OCMEBilingual mathematics & derivations繁體中文

Explore related knowledge and questions →

Question 23045: Order Zero Is the Original Function; Later Orders Need the Recursive Chain

On this page
  1. Original question and givens
  2. Definition and scope
  3. Step-by-step derivation
  4. Reverse checks
  5. Result
  6. This question review and source binding

Return to catalogue page 116

← Question derivation index · Original question batch

R0045-23045 · q-20261014-advance-20261111-r02-higher-order-derivative-0020

Original question and givens

Use original low-to-high coefficients=[20, 40, 60, 80, 100, 120, 140] for f(t)=sum coefficients[k]*t^k and derivative order=3≥0. f^(0)=f and each further order differentiates the preceding function. The declared degree bound is coefficient-list length minus1; trailing zeros would make it an upper bound rather than a minimal degree. Give (declared_degree_bound, order, nonnegative_order, order_convention, polynomial_chain_certificate).

  • G001 — Use original low-to-high coefficients=[20, 40, 60, 80, 100, 120, 140] for f(t)=sum coefficients[k]*t^k and derivative order=3≥0. f^(0)=f and each further order differentiates the preceding function. The declared degree bound is coefficient-list length minus1; trailing zeros would make it an upper bound rather than a minimal degree. Give (declared_degree_bound, order, nonnegative_order, order_convention, polynomial_chain_certificate).

Definition and scope

Use the original question domain, assumptions and cited MKO definitions. This item has second-context mathematical and bilingual review, with the model, answer and every arithmetic step independently recomputed from the original parameters; the source question remains a candidate.

Step-by-step derivation

S001 · implies

Before

source operation=higher-order-qualification;original snapshot and mathematics retained

After

explicit ordered source output fields=[declared_degree_bound, order, nonnegative_order, order_convention, polynomial_chain_certificate]

Conditions: none

Retain the historical interface marker while listing source fields without JavaScript.Tags and No retain their claim scope;source-protocol ordering is not a mathematical proof.

Step identifiers and dependencies

Rule: source_ordered_interface_explicit_without_javascript · Uses: G001

S002 · implies

Before

ORIGINAL low-to-high coefficients=[20, 40, 60, 80, 100, 120, 140];declared order=3

After

declared degree BOUND=6=ORIGINAL length-1;initialize derivative order0 with the UNTRIMMED original list

Conditions: none

Length minus1 is the declared bound;do not trim trailing zeros.Order0 is the original function.The monomial rule and finite sums justify each polynomial derivative,not an infinite extrapolation for arbitrary functions.

Step identifiers and dependencies

Rule: higher_ORIGINAL_low_to_high_coefficients_degree_BOUND_order0 · Uses: G001, S001

S003 · calculation

Before

Higher derivative level1 ORIGINAL power1 coefficient product := mul(40, 1)

After

Higher derivative level1 ORIGINAL power1 coefficient product = 40

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S002

S004 · calculation

Before

Higher derivative level1 ORIGINAL power2 coefficient product := mul(60, 2)

After

Higher derivative level1 ORIGINAL power2 coefficient product = 120

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S003

S005 · calculation

Before

Higher derivative level1 ORIGINAL power3 coefficient product := mul(80, 3)

After

Higher derivative level1 ORIGINAL power3 coefficient product = 240

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S004

S006 · calculation

Before

Higher derivative level1 ORIGINAL power4 coefficient product := mul(100, 4)

After

Higher derivative level1 ORIGINAL power4 coefficient product = 400

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S005

S007 · calculation

Before

Higher derivative level1 ORIGINAL power5 coefficient product := mul(120, 5)

After

Higher derivative level1 ORIGINAL power5 coefficient product = 600

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S006

S008 · calculation

Before

Higher derivative level1 ORIGINAL power6 coefficient product := mul(140, 6)

After

Higher derivative level1 ORIGINAL power6 coefficient product = 840

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S007

S009 · implies

Before

previous derivative order=0;actual low-to-high list=[20, 40, 60, 80, 100, 120, 140];drop ONLY its constant term

After

ALL [old_power,old_coefficient,multiplier,new_coefficient] rows=[[1, 40, 1, 40], [2, 60, 2, 120], [3, 80, 3, 240], [4, 100, 4, 400], [5, 120, 5, 600], [6, 140, 6, 840]];next raw list=[40, 120, 240, 400, 600, 840];all intermediate products SAFE

Conditions: none

At each level multiply the original coefficient by its old power k and place it at k−1 in low-to-high order.Once exhausted,the raw list stays empty and is normalized to[0] only at the end.The English source requires every intermediate product SAFE,not merely the final value.

Step identifiers and dependencies

Rule: higher_EVERY_recursive_derivative_level_not_reordered · Uses: G001, S008

S010 · calculation

Before

Higher derivative level2 ORIGINAL power1 coefficient product := mul(120, 1)

After

Higher derivative level2 ORIGINAL power1 coefficient product = 120

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S009

S011 · calculation

Before

Higher derivative level2 ORIGINAL power2 coefficient product := mul(240, 2)

After

Higher derivative level2 ORIGINAL power2 coefficient product = 480

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S010

S012 · calculation

Before

Higher derivative level2 ORIGINAL power3 coefficient product := mul(400, 3)

After

Higher derivative level2 ORIGINAL power3 coefficient product = 1200

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S011

S013 · calculation

Before

Higher derivative level2 ORIGINAL power4 coefficient product := mul(600, 4)

After

Higher derivative level2 ORIGINAL power4 coefficient product = 2400

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S012

S014 · calculation

Before

Higher derivative level2 ORIGINAL power5 coefficient product := mul(840, 5)

After

Higher derivative level2 ORIGINAL power5 coefficient product = 4200

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S013

S015 · implies

Before

previous derivative order=1;actual low-to-high list=[40, 120, 240, 400, 600, 840];drop ONLY its constant term

After

ALL [old_power,old_coefficient,multiplier,new_coefficient] rows=[[1, 120, 1, 120], [2, 240, 2, 480], [3, 400, 3, 1200], [4, 600, 4, 2400], [5, 840, 5, 4200]];next raw list=[120, 480, 1200, 2400, 4200];all intermediate products SAFE

Conditions: none

At each level multiply the original coefficient by its old power k and place it at k−1 in low-to-high order.Once exhausted,the raw list stays empty and is normalized to[0] only at the end.The English source requires every intermediate product SAFE,not merely the final value.

Step identifiers and dependencies

Rule: higher_EVERY_recursive_derivative_level_not_reordered · Uses: G001, S014

S016 · calculation

Before

Higher derivative level3 ORIGINAL power1 coefficient product := mul(480, 1)

After

Higher derivative level3 ORIGINAL power1 coefficient product = 480

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S015

S017 · calculation

Before

Higher derivative level3 ORIGINAL power2 coefficient product := mul(1200, 2)

After

Higher derivative level3 ORIGINAL power2 coefficient product = 2400

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S016

S018 · calculation

Before

Higher derivative level3 ORIGINAL power3 coefficient product := mul(2400, 3)

After

Higher derivative level3 ORIGINAL power3 coefficient product = 7200

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S017

S019 · calculation

Before

Higher derivative level3 ORIGINAL power4 coefficient product := mul(4200, 4)

After

Higher derivative level3 ORIGINAL power4 coefficient product = 16800

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S018

S020 · implies

Before

previous derivative order=2;actual low-to-high list=[120, 480, 1200, 2400, 4200];drop ONLY its constant term

After

ALL [old_power,old_coefficient,multiplier,new_coefficient] rows=[[1, 480, 1, 480], [2, 1200, 2, 2400], [3, 2400, 3, 7200], [4, 4200, 4, 16800]];next raw list=[480, 2400, 7200, 16800];all intermediate products SAFE

Conditions: none

At each level multiply the original coefficient by its old power k and place it at k−1 in low-to-high order.Once exhausted,the raw list stays empty and is normalized to[0] only at the end.The English source requires every intermediate product SAFE,not merely the final value.

Step identifiers and dependencies

Rule: higher_EVERY_recursive_derivative_level_not_reordered · Uses: G001, S019

S021 · implies

Before

ORIGINAL coefficients=[20, 40, 60, 80, 100, 120, 140];order=3;declared degree bound=6

After

final derivative coefficients=[480, 2400, 7200, 16800];for each original power k>=order multiplier=k*(k-1)*...*(k-order+1);lower powers vanish

Conditions: none

Repeated differentiation gives the falling factorial in original coefficient order;orders above the declared bound vanish.This gives no analyticity claim for arbitrary differentiable functions and does not turn a trailing-zero bound into the minimal degree.

Step identifiers and dependencies

Rule: higher_falling_factorial_rule_all_orders_polynomial_only · Uses: G001, S020

Reverse checks

  • S021 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S020 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S019 · premise_and_result_audit — Recompute Higher derivative level3 ORIGINAL power4 coefficient product with exact rational arithmetic, not rounded decimals.
  • S018 · premise_and_result_audit — Recompute Higher derivative level3 ORIGINAL power3 coefficient product with exact rational arithmetic, not rounded decimals.
  • S017 · premise_and_result_audit — Recompute Higher derivative level3 ORIGINAL power2 coefficient product with exact rational arithmetic, not rounded decimals.
  • S016 · premise_and_result_audit — Recompute Higher derivative level3 ORIGINAL power1 coefficient product with exact rational arithmetic, not rounded decimals.
  • S015 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S014 · premise_and_result_audit — Recompute Higher derivative level2 ORIGINAL power5 coefficient product with exact rational arithmetic, not rounded decimals.
  • S013 · premise_and_result_audit — Recompute Higher derivative level2 ORIGINAL power4 coefficient product with exact rational arithmetic, not rounded decimals.
  • S012 · premise_and_result_audit — Recompute Higher derivative level2 ORIGINAL power3 coefficient product with exact rational arithmetic, not rounded decimals.
  • S011 · premise_and_result_audit — Recompute Higher derivative level2 ORIGINAL power2 coefficient product with exact rational arithmetic, not rounded decimals.
  • S010 · premise_and_result_audit — Recompute Higher derivative level2 ORIGINAL power1 coefficient product with exact rational arithmetic, not rounded decimals.
  • S009 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S008 · premise_and_result_audit — Recompute Higher derivative level1 ORIGINAL power6 coefficient product with exact rational arithmetic, not rounded decimals.
  • S007 · premise_and_result_audit — Recompute Higher derivative level1 ORIGINAL power5 coefficient product with exact rational arithmetic, not rounded decimals.
  • S006 · premise_and_result_audit — Recompute Higher derivative level1 ORIGINAL power4 coefficient product with exact rational arithmetic, not rounded decimals.
  • S005 · premise_and_result_audit — Recompute Higher derivative level1 ORIGINAL power3 coefficient product with exact rational arithmetic, not rounded decimals.
  • S004 · premise_and_result_audit — Recompute Higher derivative level1 ORIGINAL power2 coefficient product with exact rational arithmetic, not rounded decimals.
  • S003 · premise_and_result_audit — Recompute Higher derivative level1 ORIGINAL power1 coefficient product with exact rational arithmetic, not rounded decimals.
  • S002 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S001 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.

Result

(6, 3, Yes, recursive_derivative_chain_required, Yes)

The full substitutions and premise checks give the original answer; source identity,format and status are unchanged.

This question review and source binding

Review date: 2026-10-26

Original questions, answers, step expressions, numeric ASTs and historical records are retained. Source candidate labels remain historical and are not overwritten as formal proof.

Source hashes and review receipts
  • input commit: 0f7be61e2c22317a4075561dc822c87d881a50db
  • original question SHA-256: ae86e2b071b4719ebd03615d720c75fc0cbedd16702095ef2016dec0ef01da53
  • candidate record SHA-256: 597cdf5a84029be5559b766bc4c2efd5bd7976ec17efba0a09e7b8e8e6eef381
  • semantic review receipt SHA-256: 357d7ad7a6726b2a757558d3b9586a408ade06526cc023da093719c292704438
  • question-first witness SHA-256: 99cefe17e98c7a74321801cf72df6d02fc95b6a6b78aa335accb7e11ed467b2a
  • Lean: NOT_RUN · human review: NOT_PERFORMED
Same-source full JSON