Question 26459: An Exact Center Jet and Taylor Error Do Not Prove Interval-Wide Hypotheses

Original question and givens

Coefficients=[10, 2, 11, 3, 12] are in ascending power order, with exact rationals and trailing zero coefficients removed for degree. Center=0, point=1/2, order=4; keep terms through that order, and define remainder=f(x)−Taylor_value. Give (coefficients, center, x, order, center_derivatives, Taylor_terms, Taylor_value, function_value, remainder, boundary).

• G001 — Coefficients=[10, 2, 11, 3, 12] are in ascending power order, with exact rationals and trailing zero coefficients removed for degree. Center=0, point=1/2, order=4; keep terms through that order, and define remainder=f(x)−Taylor_value. Give (coefficients, center, x, order, center_derivatives, Taylor_terms, Taylor_value, function_value, remainder, boundary).

Definition and scope

Use the original question domain, assumptions and cited MKO definitions. This item has second-context mathematical and bilingual review, with the model, answer and every arithmetic step independently recomputed from the original parameters; the source question remains a candidate.

• mko-taylor-remainder-theorem

Step-by-step derivation

source roles = [taylor-qualification]

derived = [[coefficients, center, x, order, center_derivatives, Taylor_terms, Taylor_value, function_value, remainder, boundary]]

Taylor ORIGINAL x minus declared center := sub(1/2, 0)

Taylor ORIGINAL x minus declared center = 1/2

(0)^0

Taylor ORIGINAL derivative0 center power0 term0 = 1

Taylor ORIGINAL derivative0 falling factor times power term0 := mul(1, 1)

Taylor ORIGINAL derivative0 falling factor times power term0 = 1

Taylor ORIGINAL derivative0 ORIGINAL coefficient term0 := mul(10, 1)

Taylor ORIGINAL derivative0 ORIGINAL coefficient term0 = 10

Taylor ORIGINAL derivative0 ascending derivative sum term0 := sum(0, 10)

Taylor ORIGINAL derivative0 ascending derivative sum term0 = 10

(0)^1

Taylor ORIGINAL derivative0 center power1 term1 = 0

Taylor ORIGINAL derivative0 falling factor times power term1 := mul(1, 0)

Taylor ORIGINAL derivative0 falling factor times power term1 = 0

Taylor ORIGINAL derivative0 ORIGINAL coefficient term1 := mul(2, 0)

Taylor ORIGINAL derivative0 ORIGINAL coefficient term1 = 0

Taylor ORIGINAL derivative0 ascending derivative sum term1 := sum(10, 0)

Taylor ORIGINAL derivative0 ascending derivative sum term1 = 10

(0)^2

Taylor ORIGINAL derivative0 center power2 term2 = 0

Taylor ORIGINAL derivative0 falling factor times power term2 := mul(1, 0)

Taylor ORIGINAL derivative0 falling factor times power term2 = 0

Taylor ORIGINAL derivative0 ORIGINAL coefficient term2 := mul(11, 0)

Taylor ORIGINAL derivative0 ORIGINAL coefficient term2 = 0

Taylor ORIGINAL derivative0 ascending derivative sum term2 := sum(10, 0)

Taylor ORIGINAL derivative0 ascending derivative sum term2 = 10

(0)^3

Taylor ORIGINAL derivative0 center power3 term3 = 0

Taylor ORIGINAL derivative0 falling factor times power term3 := mul(1, 0)

Taylor ORIGINAL derivative0 falling factor times power term3 = 0

Taylor ORIGINAL derivative0 ORIGINAL coefficient term3 := mul(3, 0)

Taylor ORIGINAL derivative0 ORIGINAL coefficient term3 = 0

Taylor ORIGINAL derivative0 ascending derivative sum term3 := sum(10, 0)

Taylor ORIGINAL derivative0 ascending derivative sum term3 = 10

(0)^4

Taylor ORIGINAL derivative0 center power4 term4 = 0

Taylor ORIGINAL derivative0 falling factor times power term4 := mul(1, 0)

Taylor ORIGINAL derivative0 falling factor times power term4 = 0

Taylor ORIGINAL derivative0 ORIGINAL coefficient term4 := mul(12, 0)

Taylor ORIGINAL derivative0 ORIGINAL coefficient term4 = 0

Taylor ORIGINAL derivative0 ascending derivative sum term4 := sum(10, 0)

Taylor ORIGINAL derivative0 ascending derivative sum term4 = 10

source roles = [0, 0, [10, 2, 11, 3, 12]]

derived = [[[0, 10, 1, 1, 10], [1, 2, 1, 0, 0], [2, 11, 1, 0, 0], [3, 3, 1, 0, 0], [4, 12, 1, 0, 0]], 10]

(1/2)^0

Taylor ORIGINAL displacement power0 = 1

Taylor ORIGINAL derivative times displacement0 := mul(10, 1)

Taylor ORIGINAL derivative times displacement0 = 10

Taylor ORIGINAL term0 divide factorial := div(10, 1)

Taylor ORIGINAL term0 divide factorial = 10

(0)^0

Taylor ORIGINAL derivative1 center power0 term1 = 1

Taylor ORIGINAL derivative1 falling factor times power term1 := mul(1, 1)

Taylor ORIGINAL derivative1 falling factor times power term1 = 1

Taylor ORIGINAL derivative1 ORIGINAL coefficient term1 := mul(2, 1)

Taylor ORIGINAL derivative1 ORIGINAL coefficient term1 = 2

Taylor ORIGINAL derivative1 ascending derivative sum term1 := sum(0, 2)

Taylor ORIGINAL derivative1 ascending derivative sum term1 = 2

(0)^1

Taylor ORIGINAL derivative1 center power1 term2 = 0

Taylor ORIGINAL derivative1 falling factor times power term2 := mul(2, 0)

Taylor ORIGINAL derivative1 falling factor times power term2 = 0

Taylor ORIGINAL derivative1 ORIGINAL coefficient term2 := mul(11, 0)

Taylor ORIGINAL derivative1 ORIGINAL coefficient term2 = 0

Taylor ORIGINAL derivative1 ascending derivative sum term2 := sum(2, 0)

Taylor ORIGINAL derivative1 ascending derivative sum term2 = 2

(0)^2

Taylor ORIGINAL derivative1 center power2 term3 = 0

Taylor ORIGINAL derivative1 falling factor times power term3 := mul(3, 0)

Taylor ORIGINAL derivative1 falling factor times power term3 = 0

Taylor ORIGINAL derivative1 ORIGINAL coefficient term3 := mul(3, 0)

Taylor ORIGINAL derivative1 ORIGINAL coefficient term3 = 0

Taylor ORIGINAL derivative1 ascending derivative sum term3 := sum(2, 0)

Taylor ORIGINAL derivative1 ascending derivative sum term3 = 2

(0)^3

Taylor ORIGINAL derivative1 center power3 term4 = 0

Taylor ORIGINAL derivative1 falling factor times power term4 := mul(4, 0)

Taylor ORIGINAL derivative1 falling factor times power term4 = 0

Taylor ORIGINAL derivative1 ORIGINAL coefficient term4 := mul(12, 0)

Taylor ORIGINAL derivative1 ORIGINAL coefficient term4 = 0

Taylor ORIGINAL derivative1 ascending derivative sum term4 := sum(2, 0)

Taylor ORIGINAL derivative1 ascending derivative sum term4 = 2

source roles = [1, 0, [10, 2, 11, 3, 12]]

derived = [[[1, 2, 1, 1, 2], [2, 11, 2, 0, 0], [3, 3, 3, 0, 0], [4, 12, 4, 0, 0]], 2]

(1/2)^1

Taylor ORIGINAL displacement power1 = 1/2

Taylor ORIGINAL derivative times displacement1 := mul(2, 1/2)

Taylor ORIGINAL derivative times displacement1 = 1

Taylor ORIGINAL term1 divide factorial := div(1, 1)

Taylor ORIGINAL term1 divide factorial = 1

(0)^0

Taylor ORIGINAL derivative2 center power0 term2 = 1

Taylor ORIGINAL derivative2 falling factor times power term2 := mul(2, 1)

Taylor ORIGINAL derivative2 falling factor times power term2 = 2

Taylor ORIGINAL derivative2 ORIGINAL coefficient term2 := mul(11, 2)

Taylor ORIGINAL derivative2 ORIGINAL coefficient term2 = 22

Taylor ORIGINAL derivative2 ascending derivative sum term2 := sum(0, 22)

Taylor ORIGINAL derivative2 ascending derivative sum term2 = 22

(0)^1

Taylor ORIGINAL derivative2 center power1 term3 = 0

Taylor ORIGINAL derivative2 falling factor times power term3 := mul(6, 0)

Taylor ORIGINAL derivative2 falling factor times power term3 = 0

Taylor ORIGINAL derivative2 ORIGINAL coefficient term3 := mul(3, 0)

Taylor ORIGINAL derivative2 ORIGINAL coefficient term3 = 0

Taylor ORIGINAL derivative2 ascending derivative sum term3 := sum(22, 0)

Taylor ORIGINAL derivative2 ascending derivative sum term3 = 22

(0)^2

Taylor ORIGINAL derivative2 center power2 term4 = 0

Taylor ORIGINAL derivative2 falling factor times power term4 := mul(12, 0)

Taylor ORIGINAL derivative2 falling factor times power term4 = 0

Taylor ORIGINAL derivative2 ORIGINAL coefficient term4 := mul(12, 0)

Taylor ORIGINAL derivative2 ORIGINAL coefficient term4 = 0

Taylor ORIGINAL derivative2 ascending derivative sum term4 := sum(22, 0)

Taylor ORIGINAL derivative2 ascending derivative sum term4 = 22

source roles = [2, 0, [10, 2, 11, 3, 12]]

derived = [[[2, 11, 2, 1, 22], [3, 3, 6, 0, 0], [4, 12, 12, 0, 0]], 22]

(1/2)^2

Taylor ORIGINAL displacement power2 = 1/4

Taylor ORIGINAL derivative times displacement2 := mul(22, 1/4)

Taylor ORIGINAL derivative times displacement2 = 11/2

Taylor ORIGINAL term2 divide factorial := div(11/2, 2)

Taylor ORIGINAL term2 divide factorial = 11/4

(0)^0

Taylor ORIGINAL derivative3 center power0 term3 = 1

Taylor ORIGINAL derivative3 falling factor times power term3 := mul(6, 1)

Taylor ORIGINAL derivative3 falling factor times power term3 = 6

Taylor ORIGINAL derivative3 ORIGINAL coefficient term3 := mul(3, 6)

Taylor ORIGINAL derivative3 ORIGINAL coefficient term3 = 18

Taylor ORIGINAL derivative3 ascending derivative sum term3 := sum(0, 18)

Taylor ORIGINAL derivative3 ascending derivative sum term3 = 18

(0)^1

Taylor ORIGINAL derivative3 center power1 term4 = 0

Taylor ORIGINAL derivative3 falling factor times power term4 := mul(24, 0)

Taylor ORIGINAL derivative3 falling factor times power term4 = 0

Taylor ORIGINAL derivative3 ORIGINAL coefficient term4 := mul(12, 0)

Taylor ORIGINAL derivative3 ORIGINAL coefficient term4 = 0

Taylor ORIGINAL derivative3 ascending derivative sum term4 := sum(18, 0)

Taylor ORIGINAL derivative3 ascending derivative sum term4 = 18

source roles = [3, 0, [10, 2, 11, 3, 12]]

derived = [[[3, 3, 6, 1, 18], [4, 12, 24, 0, 0]], 18]

(1/2)^3

Taylor ORIGINAL displacement power3 = 1/8

Taylor ORIGINAL derivative times displacement3 := mul(18, 1/8)

Taylor ORIGINAL derivative times displacement3 = 9/4

Taylor ORIGINAL term3 divide factorial := div(9/4, 6)

Taylor ORIGINAL term3 divide factorial = 3/8

(0)^0

Taylor ORIGINAL derivative4 center power0 term4 = 1

Taylor ORIGINAL derivative4 falling factor times power term4 := mul(24, 1)

Taylor ORIGINAL derivative4 falling factor times power term4 = 24

Taylor ORIGINAL derivative4 ORIGINAL coefficient term4 := mul(12, 24)

Taylor ORIGINAL derivative4 ORIGINAL coefficient term4 = 288

Taylor ORIGINAL derivative4 ascending derivative sum term4 := sum(0, 288)

Taylor ORIGINAL derivative4 ascending derivative sum term4 = 288

source roles = [4, 0, [10, 2, 11, 3, 12]]

derived = [[[4, 12, 24, 1, 288]], 288]

(1/2)^4

Taylor ORIGINAL displacement power4 = 1/16

Taylor ORIGINAL derivative times displacement4 := mul(288, 1/16)

Taylor ORIGINAL derivative times displacement4 = 18

Taylor ORIGINAL term4 divide factorial := div(18, 24)

Taylor ORIGINAL term4 divide factorial = 3/4

Taylor ORIGINAL partial sum0 := sum(0, 10)

Taylor ORIGINAL partial sum0 = 10

Taylor ORIGINAL partial sum1 := sum(10, 1)

Taylor ORIGINAL partial sum1 = 11

Taylor ORIGINAL partial sum2 := sum(11, 11/4)

Taylor ORIGINAL partial sum2 = 55/4

Taylor ORIGINAL partial sum3 := sum(55/4, 3/8)

Taylor ORIGINAL partial sum3 = 113/8

Taylor ORIGINAL partial sum4 := sum(113/8, 3/4)

Taylor ORIGINAL partial sum4 = 119/8

(1/2)^0

Taylor ORIGINAL full function at x ORIGINAL argument power0 = 1

Taylor ORIGINAL full function at x coefficient term0 := mul(10, 1)

Taylor ORIGINAL full function at x coefficient term0 = 10

Taylor ORIGINAL full function at x ascending partial sum0 := sum(0, 10)

Taylor ORIGINAL full function at x ascending partial sum0 = 10

(1/2)^1

Taylor ORIGINAL full function at x ORIGINAL argument power1 = 1/2

Taylor ORIGINAL full function at x coefficient term1 := mul(2, 1/2)

Taylor ORIGINAL full function at x coefficient term1 = 1

Taylor ORIGINAL full function at x ascending partial sum1 := sum(10, 1)

Taylor ORIGINAL full function at x ascending partial sum1 = 11

(1/2)^2

Taylor ORIGINAL full function at x ORIGINAL argument power2 = 1/4

Taylor ORIGINAL full function at x coefficient term2 := mul(11, 1/4)

Taylor ORIGINAL full function at x coefficient term2 = 11/4

Taylor ORIGINAL full function at x ascending partial sum2 := sum(11, 11/4)

Taylor ORIGINAL full function at x ascending partial sum2 = 55/4

(1/2)^3

Taylor ORIGINAL full function at x ORIGINAL argument power3 = 1/8

Taylor ORIGINAL full function at x coefficient term3 := mul(3, 1/8)

Taylor ORIGINAL full function at x coefficient term3 = 3/8

Taylor ORIGINAL full function at x ascending partial sum3 := sum(55/4, 3/8)

Taylor ORIGINAL full function at x ascending partial sum3 = 113/8

(1/2)^4

Taylor ORIGINAL full function at x ORIGINAL argument power4 = 1/16

Taylor ORIGINAL full function at x coefficient term4 := mul(12, 1/16)

Taylor ORIGINAL full function at x coefficient term4 = 3/4

Taylor ORIGINAL full function at x ascending partial sum4 := sum(113/8, 3/4)

Taylor ORIGINAL full function at x ascending partial sum4 = 119/8

Taylor ORIGINAL f(x) minus Taylor value := sub(119/8, 119/8)

Taylor ORIGINAL f(x) minus Taylor value = 0

source roles = [[10, 2, 11, 3, 12], 0, 1/2, 4, [10, 2, 22, 18, 288], [10, 1, 11/4, 3/8, 3/4]]

derived = [119/8, 119/8, 0, 4]

Taylor ORIGINAL next derivative EMPTY derivative sum := sum()

Taylor ORIGINAL next derivative EMPTY derivative sum = 0

source roles = [5, 0, [10, 2, 11, 3, 12]]

derived = [[], 0]

Reverse checks

• S106 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S105 · premise_and_result_audit — Recompute Taylor ORIGINAL next derivative EMPTY derivative sum with exact rational arithmetic, not rounded decimals.
• S104 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S103 · premise_and_result_audit — Recompute Taylor ORIGINAL f(x) minus Taylor value with exact rational arithmetic, not rounded decimals.
• S102 · premise_and_result_audit — Recompute Taylor ORIGINAL full function at x ascending partial sum4 with exact rational arithmetic, not rounded decimals.
• S101 · premise_and_result_audit — Recompute Taylor ORIGINAL full function at x coefficient term4 with exact rational arithmetic, not rounded decimals.
• S100 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S099 · premise_and_result_audit — Recompute Taylor ORIGINAL full function at x ascending partial sum3 with exact rational arithmetic, not rounded decimals.
• S098 · premise_and_result_audit — Recompute Taylor ORIGINAL full function at x coefficient term3 with exact rational arithmetic, not rounded decimals.
• S097 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S096 · premise_and_result_audit — Recompute Taylor ORIGINAL full function at x ascending partial sum2 with exact rational arithmetic, not rounded decimals.
• S095 · premise_and_result_audit — Recompute Taylor ORIGINAL full function at x coefficient term2 with exact rational arithmetic, not rounded decimals.
• S094 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S093 · premise_and_result_audit — Recompute Taylor ORIGINAL full function at x ascending partial sum1 with exact rational arithmetic, not rounded decimals.
• S092 · premise_and_result_audit — Recompute Taylor ORIGINAL full function at x coefficient term1 with exact rational arithmetic, not rounded decimals.
• S091 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S090 · premise_and_result_audit — Recompute Taylor ORIGINAL full function at x ascending partial sum0 with exact rational arithmetic, not rounded decimals.
• S089 · premise_and_result_audit — Recompute Taylor ORIGINAL full function at x coefficient term0 with exact rational arithmetic, not rounded decimals.
• S088 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S087 · premise_and_result_audit — Recompute Taylor ORIGINAL partial sum4 with exact rational arithmetic, not rounded decimals.
• S086 · premise_and_result_audit — Recompute Taylor ORIGINAL partial sum3 with exact rational arithmetic, not rounded decimals.
• S085 · premise_and_result_audit — Recompute Taylor ORIGINAL partial sum2 with exact rational arithmetic, not rounded decimals.
• S084 · premise_and_result_audit — Recompute Taylor ORIGINAL partial sum1 with exact rational arithmetic, not rounded decimals.
• S083 · premise_and_result_audit — Recompute Taylor ORIGINAL partial sum0 with exact rational arithmetic, not rounded decimals.
• S082 · premise_and_result_audit — Recompute Taylor ORIGINAL term4 divide factorial with exact rational arithmetic, not rounded decimals.
• S081 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative times displacement4 with exact rational arithmetic, not rounded decimals.
• S080 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S079 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S078 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative4 ascending derivative sum term4 with exact rational arithmetic, not rounded decimals.
• S077 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative4 ORIGINAL coefficient term4 with exact rational arithmetic, not rounded decimals.
• S076 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative4 falling factor times power term4 with exact rational arithmetic, not rounded decimals.
• S075 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S074 · premise_and_result_audit — Recompute Taylor ORIGINAL term3 divide factorial with exact rational arithmetic, not rounded decimals.
• S073 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative times displacement3 with exact rational arithmetic, not rounded decimals.
• S072 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S071 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S070 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative3 ascending derivative sum term4 with exact rational arithmetic, not rounded decimals.
• S069 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative3 ORIGINAL coefficient term4 with exact rational arithmetic, not rounded decimals.
• S068 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative3 falling factor times power term4 with exact rational arithmetic, not rounded decimals.
• S067 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S066 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative3 ascending derivative sum term3 with exact rational arithmetic, not rounded decimals.
• S065 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative3 ORIGINAL coefficient term3 with exact rational arithmetic, not rounded decimals.
• S064 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative3 falling factor times power term3 with exact rational arithmetic, not rounded decimals.
• S063 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S062 · premise_and_result_audit — Recompute Taylor ORIGINAL term2 divide factorial with exact rational arithmetic, not rounded decimals.
• S061 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative times displacement2 with exact rational arithmetic, not rounded decimals.
• S060 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S059 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S058 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative2 ascending derivative sum term4 with exact rational arithmetic, not rounded decimals.
• S057 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative2 ORIGINAL coefficient term4 with exact rational arithmetic, not rounded decimals.
• S056 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative2 falling factor times power term4 with exact rational arithmetic, not rounded decimals.
• S055 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S054 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative2 ascending derivative sum term3 with exact rational arithmetic, not rounded decimals.
• S053 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative2 ORIGINAL coefficient term3 with exact rational arithmetic, not rounded decimals.
• S052 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative2 falling factor times power term3 with exact rational arithmetic, not rounded decimals.
• S051 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S050 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative2 ascending derivative sum term2 with exact rational arithmetic, not rounded decimals.
• S049 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative2 ORIGINAL coefficient term2 with exact rational arithmetic, not rounded decimals.
• S048 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative2 falling factor times power term2 with exact rational arithmetic, not rounded decimals.
• S047 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S046 · premise_and_result_audit — Recompute Taylor ORIGINAL term1 divide factorial with exact rational arithmetic, not rounded decimals.
• S045 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative times displacement1 with exact rational arithmetic, not rounded decimals.
• S044 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S043 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S042 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative1 ascending derivative sum term4 with exact rational arithmetic, not rounded decimals.
• S041 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative1 ORIGINAL coefficient term4 with exact rational arithmetic, not rounded decimals.
• S040 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative1 falling factor times power term4 with exact rational arithmetic, not rounded decimals.
• S039 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S038 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative1 ascending derivative sum term3 with exact rational arithmetic, not rounded decimals.
• S037 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative1 ORIGINAL coefficient term3 with exact rational arithmetic, not rounded decimals.
• S036 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative1 falling factor times power term3 with exact rational arithmetic, not rounded decimals.
• S035 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S034 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative1 ascending derivative sum term2 with exact rational arithmetic, not rounded decimals.
• S033 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative1 ORIGINAL coefficient term2 with exact rational arithmetic, not rounded decimals.
• S032 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative1 falling factor times power term2 with exact rational arithmetic, not rounded decimals.
• S031 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S030 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative1 ascending derivative sum term1 with exact rational arithmetic, not rounded decimals.
• S029 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative1 ORIGINAL coefficient term1 with exact rational arithmetic, not rounded decimals.
• S028 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative1 falling factor times power term1 with exact rational arithmetic, not rounded decimals.
• S027 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S026 · premise_and_result_audit — Recompute Taylor ORIGINAL term0 divide factorial with exact rational arithmetic, not rounded decimals.
• S025 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative times displacement0 with exact rational arithmetic, not rounded decimals.
• S024 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S023 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S022 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative0 ascending derivative sum term4 with exact rational arithmetic, not rounded decimals.
• S021 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative0 ORIGINAL coefficient term4 with exact rational arithmetic, not rounded decimals.
• S020 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative0 falling factor times power term4 with exact rational arithmetic, not rounded decimals.
• S019 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S018 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative0 ascending derivative sum term3 with exact rational arithmetic, not rounded decimals.
• S017 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative0 ORIGINAL coefficient term3 with exact rational arithmetic, not rounded decimals.
• S016 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative0 falling factor times power term3 with exact rational arithmetic, not rounded decimals.
• S015 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S014 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative0 ascending derivative sum term2 with exact rational arithmetic, not rounded decimals.
• S013 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative0 ORIGINAL coefficient term2 with exact rational arithmetic, not rounded decimals.
• S012 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative0 falling factor times power term2 with exact rational arithmetic, not rounded decimals.
• S011 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S010 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative0 ascending derivative sum term1 with exact rational arithmetic, not rounded decimals.
• S009 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative0 ORIGINAL coefficient term1 with exact rational arithmetic, not rounded decimals.
• S008 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative0 falling factor times power term1 with exact rational arithmetic, not rounded decimals.
• S007 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S006 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative0 ascending derivative sum term0 with exact rational arithmetic, not rounded decimals.
• S005 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative0 ORIGINAL coefficient term0 with exact rational arithmetic, not rounded decimals.
• S004 · premise_and_result_audit — Recompute Taylor ORIGINAL derivative0 falling factor times power term0 with exact rational arithmetic, not rounded decimals.
• S003 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
• S002 · premise_and_result_audit — Recompute Taylor ORIGINAL x minus declared center with exact rational arithmetic, not rounded decimals.
• S001 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.

Result

([10, 2, 11, 3, 12], 0, 1/2, 4, [10, 2, 22, 18, 288, 0], [10, 1, 11/4, 3/8, 3/4], 119/8, 119/8, 0, interval_wide_n_plus_one_differentiability_is_separate_from_center_jet)

The full substitutions and premise checks give the original answer; source identity,format and status are unchanged.

This question review and source binding

Review date: 2026-10-26

Original questions, answers, step expressions, numeric ASTs and historical records are retained. Source candidate labels remain historical and are not overwritten as formal proof.