# 第 2556 題：有限軌道與週期

[返回所在分頁 13](https://ocme.evemisslab.com/zh-Hant/questions/page/13/)

[← 逐題詳解目錄](https://ocme.evemisslab.com/zh-Hant/questions/) · [原題批次](https://ocme.evemisslab.com/zh-Hant/practice/batch-20261013-advance-20261021-r03-orbit-fixed-periodic-foundations/#q-20261013-advance-20261021-r03-orbit-fixed-periodic-0081)

本頁是已完成第二對話 AI 數理與中英語義覆核的教學詳解，只支持本題明示的模型與前提。沒有人工審查或新 Lean 證明，也不提升原題或 MKO 的 Canonical 真值狀態。

R0004-02556 · q-20261013-advance-20261021-r03-orbit-fixed-periodic-0081



## 原題與已知條件

完整有限狀態自映射。操作=orbit-periodic-inventory；資料={"modulus":10,"a":2,"b":-3,"period_bound":6}。請依 [modulus,a,b,period_bound,point_period_rows,selected_points] 欄序回答。


- G001 — 完整有限狀態自映射。操作=orbit-periodic-inventory；資料={"modulus":10,"a":2,"b":-3,"period_bound":6}。請依 [modulus,a,b,period_bound,point_period_rows,selected_points] 欄序回答。





## 定義與適用範圍

沿用原題明示的論域、假設與來源 MKO 定義。本題已完成第二對話數理與中英語義覆核，並由原始參數逐題獨立重算模型、答案與每個算術步驟；原題仍為 candidate。


- [mko-orbit-fixed-periodic](https://ocme.evemisslab.com/zh-Hant/mko/mko-orbit-fixed-periodic/)





## 逐步推導

S001 · implies操作前

n=10; a=2; b=-3

操作後

S={0,...,9}; T(z)=(a·z+b) mod n

條件：無

餘數取0到n−1，故每個狀態都有唯一後繼且仍在同一有限集合；負數輸入也不取負餘數。

步驟識別與依賴規則：finite_self_map · 依賴：G001





S002 · implies操作前

start=0

操作後

record each state before its first successor calculation

條件：無

從指定點本身開始，不把第一次更新值誤記為初始狀態。

步驟識別與依賴規則：orbit_initial_state · 依賴：G001, S001





S003 · calculation操作前

point0 step1 product := mul(2, 0)

操作後

point0 step1 product = 0

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S002





S004 · calculation操作前

point0 step1 affine value := sum(0, -3)

操作後

point0 step1 affine value = -3

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S003





S005 · implies操作前

Euclidean division of -3 by 10

操作後

-3=-1·10+7

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S004





S006 · calculation操作前

point0 step2 product := mul(2, 7)

操作後

point0 step2 product = 14

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S005





S007 · calculation操作前

point0 step2 affine value := sum(14, -3)

操作後

point0 step2 affine value = 11

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S006





S008 · implies操作前

Euclidean division of 11 by 10

操作後

11=1·10+1

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S007





S009 · calculation操作前

point0 step3 product := mul(2, 1)

操作後

point0 step3 product = 2

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S008





S010 · calculation操作前

point0 step3 affine value := sum(2, -3)

操作後

point0 step3 affine value = -1

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S009





S011 · implies操作前

Euclidean division of -1 by 10

操作後

-1=-1·10+9

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S010





S012 · calculation操作前

point0 step4 product := mul(2, 9)

操作後

point0 step4 product = 18

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S011





S013 · calculation操作前

point0 step4 affine value := sum(18, -3)

操作後

point0 step4 affine value = 15

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S012





S014 · implies操作前

Euclidean division of 15 by 10

操作後

15=1·10+5

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S013





S015 · calculation操作前

point0 step5 product := mul(2, 5)

操作後

point0 step5 product = 10

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S014





S016 · calculation操作前

point0 step5 affine value := sum(10, -3)

操作後

point0 step5 affine value = 7

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S015





S017 · implies操作前

Euclidean division of 7 by 10

操作後

7=0·10+7

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S016





S018 · implies操作前

distinct trace=[0, 7, 1, 9, 5]; first repeated state=7

操作後

cycle_start=1; starting-point least period=null

條件：無

首個重複值定位循環入口。若入口是初始點，重複前各點互異，故首次回返長度就是最小正週期；若入口較晚，初始點不在循環，永不回返。

步驟識別與依賴規則：finite_orbit_certificate · 依賴：G001, S017





S019 · implies操作前

start=1

操作後

record each state before its first successor calculation

條件：無

從指定點本身開始，不把第一次更新值誤記為初始狀態。

步驟識別與依賴規則：orbit_initial_state · 依賴：G001, S018





S020 · calculation操作前

point1 step1 product := mul(2, 1)

操作後

point1 step1 product = 2

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S019





S021 · calculation操作前

point1 step1 affine value := sum(2, -3)

操作後

point1 step1 affine value = -1

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S020





S022 · implies操作前

Euclidean division of -1 by 10

操作後

-1=-1·10+9

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S021





S023 · calculation操作前

point1 step2 product := mul(2, 9)

操作後

point1 step2 product = 18

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S022





S024 · calculation操作前

point1 step2 affine value := sum(18, -3)

操作後

point1 step2 affine value = 15

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S023





S025 · implies操作前

Euclidean division of 15 by 10

操作後

15=1·10+5

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S024





S026 · calculation操作前

point1 step3 product := mul(2, 5)

操作後

point1 step3 product = 10

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S025





S027 · calculation操作前

point1 step3 affine value := sum(10, -3)

操作後

point1 step3 affine value = 7

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S026





S028 · implies操作前

Euclidean division of 7 by 10

操作後

7=0·10+7

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S027





S029 · calculation操作前

point1 step4 product := mul(2, 7)

操作後

point1 step4 product = 14

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S028





S030 · calculation操作前

point1 step4 affine value := sum(14, -3)

操作後

point1 step4 affine value = 11

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S029





S031 · implies操作前

Euclidean division of 11 by 10

操作後

11=1·10+1

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S030





S032 · implies操作前

distinct trace=[1, 9, 5, 7]; first repeated state=1

操作後

cycle_start=0; starting-point least period=4

條件：無

首個重複值定位循環入口。若入口是初始點，重複前各點互異，故首次回返長度就是最小正週期；若入口較晚，初始點不在循環，永不回返。

步驟識別與依賴規則：finite_orbit_certificate · 依賴：G001, S031





S033 · implies操作前

start=2

操作後

record each state before its first successor calculation

條件：無

從指定點本身開始，不把第一次更新值誤記為初始狀態。

步驟識別與依賴規則：orbit_initial_state · 依賴：G001, S032





S034 · calculation操作前

point2 step1 product := mul(2, 2)

操作後

point2 step1 product = 4

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S033





S035 · calculation操作前

point2 step1 affine value := sum(4, -3)

操作後

point2 step1 affine value = 1

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S034





S036 · implies操作前

Euclidean division of 1 by 10

操作後

1=0·10+1

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S035





S037 · calculation操作前

point2 step2 product := mul(2, 1)

操作後

point2 step2 product = 2

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S036





S038 · calculation操作前

point2 step2 affine value := sum(2, -3)

操作後

point2 step2 affine value = -1

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S037





S039 · implies操作前

Euclidean division of -1 by 10

操作後

-1=-1·10+9

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S038





S040 · calculation操作前

point2 step3 product := mul(2, 9)

操作後

point2 step3 product = 18

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S039





S041 · calculation操作前

point2 step3 affine value := sum(18, -3)

操作後

point2 step3 affine value = 15

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S040





S042 · implies操作前

Euclidean division of 15 by 10

操作後

15=1·10+5

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S041





S043 · calculation操作前

point2 step4 product := mul(2, 5)

操作後

point2 step4 product = 10

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S042





S044 · calculation操作前

point2 step4 affine value := sum(10, -3)

操作後

point2 step4 affine value = 7

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S043





S045 · implies操作前

Euclidean division of 7 by 10

操作後

7=0·10+7

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S044





S046 · calculation操作前

point2 step5 product := mul(2, 7)

操作後

point2 step5 product = 14

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S045





S047 · calculation操作前

point2 step5 affine value := sum(14, -3)

操作後

point2 step5 affine value = 11

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S046





S048 · implies操作前

Euclidean division of 11 by 10

操作後

11=1·10+1

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S047





S049 · implies操作前

distinct trace=[2, 1, 9, 5, 7]; first repeated state=1

操作後

cycle_start=1; starting-point least period=null

條件：無

首個重複值定位循環入口。若入口是初始點，重複前各點互異，故首次回返長度就是最小正週期；若入口較晚，初始點不在循環，永不回返。

步驟識別與依賴規則：finite_orbit_certificate · 依賴：G001, S048





S050 · implies操作前

start=3

操作後

record each state before its first successor calculation

條件：無

從指定點本身開始，不把第一次更新值誤記為初始狀態。

步驟識別與依賴規則：orbit_initial_state · 依賴：G001, S049





S051 · calculation操作前

point3 step1 product := mul(2, 3)

操作後

point3 step1 product = 6

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S050





S052 · calculation操作前

point3 step1 affine value := sum(6, -3)

操作後

point3 step1 affine value = 3

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S051





S053 · implies操作前

Euclidean division of 3 by 10

操作後

3=0·10+3

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S052





S054 · implies操作前

distinct trace=[3]; first repeated state=3

操作後

cycle_start=0; starting-point least period=1

條件：無

首個重複值定位循環入口。若入口是初始點，重複前各點互異，故首次回返長度就是最小正週期；若入口較晚，初始點不在循環，永不回返。

步驟識別與依賴規則：finite_orbit_certificate · 依賴：G001, S053





S055 · implies操作前

start=4

操作後

record each state before its first successor calculation

條件：無

從指定點本身開始，不把第一次更新值誤記為初始狀態。

步驟識別與依賴規則：orbit_initial_state · 依賴：G001, S054





S056 · calculation操作前

point4 step1 product := mul(2, 4)

操作後

point4 step1 product = 8

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S055





S057 · calculation操作前

point4 step1 affine value := sum(8, -3)

操作後

point4 step1 affine value = 5

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S056





S058 · implies操作前

Euclidean division of 5 by 10

操作後

5=0·10+5

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S057





S059 · calculation操作前

point4 step2 product := mul(2, 5)

操作後

point4 step2 product = 10

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S058





S060 · calculation操作前

point4 step2 affine value := sum(10, -3)

操作後

point4 step2 affine value = 7

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S059





S061 · implies操作前

Euclidean division of 7 by 10

操作後

7=0·10+7

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S060





S062 · calculation操作前

point4 step3 product := mul(2, 7)

操作後

point4 step3 product = 14

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S061





S063 · calculation操作前

point4 step3 affine value := sum(14, -3)

操作後

point4 step3 affine value = 11

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S062





S064 · implies操作前

Euclidean division of 11 by 10

操作後

11=1·10+1

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S063





S065 · calculation操作前

point4 step4 product := mul(2, 1)

操作後

point4 step4 product = 2

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S064





S066 · calculation操作前

point4 step4 affine value := sum(2, -3)

操作後

point4 step4 affine value = -1

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S065





S067 · implies操作前

Euclidean division of -1 by 10

操作後

-1=-1·10+9

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S066





S068 · calculation操作前

point4 step5 product := mul(2, 9)

操作後

point4 step5 product = 18

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S067





S069 · calculation操作前

point4 step5 affine value := sum(18, -3)

操作後

point4 step5 affine value = 15

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S068





S070 · implies操作前

Euclidean division of 15 by 10

操作後

15=1·10+5

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S069





S071 · implies操作前

distinct trace=[4, 5, 7, 1, 9]; first repeated state=5

操作後

cycle_start=1; starting-point least period=null

條件：無

首個重複值定位循環入口。若入口是初始點，重複前各點互異，故首次回返長度就是最小正週期；若入口較晚，初始點不在循環，永不回返。

步驟識別與依賴規則：finite_orbit_certificate · 依賴：G001, S070





S072 · implies操作前

start=5

操作後

record each state before its first successor calculation

條件：無

從指定點本身開始，不把第一次更新值誤記為初始狀態。

步驟識別與依賴規則：orbit_initial_state · 依賴：G001, S071





S073 · calculation操作前

point5 step1 product := mul(2, 5)

操作後

point5 step1 product = 10

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S072





S074 · calculation操作前

point5 step1 affine value := sum(10, -3)

操作後

point5 step1 affine value = 7

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S073





S075 · implies操作前

Euclidean division of 7 by 10

操作後

7=0·10+7

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S074





S076 · calculation操作前

point5 step2 product := mul(2, 7)

操作後

point5 step2 product = 14

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S075





S077 · calculation操作前

point5 step2 affine value := sum(14, -3)

操作後

point5 step2 affine value = 11

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S076





S078 · implies操作前

Euclidean division of 11 by 10

操作後

11=1·10+1

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S077





S079 · calculation操作前

point5 step3 product := mul(2, 1)

操作後

point5 step3 product = 2

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S078





S080 · calculation操作前

point5 step3 affine value := sum(2, -3)

操作後

point5 step3 affine value = -1

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S079





S081 · implies操作前

Euclidean division of -1 by 10

操作後

-1=-1·10+9

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S080





S082 · calculation操作前

point5 step4 product := mul(2, 9)

操作後

point5 step4 product = 18

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S081





S083 · calculation操作前

point5 step4 affine value := sum(18, -3)

操作後

point5 step4 affine value = 15

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S082





S084 · implies操作前

Euclidean division of 15 by 10

操作後

15=1·10+5

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S083





S085 · implies操作前

distinct trace=[5, 7, 1, 9]; first repeated state=5

操作後

cycle_start=0; starting-point least period=4

條件：無

首個重複值定位循環入口。若入口是初始點，重複前各點互異，故首次回返長度就是最小正週期；若入口較晚，初始點不在循環，永不回返。

步驟識別與依賴規則：finite_orbit_certificate · 依賴：G001, S084





S086 · implies操作前

start=6

操作後

record each state before its first successor calculation

條件：無

從指定點本身開始，不把第一次更新值誤記為初始狀態。

步驟識別與依賴規則：orbit_initial_state · 依賴：G001, S085





S087 · calculation操作前

point6 step1 product := mul(2, 6)

操作後

point6 step1 product = 12

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S086





S088 · calculation操作前

point6 step1 affine value := sum(12, -3)

操作後

point6 step1 affine value = 9

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S087





S089 · implies操作前

Euclidean division of 9 by 10

操作後

9=0·10+9

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S088





S090 · calculation操作前

point6 step2 product := mul(2, 9)

操作後

point6 step2 product = 18

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S089





S091 · calculation操作前

point6 step2 affine value := sum(18, -3)

操作後

point6 step2 affine value = 15

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S090





S092 · implies操作前

Euclidean division of 15 by 10

操作後

15=1·10+5

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S091





S093 · calculation操作前

point6 step3 product := mul(2, 5)

操作後

point6 step3 product = 10

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S092





S094 · calculation操作前

point6 step3 affine value := sum(10, -3)

操作後

point6 step3 affine value = 7

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S093





S095 · implies操作前

Euclidean division of 7 by 10

操作後

7=0·10+7

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S094





S096 · calculation操作前

point6 step4 product := mul(2, 7)

操作後

point6 step4 product = 14

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S095





S097 · calculation操作前

point6 step4 affine value := sum(14, -3)

操作後

point6 step4 affine value = 11

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S096





S098 · implies操作前

Euclidean division of 11 by 10

操作後

11=1·10+1

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S097





S099 · calculation操作前

point6 step5 product := mul(2, 1)

操作後

point6 step5 product = 2

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S098





S100 · calculation操作前

point6 step5 affine value := sum(2, -3)

操作後

point6 step5 affine value = -1

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S099





S101 · implies操作前

Euclidean division of -1 by 10

操作後

-1=-1·10+9

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S100





S102 · implies操作前

distinct trace=[6, 9, 5, 7, 1]; first repeated state=9

操作後

cycle_start=1; starting-point least period=null

條件：無

首個重複值定位循環入口。若入口是初始點，重複前各點互異，故首次回返長度就是最小正週期；若入口較晚，初始點不在循環，永不回返。

步驟識別與依賴規則：finite_orbit_certificate · 依賴：G001, S101





S103 · implies操作前

start=7

操作後

record each state before its first successor calculation

條件：無

從指定點本身開始，不把第一次更新值誤記為初始狀態。

步驟識別與依賴規則：orbit_initial_state · 依賴：G001, S102





S104 · calculation操作前

point7 step1 product := mul(2, 7)

操作後

point7 step1 product = 14

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S103





S105 · calculation操作前

point7 step1 affine value := sum(14, -3)

操作後

point7 step1 affine value = 11

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S104





S106 · implies操作前

Euclidean division of 11 by 10

操作後

11=1·10+1

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S105





S107 · calculation操作前

point7 step2 product := mul(2, 1)

操作後

point7 step2 product = 2

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S106





S108 · calculation操作前

point7 step2 affine value := sum(2, -3)

操作後

point7 step2 affine value = -1

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S107





S109 · implies操作前

Euclidean division of -1 by 10

操作後

-1=-1·10+9

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S108





S110 · calculation操作前

point7 step3 product := mul(2, 9)

操作後

point7 step3 product = 18

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S109





S111 · calculation操作前

point7 step3 affine value := sum(18, -3)

操作後

point7 step3 affine value = 15

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S110





S112 · implies操作前

Euclidean division of 15 by 10

操作後

15=1·10+5

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S111





S113 · calculation操作前

point7 step4 product := mul(2, 5)

操作後

point7 step4 product = 10

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S112





S114 · calculation操作前

point7 step4 affine value := sum(10, -3)

操作後

point7 step4 affine value = 7

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S113





S115 · implies操作前

Euclidean division of 7 by 10

操作後

7=0·10+7

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S114





S116 · implies操作前

distinct trace=[7, 1, 9, 5]; first repeated state=7

操作後

cycle_start=0; starting-point least period=4

條件：無

首個重複值定位循環入口。若入口是初始點，重複前各點互異，故首次回返長度就是最小正週期；若入口較晚，初始點不在循環，永不回返。

步驟識別與依賴規則：finite_orbit_certificate · 依賴：G001, S115





S117 · implies操作前

start=8

操作後

record each state before its first successor calculation

條件：無

從指定點本身開始，不把第一次更新值誤記為初始狀態。

步驟識別與依賴規則：orbit_initial_state · 依賴：G001, S116





S118 · calculation操作前

point8 step1 product := mul(2, 8)

操作後

point8 step1 product = 16

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S117





S119 · calculation操作前

point8 step1 affine value := sum(16, -3)

操作後

point8 step1 affine value = 13

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S118





S120 · implies操作前

Euclidean division of 13 by 10

操作後

13=1·10+3

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S119





S121 · calculation操作前

point8 step2 product := mul(2, 3)

操作後

point8 step2 product = 6

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S120





S122 · calculation操作前

point8 step2 affine value := sum(6, -3)

操作後

point8 step2 affine value = 3

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S121





S123 · implies操作前

Euclidean division of 3 by 10

操作後

3=0·10+3

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S122





S124 · implies操作前

distinct trace=[8, 3]; first repeated state=3

操作後

cycle_start=1; starting-point least period=null

條件：無

首個重複值定位循環入口。若入口是初始點，重複前各點互異，故首次回返長度就是最小正週期；若入口較晚，初始點不在循環，永不回返。

步驟識別與依賴規則：finite_orbit_certificate · 依賴：G001, S123





S125 · implies操作前

start=9

操作後

record each state before its first successor calculation

條件：無

從指定點本身開始，不把第一次更新值誤記為初始狀態。

步驟識別與依賴規則：orbit_initial_state · 依賴：G001, S124





S126 · calculation操作前

point9 step1 product := mul(2, 9)

操作後

point9 step1 product = 18

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S125





S127 · calculation操作前

point9 step1 affine value := sum(18, -3)

操作後

point9 step1 affine value = 15

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S126





S128 · implies操作前

Euclidean division of 15 by 10

操作後

15=1·10+5

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S127





S129 · calculation操作前

point9 step2 product := mul(2, 5)

操作後

point9 step2 product = 10

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S128





S130 · calculation操作前

point9 step2 affine value := sum(10, -3)

操作後

point9 step2 affine value = 7

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S129





S131 · implies操作前

Euclidean division of 7 by 10

操作後

7=0·10+7

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S130





S132 · calculation操作前

point9 step3 product := mul(2, 7)

操作後

point9 step3 product = 14

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S131





S133 · calculation操作前

point9 step3 affine value := sum(14, -3)

操作後

point9 step3 affine value = 11

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S132





S134 · implies操作前

Euclidean division of 11 by 10

操作後

11=1·10+1

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S133





S135 · calculation操作前

point9 step4 product := mul(2, 1)

操作後

point9 step4 product = 2

條件：無

先將目前狀態乘以原始係數a，保留其正負號。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S134





S136 · calculation操作前

point9 step4 affine value := sum(2, -3)

操作後

point9 step4 affine value = -1

條件：無

再加上原始常數b，尚未把此整數當成狀態。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S135





S137 · implies操作前

Euclidean division of -1 by 10

操作後

-1=-1·10+9

條件：無

用整除商與非負餘數驗算轉移；n>0且0≤餘數<n，故餘數唯一。

步驟識別與依賴規則：orbit_successor · 依賴：G001, S136





S138 · implies操作前

distinct trace=[9, 5, 7, 1]; first repeated state=9

操作後

cycle_start=0; starting-point least period=4

條件：無

首個重複值定位循環入口。若入口是初始點，重複前各點互異，故首次回返長度就是最小正週期；若入口較晚，初始點不在循環，永不回返。

步驟識別與依賴規則：finite_orbit_certificate · 依賴：G001, S137





S139 · implies操作前

[[0, 非週期點], [1, 4], [2, 非週期點], [3, 1], [4, 非週期點], [5, 4], [6, 非週期點], [7, 4], [8, 非週期點], [9, 4]]

操作後

least positive period≤6: [1, 3, 5, 7, 9]

條件：無

逐一涵蓋所有n個狀態，只選真正週期點且最小週期不超過界限者；不選最終進入循環的前置點。

步驟識別與依賴規則：least_period_bound_filter · 依賴：G001, S138









## 逐步反向核對


- S139 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S138 · premise_and_result_audit — 依固定自映射重播循環；只對這個完整有限模型推出回返或不回返，不延伸到未給定的系統。
- S137 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S136 · premise_and_result_audit — 以精確有理數重算 point9 step4 affine value，不以小數近似替代。
- S135 · premise_and_result_audit — 以精確有理數重算 point9 step4 product，不以小數近似替代。
- S134 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S133 · premise_and_result_audit — 以精確有理數重算 point9 step3 affine value，不以小數近似替代。
- S132 · premise_and_result_audit — 以精確有理數重算 point9 step3 product，不以小數近似替代。
- S131 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S130 · premise_and_result_audit — 以精確有理數重算 point9 step2 affine value，不以小數近似替代。
- S129 · premise_and_result_audit — 以精確有理數重算 point9 step2 product，不以小數近似替代。
- S128 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S127 · premise_and_result_audit — 以精確有理數重算 point9 step1 affine value，不以小數近似替代。
- S126 · premise_and_result_audit — 以精確有理數重算 point9 step1 product，不以小數近似替代。
- S125 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S124 · premise_and_result_audit — 依固定自映射重播循環；只對這個完整有限模型推出回返或不回返，不延伸到未給定的系統。
- S123 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S122 · premise_and_result_audit — 以精確有理數重算 point8 step2 affine value，不以小數近似替代。
- S121 · premise_and_result_audit — 以精確有理數重算 point8 step2 product，不以小數近似替代。
- S120 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S119 · premise_and_result_audit — 以精確有理數重算 point8 step1 affine value，不以小數近似替代。
- S118 · premise_and_result_audit — 以精確有理數重算 point8 step1 product，不以小數近似替代。
- S117 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S116 · premise_and_result_audit — 依固定自映射重播循環；只對這個完整有限模型推出回返或不回返，不延伸到未給定的系統。
- S115 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S114 · premise_and_result_audit — 以精確有理數重算 point7 step4 affine value，不以小數近似替代。
- S113 · premise_and_result_audit — 以精確有理數重算 point7 step4 product，不以小數近似替代。
- S112 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S111 · premise_and_result_audit — 以精確有理數重算 point7 step3 affine value，不以小數近似替代。
- S110 · premise_and_result_audit — 以精確有理數重算 point7 step3 product，不以小數近似替代。
- S109 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S108 · premise_and_result_audit — 以精確有理數重算 point7 step2 affine value，不以小數近似替代。
- S107 · premise_and_result_audit — 以精確有理數重算 point7 step2 product，不以小數近似替代。
- S106 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S105 · premise_and_result_audit — 以精確有理數重算 point7 step1 affine value，不以小數近似替代。
- S104 · premise_and_result_audit — 以精確有理數重算 point7 step1 product，不以小數近似替代。
- S103 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S102 · premise_and_result_audit — 依固定自映射重播循環；只對這個完整有限模型推出回返或不回返，不延伸到未給定的系統。
- S101 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S100 · premise_and_result_audit — 以精確有理數重算 point6 step5 affine value，不以小數近似替代。
- S099 · premise_and_result_audit — 以精確有理數重算 point6 step5 product，不以小數近似替代。
- S098 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S097 · premise_and_result_audit — 以精確有理數重算 point6 step4 affine value，不以小數近似替代。
- S096 · premise_and_result_audit — 以精確有理數重算 point6 step4 product，不以小數近似替代。
- S095 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S094 · premise_and_result_audit — 以精確有理數重算 point6 step3 affine value，不以小數近似替代。
- S093 · premise_and_result_audit — 以精確有理數重算 point6 step3 product，不以小數近似替代。
- S092 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S091 · premise_and_result_audit — 以精確有理數重算 point6 step2 affine value，不以小數近似替代。
- S090 · premise_and_result_audit — 以精確有理數重算 point6 step2 product，不以小數近似替代。
- S089 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S088 · premise_and_result_audit — 以精確有理數重算 point6 step1 affine value，不以小數近似替代。
- S087 · premise_and_result_audit — 以精確有理數重算 point6 step1 product，不以小數近似替代。
- S086 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S085 · premise_and_result_audit — 依固定自映射重播循環；只對這個完整有限模型推出回返或不回返，不延伸到未給定的系統。
- S084 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S083 · premise_and_result_audit — 以精確有理數重算 point5 step4 affine value，不以小數近似替代。
- S082 · premise_and_result_audit — 以精確有理數重算 point5 step4 product，不以小數近似替代。
- S081 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S080 · premise_and_result_audit — 以精確有理數重算 point5 step3 affine value，不以小數近似替代。
- S079 · premise_and_result_audit — 以精確有理數重算 point5 step3 product，不以小數近似替代。
- S078 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S077 · premise_and_result_audit — 以精確有理數重算 point5 step2 affine value，不以小數近似替代。
- S076 · premise_and_result_audit — 以精確有理數重算 point5 step2 product，不以小數近似替代。
- S075 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S074 · premise_and_result_audit — 以精確有理數重算 point5 step1 affine value，不以小數近似替代。
- S073 · premise_and_result_audit — 以精確有理數重算 point5 step1 product，不以小數近似替代。
- S072 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S071 · premise_and_result_audit — 依固定自映射重播循環；只對這個完整有限模型推出回返或不回返，不延伸到未給定的系統。
- S070 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S069 · premise_and_result_audit — 以精確有理數重算 point4 step5 affine value，不以小數近似替代。
- S068 · premise_and_result_audit — 以精確有理數重算 point4 step5 product，不以小數近似替代。
- S067 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S066 · premise_and_result_audit — 以精確有理數重算 point4 step4 affine value，不以小數近似替代。
- S065 · premise_and_result_audit — 以精確有理數重算 point4 step4 product，不以小數近似替代。
- S064 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S063 · premise_and_result_audit — 以精確有理數重算 point4 step3 affine value，不以小數近似替代。
- S062 · premise_and_result_audit — 以精確有理數重算 point4 step3 product，不以小數近似替代。
- S061 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S060 · premise_and_result_audit — 以精確有理數重算 point4 step2 affine value，不以小數近似替代。
- S059 · premise_and_result_audit — 以精確有理數重算 point4 step2 product，不以小數近似替代。
- S058 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S057 · premise_and_result_audit — 以精確有理數重算 point4 step1 affine value，不以小數近似替代。
- S056 · premise_and_result_audit — 以精確有理數重算 point4 step1 product，不以小數近似替代。
- S055 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S054 · premise_and_result_audit — 依固定自映射重播循環；只對這個完整有限模型推出回返或不回返，不延伸到未給定的系統。
- S053 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S052 · premise_and_result_audit — 以精確有理數重算 point3 step1 affine value，不以小數近似替代。
- S051 · premise_and_result_audit — 以精確有理數重算 point3 step1 product，不以小數近似替代。
- S050 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S049 · premise_and_result_audit — 依固定自映射重播循環；只對這個完整有限模型推出回返或不回返，不延伸到未給定的系統。
- S048 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S047 · premise_and_result_audit — 以精確有理數重算 point2 step5 affine value，不以小數近似替代。
- S046 · premise_and_result_audit — 以精確有理數重算 point2 step5 product，不以小數近似替代。
- S045 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S044 · premise_and_result_audit — 以精確有理數重算 point2 step4 affine value，不以小數近似替代。
- S043 · premise_and_result_audit — 以精確有理數重算 point2 step4 product，不以小數近似替代。
- S042 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S041 · premise_and_result_audit — 以精確有理數重算 point2 step3 affine value，不以小數近似替代。
- S040 · premise_and_result_audit — 以精確有理數重算 point2 step3 product，不以小數近似替代。
- S039 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S038 · premise_and_result_audit — 以精確有理數重算 point2 step2 affine value，不以小數近似替代。
- S037 · premise_and_result_audit — 以精確有理數重算 point2 step2 product，不以小數近似替代。
- S036 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S035 · premise_and_result_audit — 以精確有理數重算 point2 step1 affine value，不以小數近似替代。
- S034 · premise_and_result_audit — 以精確有理數重算 point2 step1 product，不以小數近似替代。
- S033 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S032 · premise_and_result_audit — 依固定自映射重播循環；只對這個完整有限模型推出回返或不回返，不延伸到未給定的系統。
- S031 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S030 · premise_and_result_audit — 以精確有理數重算 point1 step4 affine value，不以小數近似替代。
- S029 · premise_and_result_audit — 以精確有理數重算 point1 step4 product，不以小數近似替代。
- S028 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S027 · premise_and_result_audit — 以精確有理數重算 point1 step3 affine value，不以小數近似替代。
- S026 · premise_and_result_audit — 以精確有理數重算 point1 step3 product，不以小數近似替代。
- S025 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S024 · premise_and_result_audit — 以精確有理數重算 point1 step2 affine value，不以小數近似替代。
- S023 · premise_and_result_audit — 以精確有理數重算 point1 step2 product，不以小數近似替代。
- S022 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S021 · premise_and_result_audit — 以精確有理數重算 point1 step1 affine value，不以小數近似替代。
- S020 · premise_and_result_audit — 以精確有理數重算 point1 step1 product，不以小數近似替代。
- S019 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S018 · premise_and_result_audit — 依固定自映射重播循環；只對這個完整有限模型推出回返或不回返，不延伸到未給定的系統。
- S017 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S016 · premise_and_result_audit — 以精確有理數重算 point0 step5 affine value，不以小數近似替代。
- S015 · premise_and_result_audit — 以精確有理數重算 point0 step5 product，不以小數近似替代。
- S014 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S013 · premise_and_result_audit — 以精確有理數重算 point0 step4 affine value，不以小數近似替代。
- S012 · premise_and_result_audit — 以精確有理數重算 point0 step4 product，不以小數近似替代。
- S011 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S010 · premise_and_result_audit — 以精確有理數重算 point0 step3 affine value，不以小數近似替代。
- S009 · premise_and_result_audit — 以精確有理數重算 point0 step3 product，不以小數近似替代。
- S008 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S007 · premise_and_result_audit — 以精確有理數重算 point0 step2 affine value，不以小數近似替代。
- S006 · premise_and_result_audit — 以精確有理數重算 point0 step2 product，不以小數近似替代。
- S005 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S004 · premise_and_result_audit — 以精確有理數重算 point0 step1 affine value，不以小數近似替代。
- S003 · premise_and_result_audit — 以精確有理數重算 point0 step1 product，不以小數近似替代。
- S002 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。
- S001 · premise_and_result_audit — 回到原始資料與本步條件核對，不把單向推論誤稱等價。





## 結論

(10, 2, -3, 6, [[0, 非週期點], [1, 4], [2, 非週期點], [3, 1], [4, 非週期點], [5, 4], [6, 非週期點], [7, 4], [8, 非週期點], [9, 4]], [1, 3, 5, 7, 9])

依上列完整代值及條件核對得到原題答案；原題編號、格式與狀態保持不變。





## 本題覆核與來源綁定

覆核日期：2026-10-26

原題、答案、步驟表達式、數值 AST 與既有歷史保持原樣；原來的候選狀態屬於來源歷史，不覆寫為形式化證明。

來源雜湊與覆核憑證
- input commit: 0f7be61e2c22317a4075561dc822c87d881a50db
- original question SHA-256: c9ee1ff35e53b7bc88c529786c3e1ab6299dc5462903c5e4b9210ca51c8372cb
- candidate record SHA-256: 1e7d61678d09c46bb3b55a9d3e1cd2dade3c29000a04aaf7e6def7962bd917c2
- semantic review receipt SHA-256: 312ae86315346b8955842a547cb2d09246e1f826755f72c2a51f042e5c7d5c56
- question-first witness SHA-256: 831f449ed41ff9144a290e534aa32adf7252d15b81c16ed5886a7dfd65dee70c
- Lean: NOT_RUN · human review: NOT_PERFORMED

[同源完整 JSON](https://ocme.evemisslab.com/data/question-derivations/questions/q-20261013-advance-20261021-r03-orbit-fixed-periodic-0081.json)




