OCMEBilingual mathematics & derivations繁體中文

Explore related knowledge and questions →

Question 23098: Orders above the Declared Polynomial Degree Bound Give Zero

On this page
  1. Original question and givens
  2. Definition and scope
  3. Step-by-step derivation
  4. Reverse checks
  5. Result
  6. This question review and source binding

Return to catalogue page 116

← Question derivation index · Original question batch

R0045-23098 · q-20261014-advance-20261111-r02-higher-order-derivative-0073

Original question and givens

Use original low-to-high coefficients=[23, 46, 69, 92, 115, 138] for f(t)=sum coefficients[k]*t^k and derivative order=7≥0. f^(0)=f and each further order differentiates the preceding function. The declared degree bound is coefficient-list length minus1; trailing zeros would make it an upper bound rather than a minimal degree. Evaluation point=0. Give (declared_degree_bound, order, derivative_coefficients, point, value, zero_derivative_certificate, certificate).

  • G001 — Use original low-to-high coefficients=[23, 46, 69, 92, 115, 138] for f(t)=sum coefficients[k]*t^k and derivative order=7≥0. f^(0)=f and each further order differentiates the preceding function. The declared degree bound is coefficient-list length minus1; trailing zeros would make it an upper bound rather than a minimal degree. Evaluation point=0. Give (declared_degree_bound, order, derivative_coefficients, point, value, zero_derivative_certificate, certificate).

Definition and scope

Use the original question domain, assumptions and cited MKO definitions. This item has second-context mathematical and bilingual review, with the model, answer and every arithmetic step independently recomputed from the original parameters; the source question remains a candidate.

Step-by-step derivation

S001 · implies

Before

source operation=higher-zero-beyond-degree;original snapshot and mathematics retained

After

explicit ordered source output fields=[declared_degree_bound, order, derivative_coefficients, point, value, zero_derivative_certificate, certificate]

Conditions: none

Retain the historical interface marker while listing source fields without JavaScript.Tags and No retain their claim scope;source-protocol ordering is not a mathematical proof.

Step identifiers and dependencies

Rule: source_ordered_interface_explicit_without_javascript · Uses: G001

S002 · implies

Before

ORIGINAL low-to-high coefficients=[23, 46, 69, 92, 115, 138];declared order=7

After

declared degree BOUND=5=ORIGINAL length-1;initialize derivative order0 with the UNTRIMMED original list

Conditions: none

Length minus1 is the declared bound;do not trim trailing zeros.Order0 is the original function.The monomial rule and finite sums justify each polynomial derivative,not an infinite extrapolation for arbitrary functions.

Step identifiers and dependencies

Rule: higher_ORIGINAL_low_to_high_coefficients_degree_BOUND_order0 · Uses: G001, S001

S003 · calculation

Before

Higher derivative level1 ORIGINAL power1 coefficient product := mul(46, 1)

After

Higher derivative level1 ORIGINAL power1 coefficient product = 46

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S002

S004 · calculation

Before

Higher derivative level1 ORIGINAL power2 coefficient product := mul(69, 2)

After

Higher derivative level1 ORIGINAL power2 coefficient product = 138

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S003

S005 · calculation

Before

Higher derivative level1 ORIGINAL power3 coefficient product := mul(92, 3)

After

Higher derivative level1 ORIGINAL power3 coefficient product = 276

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S004

S006 · calculation

Before

Higher derivative level1 ORIGINAL power4 coefficient product := mul(115, 4)

After

Higher derivative level1 ORIGINAL power4 coefficient product = 460

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S005

S007 · calculation

Before

Higher derivative level1 ORIGINAL power5 coefficient product := mul(138, 5)

After

Higher derivative level1 ORIGINAL power5 coefficient product = 690

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S006

S008 · implies

Before

previous derivative order=0;actual low-to-high list=[23, 46, 69, 92, 115, 138];drop ONLY its constant term

After

ALL [old_power,old_coefficient,multiplier,new_coefficient] rows=[[1, 46, 1, 46], [2, 69, 2, 138], [3, 92, 3, 276], [4, 115, 4, 460], [5, 138, 5, 690]];next raw list=[46, 138, 276, 460, 690];all intermediate products SAFE

Conditions: none

At each level multiply the original coefficient by its old power k and place it at k−1 in low-to-high order.Once exhausted,the raw list stays empty and is normalized to[0] only at the end.The English source requires every intermediate product SAFE,not merely the final value.

Step identifiers and dependencies

Rule: higher_EVERY_recursive_derivative_level_not_reordered · Uses: G001, S007

S009 · calculation

Before

Higher derivative level2 ORIGINAL power1 coefficient product := mul(138, 1)

After

Higher derivative level2 ORIGINAL power1 coefficient product = 138

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S008

S010 · calculation

Before

Higher derivative level2 ORIGINAL power2 coefficient product := mul(276, 2)

After

Higher derivative level2 ORIGINAL power2 coefficient product = 552

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S009

S011 · calculation

Before

Higher derivative level2 ORIGINAL power3 coefficient product := mul(460, 3)

After

Higher derivative level2 ORIGINAL power3 coefficient product = 1380

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S010

S012 · calculation

Before

Higher derivative level2 ORIGINAL power4 coefficient product := mul(690, 4)

After

Higher derivative level2 ORIGINAL power4 coefficient product = 2760

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S011

S013 · implies

Before

previous derivative order=1;actual low-to-high list=[46, 138, 276, 460, 690];drop ONLY its constant term

After

ALL [old_power,old_coefficient,multiplier,new_coefficient] rows=[[1, 138, 1, 138], [2, 276, 2, 552], [3, 460, 3, 1380], [4, 690, 4, 2760]];next raw list=[138, 552, 1380, 2760];all intermediate products SAFE

Conditions: none

At each level multiply the original coefficient by its old power k and place it at k−1 in low-to-high order.Once exhausted,the raw list stays empty and is normalized to[0] only at the end.The English source requires every intermediate product SAFE,not merely the final value.

Step identifiers and dependencies

Rule: higher_EVERY_recursive_derivative_level_not_reordered · Uses: G001, S012

S014 · calculation

Before

Higher derivative level3 ORIGINAL power1 coefficient product := mul(552, 1)

After

Higher derivative level3 ORIGINAL power1 coefficient product = 552

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S013

S015 · calculation

Before

Higher derivative level3 ORIGINAL power2 coefficient product := mul(1380, 2)

After

Higher derivative level3 ORIGINAL power2 coefficient product = 2760

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S014

S016 · calculation

Before

Higher derivative level3 ORIGINAL power3 coefficient product := mul(2760, 3)

After

Higher derivative level3 ORIGINAL power3 coefficient product = 8280

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S015

S017 · implies

Before

previous derivative order=2;actual low-to-high list=[138, 552, 1380, 2760];drop ONLY its constant term

After

ALL [old_power,old_coefficient,multiplier,new_coefficient] rows=[[1, 552, 1, 552], [2, 1380, 2, 2760], [3, 2760, 3, 8280]];next raw list=[552, 2760, 8280];all intermediate products SAFE

Conditions: none

At each level multiply the original coefficient by its old power k and place it at k−1 in low-to-high order.Once exhausted,the raw list stays empty and is normalized to[0] only at the end.The English source requires every intermediate product SAFE,not merely the final value.

Step identifiers and dependencies

Rule: higher_EVERY_recursive_derivative_level_not_reordered · Uses: G001, S016

S018 · calculation

Before

Higher derivative level4 ORIGINAL power1 coefficient product := mul(2760, 1)

After

Higher derivative level4 ORIGINAL power1 coefficient product = 2760

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S017

S019 · calculation

Before

Higher derivative level4 ORIGINAL power2 coefficient product := mul(8280, 2)

After

Higher derivative level4 ORIGINAL power2 coefficient product = 16560

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S018

S020 · implies

Before

previous derivative order=3;actual low-to-high list=[552, 2760, 8280];drop ONLY its constant term

After

ALL [old_power,old_coefficient,multiplier,new_coefficient] rows=[[1, 2760, 1, 2760], [2, 8280, 2, 16560]];next raw list=[2760, 16560];all intermediate products SAFE

Conditions: none

At each level multiply the original coefficient by its old power k and place it at k−1 in low-to-high order.Once exhausted,the raw list stays empty and is normalized to[0] only at the end.The English source requires every intermediate product SAFE,not merely the final value.

Step identifiers and dependencies

Rule: higher_EVERY_recursive_derivative_level_not_reordered · Uses: G001, S019

S021 · calculation

Before

Higher derivative level5 ORIGINAL power1 coefficient product := mul(16560, 1)

After

Higher derivative level5 ORIGINAL power1 coefficient product = 16560

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S020

S022 · implies

Before

previous derivative order=4;actual low-to-high list=[2760, 16560];drop ONLY its constant term

After

ALL [old_power,old_coefficient,multiplier,new_coefficient] rows=[[1, 16560, 1, 16560]];next raw list=[16560];all intermediate products SAFE

Conditions: none

At each level multiply the original coefficient by its old power k and place it at k−1 in low-to-high order.Once exhausted,the raw list stays empty and is normalized to[0] only at the end.The English source requires every intermediate product SAFE,not merely the final value.

Step identifiers and dependencies

Rule: higher_EVERY_recursive_derivative_level_not_reordered · Uses: G001, S021

S023 · implies

Before

previous derivative order=5;actual low-to-high list=[16560];drop ONLY its constant term

After

ALL [old_power,old_coefficient,multiplier,new_coefficient] rows=[];next raw list=[];all intermediate products SAFE

Conditions: none

At each level multiply the original coefficient by its old power k and place it at k−1 in low-to-high order.Once exhausted,the raw list stays empty and is normalized to[0] only at the end.The English source requires every intermediate product SAFE,not merely the final value.

Step identifiers and dependencies

Rule: higher_EVERY_recursive_derivative_level_not_reordered · Uses: G001, S022

S024 · implies

Before

previous derivative order=6;actual low-to-high list=[];drop ONLY its constant term

After

ALL [old_power,old_coefficient,multiplier,new_coefficient] rows=[];next raw list=[];all intermediate products SAFE

Conditions: none

At each level multiply the original coefficient by its old power k and place it at k−1 in low-to-high order.Once exhausted,the raw list stays empty and is normalized to[0] only at the end.The English source requires every intermediate product SAFE,not merely the final value.

Step identifiers and dependencies

Rule: higher_EVERY_recursive_derivative_level_not_reordered · Uses: G001, S023

S025 · implies

Before

ORIGINAL coefficients=[23, 46, 69, 92, 115, 138];order=7;declared degree bound=5

After

final derivative coefficients=[0];for each original power k>=order multiplier=k*(k-1)*...*(k-order+1);lower powers vanish

Conditions: none

Repeated differentiation gives the falling factorial in original coefficient order;orders above the declared bound vanish.This gives no analyticity claim for arbitrary differentiable functions and does not turn a trailing-zero bound into the minimal degree.

Step identifiers and dependencies

Rule: higher_falling_factorial_rule_all_orders_polynomial_only · Uses: G001, S024

S026 · calculation

Before

Higher derivative Horner power0 previous value times ORIGINAL point := mul(0, 0)

After

Higher derivative Horner power0 previous value times ORIGINAL point = 0

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S025

S027 · calculation

Before

Higher derivative Horner power0 plus ORIGINAL derivative coefficient := sum(0, 0)

After

Higher derivative Horner power0 plus ORIGINAL derivative coefficient = 0

Conditions: none

Substitute this question's original roles,order and established intermediates exactly,not floats or another question's data.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S026

Reverse checks

  • S027 · premise_and_result_audit — Recompute Higher derivative Horner power0 plus ORIGINAL derivative coefficient with exact rational arithmetic, not rounded decimals.
  • S026 · premise_and_result_audit — Recompute Higher derivative Horner power0 previous value times ORIGINAL point with exact rational arithmetic, not rounded decimals.
  • S025 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S024 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S023 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S022 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S021 · premise_and_result_audit — Recompute Higher derivative level5 ORIGINAL power1 coefficient product with exact rational arithmetic, not rounded decimals.
  • S020 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S019 · premise_and_result_audit — Recompute Higher derivative level4 ORIGINAL power2 coefficient product with exact rational arithmetic, not rounded decimals.
  • S018 · premise_and_result_audit — Recompute Higher derivative level4 ORIGINAL power1 coefficient product with exact rational arithmetic, not rounded decimals.
  • S017 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S016 · premise_and_result_audit — Recompute Higher derivative level3 ORIGINAL power3 coefficient product with exact rational arithmetic, not rounded decimals.
  • S015 · premise_and_result_audit — Recompute Higher derivative level3 ORIGINAL power2 coefficient product with exact rational arithmetic, not rounded decimals.
  • S014 · premise_and_result_audit — Recompute Higher derivative level3 ORIGINAL power1 coefficient product with exact rational arithmetic, not rounded decimals.
  • S013 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S012 · premise_and_result_audit — Recompute Higher derivative level2 ORIGINAL power4 coefficient product with exact rational arithmetic, not rounded decimals.
  • S011 · premise_and_result_audit — Recompute Higher derivative level2 ORIGINAL power3 coefficient product with exact rational arithmetic, not rounded decimals.
  • S010 · premise_and_result_audit — Recompute Higher derivative level2 ORIGINAL power2 coefficient product with exact rational arithmetic, not rounded decimals.
  • S009 · premise_and_result_audit — Recompute Higher derivative level2 ORIGINAL power1 coefficient product with exact rational arithmetic, not rounded decimals.
  • S008 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S007 · premise_and_result_audit — Recompute Higher derivative level1 ORIGINAL power5 coefficient product with exact rational arithmetic, not rounded decimals.
  • S006 · premise_and_result_audit — Recompute Higher derivative level1 ORIGINAL power4 coefficient product with exact rational arithmetic, not rounded decimals.
  • S005 · premise_and_result_audit — Recompute Higher derivative level1 ORIGINAL power3 coefficient product with exact rational arithmetic, not rounded decimals.
  • S004 · premise_and_result_audit — Recompute Higher derivative level1 ORIGINAL power2 coefficient product with exact rational arithmetic, not rounded decimals.
  • S003 · premise_and_result_audit — Recompute Higher derivative level1 ORIGINAL power1 coefficient product with exact rational arithmetic, not rounded decimals.
  • S002 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
  • S001 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.

Result

(5, 7, [0], 0, 0, Yes, orders_above_polynomial_degree_are_zero_without_analyticity_claim)

The full substitutions and premise checks give the original answer; source identity,format and status are unchanged.

This question review and source binding

Review date: 2026-10-26

Original questions, answers, step expressions, numeric ASTs and historical records are retained. Source candidate labels remain historical and are not overwritten as formal proof.

Source hashes and review receipts
  • input commit: 0f7be61e2c22317a4075561dc822c87d881a50db
  • original question SHA-256: 5f38f4496b97054405eab3db5625ca80601a057663a152c42f5c41c60bfff0df
  • candidate record SHA-256: 5cccad7e6ebba2008a7d91da6f5a23d3b3551742e2d5b9bede1250c0ab5ed369
  • semantic review receipt SHA-256: 357d7ad7a6726b2a757558d3b9586a408ade06526cc023da093719c292704438
  • question-first witness SHA-256: 99cefe17e98c7a74321801cf72df6d02fc95b6a6b78aa335accb7e11ed467b2a
  • Lean: NOT_RUN · human review: NOT_PERFORMED
Same-source full JSON