Question 22134: An Omitted Divisor Must Be a Discriminative Missing-Term Witness

On this page

Original question and givens
Definition and scope
Step-by-step derivation
Reverse checks
Result
This question review and source binding

← Question derivation index · Original question batch

R0043-22134 · q-20261014-advance-20261110-r06-mobius-inversion-finite-divisors-0084

Original question and givens

Use positive integer n=110, exact integer arithmetic function f(k)=a*k+b with a=9, b=1. F(m) sums f(d) over every positive divisor d of m. Inversion uses mu(d)*F(m/d); complete prime multiplicities determine mu, with mu(1)=1. Do not replace d|m by d≤m or use only prime/proper divisors. Omit divisor=1. Give (n, all_divisors, omitted_divisor, partial_divisors, complete_value, partial_value, f_n, incomplete_certificate, boundary).

G001 — Use positive integer n=110, exact integer arithmetic function f(k)=a*k+b with a=9, b=1. F(m) sums f(d) over every positive divisor d of m. Inversion uses mu(d)*F(m/d); complete prime multiplicities determine mu, with mu(1)=1. Do not replace d|m by d≤m or use only prime/proper divisors. Omit divisor=1. Give (n, all_divisors, omitted_divisor, partial_divisors, complete_value, partial_value, f_n, incomplete_certificate, boundary).

Definition and scope

Use the original question domain, assumptions and cited MKO definitions. This item has second-context mathematical and bilingual review, with the model, answer and every arithmetic step independently recomputed from the original parameters; the source question remains a candidate.

mko-mobius-inversion-finite-divisors

Step-by-step derivation

S001 · implies

Before

source operation=mobinv-incomplete-divisor-boundary;original snapshot and mathematics retained

After

explicit ordered source output fields=[n, all_divisors, omitted_divisor, partial_divisors, complete_value, partial_value, f_n, incomplete_certificate, boundary]

Conditions: none

Retain the historical interface marker and list ordered source fields without JavaScript.MVT fields come from the original mode,without padding or answer-shape inference.Tags and fixed No markers retain their claim scope.

Step identifiers and dependencies

Rule: source_ordered_interface_explicit_without_javascript · Uses: G001

S002 · implies

Before

Mobius inversion ORIGINAL inverse:actual positive input=110;check complete integer range1..110

After

ALL positive divisors INCREASING=[1, 2, 5, 10, 11, 22, 55, 110];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S001

S003 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor1:actual positive input for mu=1

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S002

S004 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor1:input=1;COMPLETE prime multiset=[];distinct primes=[]

After

mu=1;empty product case=Yes;repeated prime=No

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S003

S005 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor1 := div(110, 1)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor1 = 110

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S004

S006 · implies

Before

Mobius inversion ORIGINAL inverse F(n/1):actual positive input=110;check complete integer range1..110

After

ALL positive divisors INCREASING=[1, 2, 5, 10, 11, 22, 55, 110];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S005

S007 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(1) ORIGINAL a times divisor := mul(9, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(1) ORIGINAL a times divisor = 9

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S006

S008 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(1) plus ORIGINAL b := sum(9, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(1) plus ORIGINAL b = 10

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S007

S009 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(2) ORIGINAL a times divisor := mul(9, 2)

After

Mobius inversion ORIGINAL inverse F(n/1) f(2) ORIGINAL a times divisor = 18

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S008

S010 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(2) plus ORIGINAL b := sum(18, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(2) plus ORIGINAL b = 19

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S009

S011 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(5) ORIGINAL a times divisor := mul(9, 5)

After

Mobius inversion ORIGINAL inverse F(n/1) f(5) ORIGINAL a times divisor = 45

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S010

S012 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(5) plus ORIGINAL b := sum(45, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(5) plus ORIGINAL b = 46

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S011

S013 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(10) ORIGINAL a times divisor := mul(9, 10)

After

Mobius inversion ORIGINAL inverse F(n/1) f(10) ORIGINAL a times divisor = 90

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S012

S014 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(10) plus ORIGINAL b := sum(90, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(10) plus ORIGINAL b = 91

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S013

S015 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(11) ORIGINAL a times divisor := mul(9, 11)

After

Mobius inversion ORIGINAL inverse F(n/1) f(11) ORIGINAL a times divisor = 99

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S014

S016 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(11) plus ORIGINAL b := sum(99, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(11) plus ORIGINAL b = 100

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S015

S017 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(22) ORIGINAL a times divisor := mul(9, 22)

After

Mobius inversion ORIGINAL inverse F(n/1) f(22) ORIGINAL a times divisor = 198

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S016

S018 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(22) plus ORIGINAL b := sum(198, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(22) plus ORIGINAL b = 199

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S017

S019 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(55) ORIGINAL a times divisor := mul(9, 55)

After

Mobius inversion ORIGINAL inverse F(n/1) f(55) ORIGINAL a times divisor = 495

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S018

S020 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(55) plus ORIGINAL b := sum(495, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(55) plus ORIGINAL b = 496

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S019

S021 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(110) ORIGINAL a times divisor := mul(9, 110)

After

Mobius inversion ORIGINAL inverse F(n/1) f(110) ORIGINAL a times divisor = 990

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S020

S022 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(110) plus ORIGINAL b := sum(990, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(110) plus ORIGINAL b = 991

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S021

S023 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) full forward divisor sum := sum(10, 19, 46, 91, 100, 199, 496, 991)

After

Mobius inversion ORIGINAL inverse F(n/1) full forward divisor sum = 1952

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S022

S024 · calculation

Before

Mobius inversion ORIGINAL inverse mu(1) times SAME F(n/1) := mul(1, 1952)

After

Mobius inversion ORIGINAL inverse mu(1) times SAME F(n/1) = 1952

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S023

S025 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor2:actual positive input for mu=2

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S024

S026 · implies

Before

ORIGINAL positive integer absolute magnitude=2>1

After

initialize remaining=n,prime multiset empty;invariant product(extracted)*remaining=n;every smaller trial divisor has been exhausted

Conditions: none

Divide only by an actual divisor and exhaust smaller candidates,which justifies primality of each extracted divisor without assuming n is prime.

Step identifiers and dependencies

Rule: upf_factorization_remaining_product_invariant · Uses: G001, S025

S027 · calculation

Before

upf canonical complete product factor0 := mul(1, 2)

After

upf canonical complete product factor0 = 2

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S026

S028 · implies

Before

exhausted trial divisors below2;terminal remaining=2;d*d>remaining;ORIGINAL n=2

After

complete increasing prime multiset=[2];full product=2;a composite terminal remainder would have an already tested smaller divisor

Conditions: none

If a terminal remainder greater than1 were composite,its least prime factor would already have been exhausted,a contradiction.The final entry is therefore prime.This certifies this instance;general existence follows by strong induction,recursively splitting a composite into smaller positive factors.

Step identifiers and dependencies

Rule: upf_final_prime_remainder_complete_existence_instance · Uses: G001, S027

S029 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor2:input=2;COMPLETE prime multiset=[2];distinct primes=[2]

After

mu=-1;empty product case=No;repeated prime=No

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S028

S030 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor2 := div(110, 2)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor2 = 55

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S029

S031 · implies

Before

Mobius inversion ORIGINAL inverse F(n/2):actual positive input=55;check complete integer range1..55

After

ALL positive divisors INCREASING=[1, 5, 11, 55];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S030

S032 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(1) ORIGINAL a times divisor := mul(9, 1)

After

Mobius inversion ORIGINAL inverse F(n/2) f(1) ORIGINAL a times divisor = 9

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S031

S033 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(1) plus ORIGINAL b := sum(9, 1)

After

Mobius inversion ORIGINAL inverse F(n/2) f(1) plus ORIGINAL b = 10

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S032

S034 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(5) ORIGINAL a times divisor := mul(9, 5)

After

Mobius inversion ORIGINAL inverse F(n/2) f(5) ORIGINAL a times divisor = 45

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S033

S035 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(5) plus ORIGINAL b := sum(45, 1)

After

Mobius inversion ORIGINAL inverse F(n/2) f(5) plus ORIGINAL b = 46

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S034

S036 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(11) ORIGINAL a times divisor := mul(9, 11)

After

Mobius inversion ORIGINAL inverse F(n/2) f(11) ORIGINAL a times divisor = 99

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S035

S037 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(11) plus ORIGINAL b := sum(99, 1)

After

Mobius inversion ORIGINAL inverse F(n/2) f(11) plus ORIGINAL b = 100

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S036

S038 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(55) ORIGINAL a times divisor := mul(9, 55)

After

Mobius inversion ORIGINAL inverse F(n/2) f(55) ORIGINAL a times divisor = 495

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S037

S039 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(55) plus ORIGINAL b := sum(495, 1)

After

Mobius inversion ORIGINAL inverse F(n/2) f(55) plus ORIGINAL b = 496

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S038

S040 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) full forward divisor sum := sum(10, 46, 100, 496)

After

Mobius inversion ORIGINAL inverse F(n/2) full forward divisor sum = 652

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S039

S041 · calculation

Before

Mobius inversion ORIGINAL inverse mu(2) times SAME F(n/2) := mul(-1, 652)

After

Mobius inversion ORIGINAL inverse mu(2) times SAME F(n/2) = -652

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S040

S042 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor5:actual positive input for mu=5

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S041

S043 · implies

Before

ORIGINAL positive integer absolute magnitude=5>1

After

initialize remaining=n,prime multiset empty;invariant product(extracted)*remaining=n;every smaller trial divisor has been exhausted

Conditions: none

Divide only by an actual divisor and exhaust smaller candidates,which justifies primality of each extracted divisor without assuming n is prime.

Step identifiers and dependencies

Rule: upf_factorization_remaining_product_invariant · Uses: G001, S042

S044 · implies

Before

next divisor=2;previous remaining=5;all smaller divisors exhausted

After

extracted multiplicity=0;next remaining=5;remaining modulo2=1;extracted multiset=[]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S043

S045 · calculation

Before

upf canonical complete product factor0 := mul(1, 5)

After

upf canonical complete product factor0 = 5

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S044

S046 · implies

Before

exhausted trial divisors below3;terminal remaining=5;d*d>remaining;ORIGINAL n=5

After

complete increasing prime multiset=[5];full product=5;a composite terminal remainder would have an already tested smaller divisor

Conditions: none

Step identifiers and dependencies

Rule: upf_final_prime_remainder_complete_existence_instance · Uses: G001, S045

S047 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor5:input=5;COMPLETE prime multiset=[5];distinct primes=[5]

After

mu=-1;empty product case=No;repeated prime=No

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S046

S048 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor5 := div(110, 5)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor5 = 22

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S047

S049 · implies

Before

Mobius inversion ORIGINAL inverse F(n/5):actual positive input=22;check complete integer range1..22

After

ALL positive divisors INCREASING=[1, 2, 11, 22];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S048

S050 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(1) ORIGINAL a times divisor := mul(9, 1)

After

Mobius inversion ORIGINAL inverse F(n/5) f(1) ORIGINAL a times divisor = 9

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S049

S051 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(1) plus ORIGINAL b := sum(9, 1)

After

Mobius inversion ORIGINAL inverse F(n/5) f(1) plus ORIGINAL b = 10

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S050

S052 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(2) ORIGINAL a times divisor := mul(9, 2)

After

Mobius inversion ORIGINAL inverse F(n/5) f(2) ORIGINAL a times divisor = 18

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S051

S053 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(2) plus ORIGINAL b := sum(18, 1)

After

Mobius inversion ORIGINAL inverse F(n/5) f(2) plus ORIGINAL b = 19

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S052

S054 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(11) ORIGINAL a times divisor := mul(9, 11)

After

Mobius inversion ORIGINAL inverse F(n/5) f(11) ORIGINAL a times divisor = 99

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S053

S055 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(11) plus ORIGINAL b := sum(99, 1)

After

Mobius inversion ORIGINAL inverse F(n/5) f(11) plus ORIGINAL b = 100

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S054

S056 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(22) ORIGINAL a times divisor := mul(9, 22)

After

Mobius inversion ORIGINAL inverse F(n/5) f(22) ORIGINAL a times divisor = 198

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S055

S057 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(22) plus ORIGINAL b := sum(198, 1)

After

Mobius inversion ORIGINAL inverse F(n/5) f(22) plus ORIGINAL b = 199

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S056

S058 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) full forward divisor sum := sum(10, 19, 100, 199)

After

Mobius inversion ORIGINAL inverse F(n/5) full forward divisor sum = 328

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S057

S059 · calculation

Before

Mobius inversion ORIGINAL inverse mu(5) times SAME F(n/5) := mul(-1, 328)

After

Mobius inversion ORIGINAL inverse mu(5) times SAME F(n/5) = -328

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S058

S060 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor10:actual positive input for mu=10

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S059

S061 · implies

Before

ORIGINAL positive integer absolute magnitude=10>1

After

initialize remaining=n,prime multiset empty;invariant product(extracted)*remaining=n;every smaller trial divisor has been exhausted

Conditions: none

Divide only by an actual divisor and exhaust smaller candidates,which justifies primality of each extracted divisor without assuming n is prime.

Step identifiers and dependencies

Rule: upf_factorization_remaining_product_invariant · Uses: G001, S060

S062 · calculation

Before

upf extract divisor2 occurrence0 := div(10, 2)

After

upf extract divisor2 occurrence0 = 5

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S061

S063 · implies

Before

next divisor=2;previous remaining=10;all smaller divisors exhausted

After

extracted multiplicity=1;next remaining=5;remaining modulo2=1;extracted multiset=[2]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S062

S064 · calculation

Before

upf canonical complete product factor0 := mul(1, 2)

After

upf canonical complete product factor0 = 2

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S063

S065 · calculation

Before

upf canonical complete product factor1 := mul(2, 5)

After

upf canonical complete product factor1 = 10

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S064

S066 · implies

Before

exhausted trial divisors below3;terminal remaining=5;d*d>remaining;ORIGINAL n=10

After

complete increasing prime multiset=[2, 5];full product=10;a composite terminal remainder would have an already tested smaller divisor

Conditions: none

Step identifiers and dependencies

Rule: upf_final_prime_remainder_complete_existence_instance · Uses: G001, S065

S067 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor10:input=10;COMPLETE prime multiset=[2, 5];distinct primes=[2, 5]

After

mu=1;empty product case=No;repeated prime=No

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S066

S068 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor10 := div(110, 10)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor10 = 11

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S067

S069 · implies

Before

Mobius inversion ORIGINAL inverse F(n/10):actual positive input=11;check complete integer range1..11

After

ALL positive divisors INCREASING=[1, 11];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S068

S070 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/10) f(1) ORIGINAL a times divisor := mul(9, 1)

After

Mobius inversion ORIGINAL inverse F(n/10) f(1) ORIGINAL a times divisor = 9

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S069

S071 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/10) f(1) plus ORIGINAL b := sum(9, 1)

After

Mobius inversion ORIGINAL inverse F(n/10) f(1) plus ORIGINAL b = 10

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S070

S072 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/10) f(11) ORIGINAL a times divisor := mul(9, 11)

After

Mobius inversion ORIGINAL inverse F(n/10) f(11) ORIGINAL a times divisor = 99

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S071

S073 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/10) f(11) plus ORIGINAL b := sum(99, 1)

After

Mobius inversion ORIGINAL inverse F(n/10) f(11) plus ORIGINAL b = 100

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S072

S074 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/10) full forward divisor sum := sum(10, 100)

After

Mobius inversion ORIGINAL inverse F(n/10) full forward divisor sum = 110

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S073

S075 · calculation

Before

Mobius inversion ORIGINAL inverse mu(10) times SAME F(n/10) := mul(1, 110)

After

Mobius inversion ORIGINAL inverse mu(10) times SAME F(n/10) = 110

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S074

S076 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor11:actual positive input for mu=11

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S075

S077 · implies

Before

ORIGINAL positive integer absolute magnitude=11>1

After

initialize remaining=n,prime multiset empty;invariant product(extracted)*remaining=n;every smaller trial divisor has been exhausted

Conditions: none

Divide only by an actual divisor and exhaust smaller candidates,which justifies primality of each extracted divisor without assuming n is prime.

Step identifiers and dependencies

Rule: upf_factorization_remaining_product_invariant · Uses: G001, S076

S078 · implies

Before

next divisor=2;previous remaining=11;all smaller divisors exhausted

After

extracted multiplicity=0;next remaining=11;remaining modulo2=1;extracted multiset=[]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S077

S079 · implies

Before

next divisor=3;previous remaining=11;all smaller divisors exhausted

After

extracted multiplicity=0;next remaining=11;remaining modulo3=2;extracted multiset=[]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S078

S080 · calculation

Before

upf canonical complete product factor0 := mul(1, 11)

After

upf canonical complete product factor0 = 11

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S079

S081 · implies

Before

exhausted trial divisors below4;terminal remaining=11;d*d>remaining;ORIGINAL n=11

After

complete increasing prime multiset=[11];full product=11;a composite terminal remainder would have an already tested smaller divisor

Conditions: none

Step identifiers and dependencies

Rule: upf_final_prime_remainder_complete_existence_instance · Uses: G001, S080

S082 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor11:input=11;COMPLETE prime multiset=[11];distinct primes=[11]

After

mu=-1;empty product case=No;repeated prime=No

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S081

S083 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor11 := div(110, 11)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor11 = 10

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S082

S084 · implies

Before

Mobius inversion ORIGINAL inverse F(n/11):actual positive input=10;check complete integer range1..10

After

ALL positive divisors INCREASING=[1, 2, 5, 10];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S083

S085 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/11) f(1) ORIGINAL a times divisor := mul(9, 1)

After

Mobius inversion ORIGINAL inverse F(n/11) f(1) ORIGINAL a times divisor = 9

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S084

S086 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/11) f(1) plus ORIGINAL b := sum(9, 1)

After

Mobius inversion ORIGINAL inverse F(n/11) f(1) plus ORIGINAL b = 10

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S085

S087 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/11) f(2) ORIGINAL a times divisor := mul(9, 2)

After

Mobius inversion ORIGINAL inverse F(n/11) f(2) ORIGINAL a times divisor = 18

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S086

S088 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/11) f(2) plus ORIGINAL b := sum(18, 1)

After

Mobius inversion ORIGINAL inverse F(n/11) f(2) plus ORIGINAL b = 19

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S087

S089 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/11) f(5) ORIGINAL a times divisor := mul(9, 5)

After

Mobius inversion ORIGINAL inverse F(n/11) f(5) ORIGINAL a times divisor = 45

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S088

S090 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/11) f(5) plus ORIGINAL b := sum(45, 1)

After

Mobius inversion ORIGINAL inverse F(n/11) f(5) plus ORIGINAL b = 46

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S089

S091 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/11) f(10) ORIGINAL a times divisor := mul(9, 10)

After

Mobius inversion ORIGINAL inverse F(n/11) f(10) ORIGINAL a times divisor = 90

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S090

S092 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/11) f(10) plus ORIGINAL b := sum(90, 1)

After

Mobius inversion ORIGINAL inverse F(n/11) f(10) plus ORIGINAL b = 91

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S091

S093 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/11) full forward divisor sum := sum(10, 19, 46, 91)

After

Mobius inversion ORIGINAL inverse F(n/11) full forward divisor sum = 166

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S092

S094 · calculation

Before

Mobius inversion ORIGINAL inverse mu(11) times SAME F(n/11) := mul(-1, 166)

After

Mobius inversion ORIGINAL inverse mu(11) times SAME F(n/11) = -166

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S093

S095 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor22:actual positive input for mu=22

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S094

S096 · implies

Before

ORIGINAL positive integer absolute magnitude=22>1

After

initialize remaining=n,prime multiset empty;invariant product(extracted)*remaining=n;every smaller trial divisor has been exhausted

Conditions: none

Divide only by an actual divisor and exhaust smaller candidates,which justifies primality of each extracted divisor without assuming n is prime.

Step identifiers and dependencies

Rule: upf_factorization_remaining_product_invariant · Uses: G001, S095

S097 · calculation

Before

upf extract divisor2 occurrence0 := div(22, 2)

After

upf extract divisor2 occurrence0 = 11

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S096

S098 · implies

Before

next divisor=2;previous remaining=22;all smaller divisors exhausted

After

extracted multiplicity=1;next remaining=11;remaining modulo2=1;extracted multiset=[2]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S097

S099 · implies

Before

next divisor=3;previous remaining=11;all smaller divisors exhausted

After

extracted multiplicity=0;next remaining=11;remaining modulo3=2;extracted multiset=[2]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S098

S100 · calculation

Before

upf canonical complete product factor0 := mul(1, 2)

After

upf canonical complete product factor0 = 2

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S099

S101 · calculation

Before

upf canonical complete product factor1 := mul(2, 11)

After

upf canonical complete product factor1 = 22

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S100

S102 · implies

Before

exhausted trial divisors below4;terminal remaining=11;d*d>remaining;ORIGINAL n=22

After

complete increasing prime multiset=[2, 11];full product=22;a composite terminal remainder would have an already tested smaller divisor

Conditions: none

Step identifiers and dependencies

Rule: upf_final_prime_remainder_complete_existence_instance · Uses: G001, S101

S103 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor22:input=22;COMPLETE prime multiset=[2, 11];distinct primes=[2, 11]

After

mu=1;empty product case=No;repeated prime=No

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S102

S104 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor22 := div(110, 22)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor22 = 5

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S103

S105 · implies

Before

Mobius inversion ORIGINAL inverse F(n/22):actual positive input=5;check complete integer range1..5

After

ALL positive divisors INCREASING=[1, 5];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S104

S106 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/22) f(1) ORIGINAL a times divisor := mul(9, 1)

After

Mobius inversion ORIGINAL inverse F(n/22) f(1) ORIGINAL a times divisor = 9

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S105

S107 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/22) f(1) plus ORIGINAL b := sum(9, 1)

After

Mobius inversion ORIGINAL inverse F(n/22) f(1) plus ORIGINAL b = 10

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S106

S108 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/22) f(5) ORIGINAL a times divisor := mul(9, 5)

After

Mobius inversion ORIGINAL inverse F(n/22) f(5) ORIGINAL a times divisor = 45

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S107

S109 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/22) f(5) plus ORIGINAL b := sum(45, 1)

After

Mobius inversion ORIGINAL inverse F(n/22) f(5) plus ORIGINAL b = 46

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S108

S110 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/22) full forward divisor sum := sum(10, 46)

After

Mobius inversion ORIGINAL inverse F(n/22) full forward divisor sum = 56

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S109

S111 · calculation

Before

Mobius inversion ORIGINAL inverse mu(22) times SAME F(n/22) := mul(1, 56)

After

Mobius inversion ORIGINAL inverse mu(22) times SAME F(n/22) = 56

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S110

S112 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor55:actual positive input for mu=55

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S111

S113 · implies

Before

ORIGINAL positive integer absolute magnitude=55>1

After

initialize remaining=n,prime multiset empty;invariant product(extracted)*remaining=n;every smaller trial divisor has been exhausted

Conditions: none

Divide only by an actual divisor and exhaust smaller candidates,which justifies primality of each extracted divisor without assuming n is prime.

Step identifiers and dependencies

Rule: upf_factorization_remaining_product_invariant · Uses: G001, S112

S114 · implies

Before

next divisor=2;previous remaining=55;all smaller divisors exhausted

After

extracted multiplicity=0;next remaining=55;remaining modulo2=1;extracted multiset=[]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S113

S115 · implies

Before

next divisor=3;previous remaining=55;all smaller divisors exhausted

After

extracted multiplicity=0;next remaining=55;remaining modulo3=1;extracted multiset=[]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S114

S116 · implies

Before

next divisor=4;previous remaining=55;all smaller divisors exhausted

After

extracted multiplicity=0;next remaining=55;remaining modulo4=3;extracted multiset=[]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S115

S117 · calculation

Before

upf extract divisor5 occurrence0 := div(55, 5)

After

upf extract divisor5 occurrence0 = 11

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S116

S118 · implies

Before

next divisor=5;previous remaining=55;all smaller divisors exhausted

After

extracted multiplicity=1;next remaining=11;remaining modulo5=1;extracted multiset=[5]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S117

S119 · calculation

Before

upf canonical complete product factor0 := mul(1, 5)

After

upf canonical complete product factor0 = 5

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S118

S120 · calculation

Before

upf canonical complete product factor1 := mul(5, 11)

After

upf canonical complete product factor1 = 55

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S119

S121 · implies

Before

exhausted trial divisors below6;terminal remaining=11;d*d>remaining;ORIGINAL n=55

After

complete increasing prime multiset=[5, 11];full product=55;a composite terminal remainder would have an already tested smaller divisor

Conditions: none

Step identifiers and dependencies

Rule: upf_final_prime_remainder_complete_existence_instance · Uses: G001, S120

S122 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor55:input=55;COMPLETE prime multiset=[5, 11];distinct primes=[5, 11]

After

mu=1;empty product case=No;repeated prime=No

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S121

S123 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor55 := div(110, 55)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor55 = 2

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S122

S124 · implies

Before

Mobius inversion ORIGINAL inverse F(n/55):actual positive input=2;check complete integer range1..2

After

ALL positive divisors INCREASING=[1, 2];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S123

S125 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/55) f(1) ORIGINAL a times divisor := mul(9, 1)

After

Mobius inversion ORIGINAL inverse F(n/55) f(1) ORIGINAL a times divisor = 9

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S124

S126 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/55) f(1) plus ORIGINAL b := sum(9, 1)

After

Mobius inversion ORIGINAL inverse F(n/55) f(1) plus ORIGINAL b = 10

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S125

S127 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/55) f(2) ORIGINAL a times divisor := mul(9, 2)

After

Mobius inversion ORIGINAL inverse F(n/55) f(2) ORIGINAL a times divisor = 18

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S126

S128 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/55) f(2) plus ORIGINAL b := sum(18, 1)

After

Mobius inversion ORIGINAL inverse F(n/55) f(2) plus ORIGINAL b = 19

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S127

S129 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/55) full forward divisor sum := sum(10, 19)

After

Mobius inversion ORIGINAL inverse F(n/55) full forward divisor sum = 29

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S128

S130 · calculation

Before

Mobius inversion ORIGINAL inverse mu(55) times SAME F(n/55) := mul(1, 29)

After

Mobius inversion ORIGINAL inverse mu(55) times SAME F(n/55) = 29

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S129

S131 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor110:actual positive input for mu=110

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S130

S132 · implies

Before

ORIGINAL positive integer absolute magnitude=110>1

After

initialize remaining=n,prime multiset empty;invariant product(extracted)*remaining=n;every smaller trial divisor has been exhausted

Conditions: none

Divide only by an actual divisor and exhaust smaller candidates,which justifies primality of each extracted divisor without assuming n is prime.

Step identifiers and dependencies

Rule: upf_factorization_remaining_product_invariant · Uses: G001, S131

S133 · calculation

Before

upf extract divisor2 occurrence0 := div(110, 2)

After

upf extract divisor2 occurrence0 = 55

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S132

S134 · implies

Before

next divisor=2;previous remaining=110;all smaller divisors exhausted

After

extracted multiplicity=1;next remaining=55;remaining modulo2=1;extracted multiset=[2]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S133

S135 · implies

Before

next divisor=3;previous remaining=55;all smaller divisors exhausted

After

extracted multiplicity=0;next remaining=55;remaining modulo3=1;extracted multiset=[2]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S134

S136 · implies

Before

next divisor=4;previous remaining=55;all smaller divisors exhausted

After

extracted multiplicity=0;next remaining=55;remaining modulo4=3;extracted multiset=[2]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S135

S137 · calculation

Before

upf extract divisor5 occurrence1 := div(55, 5)

After

upf extract divisor5 occurrence1 = 11

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S136

S138 · implies

Before

next divisor=5;previous remaining=55;all smaller divisors exhausted

After

extracted multiplicity=1;next remaining=11;remaining modulo5=1;extracted multiset=[2, 5]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S137

S139 · calculation

Before

upf canonical complete product factor0 := mul(1, 2)

After

upf canonical complete product factor0 = 2

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S138

S140 · calculation

Before

upf canonical complete product factor1 := mul(2, 5)

After

upf canonical complete product factor1 = 10

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S139

S141 · calculation

Before

upf canonical complete product factor2 := mul(10, 11)

After

upf canonical complete product factor2 = 110

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S140

S142 · implies

Before

exhausted trial divisors below6;terminal remaining=11;d*d>remaining;ORIGINAL n=110

After

complete increasing prime multiset=[2, 5, 11];full product=110;a composite terminal remainder would have an already tested smaller divisor

Conditions: none

Step identifiers and dependencies

Rule: upf_final_prime_remainder_complete_existence_instance · Uses: G001, S141

S143 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor110:input=110;COMPLETE prime multiset=[2, 5, 11];distinct primes=[2, 5, 11]

After

mu=-1;empty product case=No;repeated prime=No

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S142

S144 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor110 := div(110, 110)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor110 = 1

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S143

S145 · implies

Before

Mobius inversion ORIGINAL inverse F(n/110):actual positive input=1;check complete integer range1..1

After

ALL positive divisors INCREASING=[1];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S144

S146 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/110) f(1) ORIGINAL a times divisor := mul(9, 1)

After

Mobius inversion ORIGINAL inverse F(n/110) f(1) ORIGINAL a times divisor = 9

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S145

S147 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/110) f(1) plus ORIGINAL b := sum(9, 1)

After

Mobius inversion ORIGINAL inverse F(n/110) f(1) plus ORIGINAL b = 10

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S146

S148 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/110) full forward divisor sum := sum(10)

After

Mobius inversion ORIGINAL inverse F(n/110) full forward divisor sum = 10

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S147

S149 · calculation

Before

Mobius inversion ORIGINAL inverse mu(110) times SAME F(n/110) := mul(-1, 10)

After

Mobius inversion ORIGINAL inverse mu(110) times SAME F(n/110) = -10

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S148

S150 · calculation

Before

Mobius inversion ORIGINAL inverse complete inverse-term sum := sum(1952, -652, -328, 110, -166, 56, 29, -10)

After

Mobius inversion ORIGINAL inverse complete inverse-term sum = 991

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S149

S151 · calculation

Before

Mobius inversion ORIGINAL inverse direct ORIGINAL a times n := mul(9, 110)

After

Mobius inversion ORIGINAL inverse direct ORIGINAL a times n = 990

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S150

S152 · calculation

Before

Mobius inversion ORIGINAL inverse direct plus ORIGINAL b := sum(990, 1)

After

Mobius inversion ORIGINAL inverse direct plus ORIGINAL b = 991

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S151

S153 · implies

Before

Mobius inversion ORIGINAL inverse:actual n=110;ALL [d,mu(d),n/d,F(n/d),mu(d)*F(n/d)] rows=[[1, 1, 110, 1952, 1952], [2, -1, 55, 652, -652], [5, -1, 22, 328, -328], [10, 1, 11, 110, 110], [11, -1, 10, 166, -166], [22, 1, 5, 56, 56], [55, 1, 2, 29, 29], [110, -1, 1, 10, -10]]

After

complete reconstructed=991;direct f(n)=991;sum_d mu(d)sum_e|n/d f(e)=sum_e|n f(e)sum_d|n/e mu(d)=f(n)

Conditions: none

Swap the finite sums over d*e|n.The inner Mobius sum is1 for n/e=1 and0 otherwise by pairing distinct-prime subsets,leaving only e=n.For n1,the d1 term and mu1=1 remain;do not mix indices from the alternate equivalent convention.

Step identifiers and dependencies

Rule: mobinv_general_finite_double_sum_and_Mobius_cancellation · Uses: G001, S152

S154 · calculation

Before

Mobius inversion ORIGINAL omitted-divisor partial sum := sum(-652, -328, 110, -166, 56, 29, -10)

After

Mobius inversion ORIGINAL omitted-divisor partial sum = -961

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S153

S155 · calculation

Before

Mobius inversion complete minus partial := sub(991, -961)

After

Mobius inversion complete minus partial = 1952

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S154

S156 · implies

Before

ORIGINAL full divisors=[1, 2, 5, 10, 11, 22, 55, 110];actual omitted divisor=1;remaining ORIGINAL-order divisors=[2, 5, 10, 11, 22, 55, 110]

After

complete=991=f(n)=991;partial=-961;lost term=1952!=0;incomplete_certificate fixed No

Conditions: none

The omitted value must be an actual divisor with nonzero contribution,so the partial result differs from the target.Omitting a zero term does not qualify this discriminative boundary.The No rejects the incomplete certificate,not the complete inversion.

Step identifiers and dependencies

Rule: mobinv_omission_actual_nonzero_discriminative_term · Uses: G001, S155

Reverse checks

S156 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S155 · premise_and_result_audit — Recompute Mobius inversion complete minus partial with exact rational arithmetic, not rounded decimals.
S154 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL omitted-divisor partial sum with exact rational arithmetic, not rounded decimals.
S153 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S152 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse direct plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S151 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse direct ORIGINAL a times n with exact rational arithmetic, not rounded decimals.
S150 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse complete inverse-term sum with exact rational arithmetic, not rounded decimals.
S149 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(110) times SAME F(n/110) with exact rational arithmetic, not rounded decimals.
S148 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/110) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S147 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/110) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S146 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/110) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S145 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S144 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor110 with exact rational arithmetic, not rounded decimals.
S143 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S142 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S141 · premise_and_result_audit — Recompute upf canonical complete product factor2 with exact rational arithmetic, not rounded decimals.
S140 · premise_and_result_audit — Recompute upf canonical complete product factor1 with exact rational arithmetic, not rounded decimals.
S139 · premise_and_result_audit — Recompute upf canonical complete product factor0 with exact rational arithmetic, not rounded decimals.
S138 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S137 · premise_and_result_audit — Recompute upf extract divisor5 occurrence1 with exact rational arithmetic, not rounded decimals.
S136 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S135 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S134 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S133 · premise_and_result_audit — Recompute upf extract divisor2 occurrence0 with exact rational arithmetic, not rounded decimals.
S132 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S131 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S130 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(55) times SAME F(n/55) with exact rational arithmetic, not rounded decimals.
S129 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/55) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S128 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/55) f(2) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S127 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/55) f(2) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S126 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/55) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S125 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/55) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S124 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S123 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor55 with exact rational arithmetic, not rounded decimals.
S122 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S121 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S120 · premise_and_result_audit — Recompute upf canonical complete product factor1 with exact rational arithmetic, not rounded decimals.
S119 · premise_and_result_audit — Recompute upf canonical complete product factor0 with exact rational arithmetic, not rounded decimals.
S118 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S117 · premise_and_result_audit — Recompute upf extract divisor5 occurrence0 with exact rational arithmetic, not rounded decimals.
S116 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S115 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S114 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S113 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S112 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S111 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(22) times SAME F(n/22) with exact rational arithmetic, not rounded decimals.
S110 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/22) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S109 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/22) f(5) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S108 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/22) f(5) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S107 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/22) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S106 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/22) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S105 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S104 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor22 with exact rational arithmetic, not rounded decimals.
S103 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S102 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S101 · premise_and_result_audit — Recompute upf canonical complete product factor1 with exact rational arithmetic, not rounded decimals.
S100 · premise_and_result_audit — Recompute upf canonical complete product factor0 with exact rational arithmetic, not rounded decimals.
S099 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S098 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S097 · premise_and_result_audit — Recompute upf extract divisor2 occurrence0 with exact rational arithmetic, not rounded decimals.
S096 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S095 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S094 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(11) times SAME F(n/11) with exact rational arithmetic, not rounded decimals.
S093 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/11) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S092 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/11) f(10) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S091 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/11) f(10) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S090 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/11) f(5) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S089 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/11) f(5) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S088 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/11) f(2) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S087 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/11) f(2) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S086 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/11) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S085 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/11) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S084 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S083 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor11 with exact rational arithmetic, not rounded decimals.
S082 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S081 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S080 · premise_and_result_audit — Recompute upf canonical complete product factor0 with exact rational arithmetic, not rounded decimals.
S079 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S078 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S077 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S076 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S075 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(10) times SAME F(n/10) with exact rational arithmetic, not rounded decimals.
S074 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/10) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S073 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/10) f(11) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S072 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/10) f(11) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S071 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/10) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S070 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/10) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S069 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S068 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor10 with exact rational arithmetic, not rounded decimals.
S067 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S066 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S065 · premise_and_result_audit — Recompute upf canonical complete product factor1 with exact rational arithmetic, not rounded decimals.
S064 · premise_and_result_audit — Recompute upf canonical complete product factor0 with exact rational arithmetic, not rounded decimals.
S063 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S062 · premise_and_result_audit — Recompute upf extract divisor2 occurrence0 with exact rational arithmetic, not rounded decimals.
S061 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S060 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S059 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(5) times SAME F(n/5) with exact rational arithmetic, not rounded decimals.
S058 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S057 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(22) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S056 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(22) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S055 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(11) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S054 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(11) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S053 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(2) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S052 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(2) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S051 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S050 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S049 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S048 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor5 with exact rational arithmetic, not rounded decimals.
S047 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S046 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S045 · premise_and_result_audit — Recompute upf canonical complete product factor0 with exact rational arithmetic, not rounded decimals.
S044 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S043 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S042 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S041 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(2) times SAME F(n/2) with exact rational arithmetic, not rounded decimals.
S040 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S039 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(55) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S038 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(55) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S037 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(11) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S036 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(11) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S035 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(5) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S034 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(5) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S033 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S032 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S031 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S030 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor2 with exact rational arithmetic, not rounded decimals.
S029 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S028 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S027 · premise_and_result_audit — Recompute upf canonical complete product factor0 with exact rational arithmetic, not rounded decimals.
S026 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S025 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S024 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(1) times SAME F(n/1) with exact rational arithmetic, not rounded decimals.
S023 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S022 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(110) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S021 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(110) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S020 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(55) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S019 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(55) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S018 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(22) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S017 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(22) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S016 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(11) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S015 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(11) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S014 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(10) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S013 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(10) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S012 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(5) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S011 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(5) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S010 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(2) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S009 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(2) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S008 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S007 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S006 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S005 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor1 with exact rational arithmetic, not rounded decimals.
S004 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S003 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S002 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S001 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.

Result

(110, [1, 2, 5, 10, 11, 22, 55, 110], 1, [2, 5, 10, 11, 22, 55, 110], 991, -961, 991, No, all_positive_divisors_and_consistent_d_to_n_over_d_indexing_required)

The full substitutions and premise checks give the original answer; source identity,format and status are unchanged.

This question review and source binding

Review date: 2026-10-26

Original questions, answers, step expressions, numeric ASTs and historical records are retained. Source candidate labels remain historical and are not overwritten as formal proof.

Source hashes and review receipts

input commit: 0f7be61e2c22317a4075561dc822c87d881a50db
original question SHA-256: 558a684e635d67cb0a0526fb0beaecc55226f8defb81391144c91440549a114c
candidate record SHA-256: dcf1d7babdc8c1dd19f4e23a8cc976718f72979bd20d6c7752d96ad080833c95
semantic review receipt SHA-256: 49cf6ec60211c92d1c0c302663af4d44479635dc8181fb61a20c3374288e21c5
question-first witness SHA-256: 10fd25b4643e5ff12753daceaa61f9f2499bf381f65ef96e9d21185c7c0d0c5e
Lean: NOT_RUN · human review: NOT_PERFORMED

Same-source full JSON