every indicator for the exact count.This is complete finite counting for the supplied n,not a general formula extrapolated from samples.

Step identifiers and dependencies

Rule: totient_complete_finite_count_not_sample_formula · Uses: G001, S077

S079 · calculation

Before

totient supplied instance product of counts := mul(1, 10)

After

totient supplied instance product of counts = 10

Conditions: none

Compute exactly from original roles and established intermediates,retaining indices,denominators,signs and operation roles.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S078

S080 · implies

Before

original coprime inputs=[2, 11];gcd=1;product modulus=22;exact totients=[1, 10, 10]

After

phi(m)*phi(n)=10;same supplied-instance equality=Yes;instance_only_with_coprimality

Conditions: none

First verify coprimality and all three allowed moduli,then count the three totients completely and compare.This checks the supplied instance only.Non-coprime inputs do not qualify,and numeric agreement is not a proof of the universal multiplicativity theorem.

Step identifiers and dependencies

Rule: totient_coprime_instance_not_unrestricted_multiplicativity_proof · Uses: G001, S079

Reverse checks

  • S080 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S079 · premise_and_result_audit — Recompute totient supplied instance product of counts with exact rational arithmetic, not rounded decimals.
  • S078 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S077 · premise_and_result_audit — Recompute product modulus exact coprime indicator count with exact rational arithmetic, not rounded decimals.
  • S076 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S075 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S074 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S073 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S072 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S071 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S070 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S069 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S068 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S067 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S066 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S065 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S064 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S063 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S062 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S061 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S060 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S059 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S058 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S057 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S056 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S055 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S054 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S053 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S052 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S051 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S050 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S049 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S048 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S047 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S046 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S045 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S044 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S043 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S042 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S041 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S040 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S039 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S038 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S037 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S036 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S035 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S034 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S033 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S032 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S031 · premise_and_result_audit — Recompute right modulus exact coprime indicator count with exact rational arithmetic, not rounded decimals.
  • S030 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S029 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S028 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S027 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S026 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S025 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S024 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S023 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S022 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S021 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S020 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S019 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S018 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S017 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S016 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S015 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S014 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S013 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S012 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S011 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S010 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S009 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S008 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S007 · premise_and_result_audit — Recompute left modulus exact coprime indicator count with exact rational arithmetic, not rounded decimals.
  • S006 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S005 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S004 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S003 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S002 · premise_and_result_audit — Recompute totient multiplicativity original modulus product with exact rational arithmetic, not rounded decimals.
  • S001 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.

Result

(2, 11, 1, 10, 10, 10, Yes, instance_only_with_coprimality)

The full substitutions and premise checks give the original answer; source identity,format and status are unchanged.

This question review and source binding

Review date: 2026-10-26

Original questions, answers, step expressions, numeric ASTs and historical records are retained. Source candidate labels remain historical and are not overwritten as formal proof.

Source hashes and review receipts
  • input commit: 0f7be61e2c22317a4075561dc822c87d881a50db
  • original question SHA-256: f0912a061666c95346617ae069f296c6b057c2a4a9dda97fd0740a94d168024b
  • candidate record SHA-256: 84516a4b77b05c5f8649f4a54546ba689f0be603c3397326e0c91ce1f1eed464
  • semantic review receipt SHA-256: d64b4e08bda1c25dd393b7c7e4140a8734610a9b84ae47e6f0adcff7f30a0b8e
  • question-first witness SHA-256: 790fd6623c04ba52a6ffb0a95cea52b532a02b23bb9453926d2d9f7a825fdec8
  • Lean: NOT_RUN · human review: NOT_PERFORMED
Same-source full JSON