# 第 33688 題：有限域深度

[返回所在分頁 169](https://ocme.evemisslab.com/zh-Hant/questions/page/169/)

[← 逐題詳解目錄](https://ocme.evemisslab.com/zh-Hant/questions/) · [原題批次](https://ocme.evemisslab.com/zh-Hant/practice/batch-20261014-advance-20261031-r06-finite-field-foundations/#q-20261014-advance-20261031-r06-finite-field-0038)

本頁是已完成第二對話 AI 數理與中英語義覆核的教學詳解，只支持本題明示的模型與前提。沒有人工審查或新 Lean 證明，也不提升原題或 MKO 的 Canonical 真值狀態。

R0066-33688 · q-20261014-advance-20261031-r06-finite-field-0038



## 原題與已知條件

完整prime field Z_p運算。操作=fielddeep-power-cycle；資料={"p":41,"element":13}。請依 [element,powers,last,is_one,certificate] 欄序回答。


- G001 — 完整prime field Z_p運算。操作=fielddeep-power-cycle；資料={"p":41,"element":13}。請依 [element,powers,last,is_one,certificate] 欄序回答。





## 定義與適用範圍

沿用原題明示的論域、假設與來源 MKO 定義。本題已完成第二對話數理與中英語義覆核，並由原始參數逐題獨立重算模型、答案與每個算術步驟；原題仍為 candidate。


- [mko-finite-field](https://ocme.evemisslab.com/zh-Hant/mko/mko-finite-field/)





## 逐步推導

S001 · implies操作前

source roles = [qf-mod31-fielddeep-power-cycle, [domain, element, operation, p]]

操作後

derived = [fielddeep-power-cycle, Exact_prime_field_Zp]

條件：無

原bank的operation是LOCAL hyphen，keys與domain各自精確匹配。欄位順序及數字/Boolean/字串角色依來源，所有有理數文字整數省略/1；不改原題與英文、MKO、AST或狀態。

步驟識別與依賴規則：R66_EXACT_source_bank_keys_local_operation_domain · 依賴：G001





S002 · implies操作前

source roles = [41, [2, 3, 4, 5, 6]]

操作後

derived = [[1, 2, 1, 1, 5], 是]

條件：無

完整試除2到floor(sqrt(p))無因數；若p合成必有其中因數。2也合法。只限定本題Z_p，不把一般有限域都說成prime order或把有限環都說成域。

步驟識別與依賴規則：Field_PRIME_complete_trial_divisor_qualification · 依賴：G001, S001





S003 · calculation操作前

Field ORIGINAL previous power times element k=1 := mul(1, 13)

操作後

Field ORIGINAL previous power times element k=1 = 13

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S002





S004 · implies操作前

source roles = [power exponent1, 13, 41]

操作後

derived = [0, 13]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S003





S005 · calculation操作前

Field ORIGINAL previous power times element k=2 := mul(13, 13)

操作後

Field ORIGINAL previous power times element k=2 = 169

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S004





S006 · implies操作前

source roles = [power exponent2, 169, 41]

操作後

derived = [4, 5]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S005





S007 · calculation操作前

Field ORIGINAL previous power times element k=3 := mul(5, 13)

操作後

Field ORIGINAL previous power times element k=3 = 65

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S006





S008 · implies操作前

source roles = [power exponent3, 65, 41]

操作後

derived = [1, 24]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S007





S009 · calculation操作前

Field ORIGINAL previous power times element k=4 := mul(24, 13)

操作後

Field ORIGINAL previous power times element k=4 = 312

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S008





S010 · implies操作前

source roles = [power exponent4, 312, 41]

操作後

derived = [7, 25]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S009





S011 · calculation操作前

Field ORIGINAL previous power times element k=5 := mul(25, 13)

操作後

Field ORIGINAL previous power times element k=5 = 325

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S010





S012 · implies操作前

source roles = [power exponent5, 325, 41]

操作後

derived = [7, 38]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S011





S013 · calculation操作前

Field ORIGINAL previous power times element k=6 := mul(38, 13)

操作後

Field ORIGINAL previous power times element k=6 = 494

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S012





S014 · implies操作前

source roles = [power exponent6, 494, 41]

操作後

derived = [12, 2]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S013





S015 · calculation操作前

Field ORIGINAL previous power times element k=7 := mul(2, 13)

操作後

Field ORIGINAL previous power times element k=7 = 26

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S014





S016 · implies操作前

source roles = [power exponent7, 26, 41]

操作後

derived = [0, 26]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S015





S017 · calculation操作前

Field ORIGINAL previous power times element k=8 := mul(26, 13)

操作後

Field ORIGINAL previous power times element k=8 = 338

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S016





S018 · implies操作前

source roles = [power exponent8, 338, 41]

操作後

derived = [8, 10]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S017





S019 · calculation操作前

Field ORIGINAL previous power times element k=9 := mul(10, 13)

操作後

Field ORIGINAL previous power times element k=9 = 130

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S018





S020 · implies操作前

source roles = [power exponent9, 130, 41]

操作後

derived = [3, 7]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S019





S021 · calculation操作前

Field ORIGINAL previous power times element k=10 := mul(7, 13)

操作後

Field ORIGINAL previous power times element k=10 = 91

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S020





S022 · implies操作前

source roles = [power exponent10, 91, 41]

操作後

derived = [2, 9]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S021





S023 · calculation操作前

Field ORIGINAL previous power times element k=11 := mul(9, 13)

操作後

Field ORIGINAL previous power times element k=11 = 117

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S022





S024 · implies操作前

source roles = [power exponent11, 117, 41]

操作後

derived = [2, 35]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S023





S025 · calculation操作前

Field ORIGINAL previous power times element k=12 := mul(35, 13)

操作後

Field ORIGINAL previous power times element k=12 = 455

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S024





S026 · implies操作前

source roles = [power exponent12, 455, 41]

操作後

derived = [11, 4]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S025





S027 · calculation操作前

Field ORIGINAL previous power times element k=13 := mul(4, 13)

操作後

Field ORIGINAL previous power times element k=13 = 52

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S026





S028 · implies操作前

source roles = [power exponent13, 52, 41]

操作後

derived = [1, 11]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S027





S029 · calculation操作前

Field ORIGINAL previous power times element k=14 := mul(11, 13)

操作後

Field ORIGINAL previous power times element k=14 = 143

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S028





S030 · implies操作前

source roles = [power exponent14, 143, 41]

操作後

derived = [3, 20]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S029





S031 · calculation操作前

Field ORIGINAL previous power times element k=15 := mul(20, 13)

操作後

Field ORIGINAL previous power times element k=15 = 260

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S030





S032 · implies操作前

source roles = [power exponent15, 260, 41]

操作後

derived = [6, 14]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S031





S033 · calculation操作前

Field ORIGINAL previous power times element k=16 := mul(14, 13)

操作後

Field ORIGINAL previous power times element k=16 = 182

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S032





S034 · implies操作前

source roles = [power exponent16, 182, 41]

操作後

derived = [4, 18]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S033





S035 · calculation操作前

Field ORIGINAL previous power times element k=17 := mul(18, 13)

操作後

Field ORIGINAL previous power times element k=17 = 234

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S034





S036 · implies操作前

source roles = [power exponent17, 234, 41]

操作後

derived = [5, 29]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S035





S037 · calculation操作前

Field ORIGINAL previous power times element k=18 := mul(29, 13)

操作後

Field ORIGINAL previous power times element k=18 = 377

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S036





S038 · implies操作前

source roles = [power exponent18, 377, 41]

操作後

derived = [9, 8]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S037





S039 · calculation操作前

Field ORIGINAL previous power times element k=19 := mul(8, 13)

操作後

Field ORIGINAL previous power times element k=19 = 104

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S038





S040 · implies操作前

source roles = [power exponent19, 104, 41]

操作後

derived = [2, 22]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S039





S041 · calculation操作前

Field ORIGINAL previous power times element k=20 := mul(22, 13)

操作後

Field ORIGINAL previous power times element k=20 = 286

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S040





S042 · implies操作前

source roles = [power exponent20, 286, 41]

操作後

derived = [6, 40]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S041





S043 · calculation操作前

Field ORIGINAL previous power times element k=21 := mul(40, 13)

操作後

Field ORIGINAL previous power times element k=21 = 520

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S042





S044 · implies操作前

source roles = [power exponent21, 520, 41]

操作後

derived = [12, 28]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S043





S045 · calculation操作前

Field ORIGINAL previous power times element k=22 := mul(28, 13)

操作後

Field ORIGINAL previous power times element k=22 = 364

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S044





S046 · implies操作前

source roles = [power exponent22, 364, 41]

操作後

derived = [8, 36]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S045





S047 · calculation操作前

Field ORIGINAL previous power times element k=23 := mul(36, 13)

操作後

Field ORIGINAL previous power times element k=23 = 468

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S046





S048 · implies操作前

source roles = [power exponent23, 468, 41]

操作後

derived = [11, 17]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S047





S049 · calculation操作前

Field ORIGINAL previous power times element k=24 := mul(17, 13)

操作後

Field ORIGINAL previous power times element k=24 = 221

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S048





S050 · implies操作前

source roles = [power exponent24, 221, 41]

操作後

derived = [5, 16]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S049





S051 · calculation操作前

Field ORIGINAL previous power times element k=25 := mul(16, 13)

操作後

Field ORIGINAL previous power times element k=25 = 208

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S050





S052 · implies操作前

source roles = [power exponent25, 208, 41]

操作後

derived = [5, 3]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S051





S053 · calculation操作前

Field ORIGINAL previous power times element k=26 := mul(3, 13)

操作後

Field ORIGINAL previous power times element k=26 = 39

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S052





S054 · implies操作前

source roles = [power exponent26, 39, 41]

操作後

derived = [0, 39]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S053





S055 · calculation操作前

Field ORIGINAL previous power times element k=27 := mul(39, 13)

操作後

Field ORIGINAL previous power times element k=27 = 507

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S054





S056 · implies操作前

source roles = [power exponent27, 507, 41]

操作後

derived = [12, 15]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S055





S057 · calculation操作前

Field ORIGINAL previous power times element k=28 := mul(15, 13)

操作後

Field ORIGINAL previous power times element k=28 = 195

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S056





S058 · implies操作前

source roles = [power exponent28, 195, 41]

操作後

derived = [4, 31]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S057





S059 · calculation操作前

Field ORIGINAL previous power times element k=29 := mul(31, 13)

操作後

Field ORIGINAL previous power times element k=29 = 403

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S058





S060 · implies操作前

source roles = [power exponent29, 403, 41]

操作後

derived = [9, 34]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S059





S061 · calculation操作前

Field ORIGINAL previous power times element k=30 := mul(34, 13)

操作後

Field ORIGINAL previous power times element k=30 = 442

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S060





S062 · implies操作前

source roles = [power exponent30, 442, 41]

操作後

derived = [10, 32]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S061





S063 · calculation操作前

Field ORIGINAL previous power times element k=31 := mul(32, 13)

操作後

Field ORIGINAL previous power times element k=31 = 416

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S062





S064 · implies操作前

source roles = [power exponent31, 416, 41]

操作後

derived = [10, 6]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S063





S065 · calculation操作前

Field ORIGINAL previous power times element k=32 := mul(6, 13)

操作後

Field ORIGINAL previous power times element k=32 = 78

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S064





S066 · implies操作前

source roles = [power exponent32, 78, 41]

操作後

derived = [1, 37]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S065





S067 · calculation操作前

Field ORIGINAL previous power times element k=33 := mul(37, 13)

操作後

Field ORIGINAL previous power times element k=33 = 481

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S066





S068 · implies操作前

source roles = [power exponent33, 481, 41]

操作後

derived = [11, 30]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S067





S069 · calculation操作前

Field ORIGINAL previous power times element k=34 := mul(30, 13)

操作後

Field ORIGINAL previous power times element k=34 = 390

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S068





S070 · implies操作前

source roles = [power exponent34, 390, 41]

操作後

derived = [9, 21]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S069





S071 · calculation操作前

Field ORIGINAL previous power times element k=35 := mul(21, 13)

操作後

Field ORIGINAL previous power times element k=35 = 273

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S070





S072 · implies操作前

source roles = [power exponent35, 273, 41]

操作後

derived = [6, 27]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S071





S073 · calculation操作前

Field ORIGINAL previous power times element k=36 := mul(27, 13)

操作後

Field ORIGINAL previous power times element k=36 = 351

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S072





S074 · implies操作前

source roles = [power exponent36, 351, 41]

操作後

derived = [8, 23]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S073





S075 · calculation操作前

Field ORIGINAL previous power times element k=37 := mul(23, 13)

操作後

Field ORIGINAL previous power times element k=37 = 299

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S074





S076 · implies操作前

source roles = [power exponent37, 299, 41]

操作後

derived = [7, 12]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S075





S077 · calculation操作前

Field ORIGINAL previous power times element k=38 := mul(12, 13)

操作後

Field ORIGINAL previous power times element k=38 = 156

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S076





S078 · implies操作前

source roles = [power exponent38, 156, 41]

操作後

derived = [3, 33]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S077





S079 · calculation操作前

Field ORIGINAL previous power times element k=39 := mul(33, 13)

操作後

Field ORIGINAL previous power times element k=39 = 429

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S078





S080 · implies操作前

source roles = [power exponent39, 429, 41]

操作後

derived = [10, 19]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S079





S081 · calculation操作前

Field ORIGINAL previous power times element k=40 := mul(19, 13)

操作後

Field ORIGINAL previous power times element k=40 = 247

條件：無

按本步原操作數與次序精確運算；來源有理數的pre-reduction界另行保留，不用浮點或偷偷跨bank放寬。

步驟識別與依賴規則：exact_rational_arithmetic · 依賴：G001, S080





S082 · implies操作前

source roles = [power exponent40, 247, 41]

操作後

derived = [6, 1]

條件：無

以整數Euclidean division核value=n*quotient+remainder與0≤remainder<n，負代表元也正規化；不是浮點餘數。

步驟識別與依賴規則：Finite_MOD_euclidean_quotient_remainder · 依賴：G001, S081





S083 · implies操作前

source roles = [41, 13, [13, 5, 24, 25, 38, 2, 26, 10, 7, 9, 35, 4, 11, 20, 14, 18, 29, 8, 22, 40, 28, 36, 17, 16, 3, 39, 15, 31, 34, 32, 6, 37, 30, 21, 27, 23, 12, 33, 19, 1]]

操作後

derived = [1, 是]

條件：無

列全部1..p−1次方，最後為1。非零residue形成乘法群，但此等式不說元素的最小正階恰為p−1，也不認證primitive root。

步驟識別與依賴規則：Field_NONZERO_p_minus_1_power_identity_NOT_exact_order · 依賴：G001, S082









## 逐步反向核對


- S083 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S082 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S081 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=40，不以小數近似替代。
- S080 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S079 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=39，不以小數近似替代。
- S078 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S077 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=38，不以小數近似替代。
- S076 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S075 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=37，不以小數近似替代。
- S074 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S073 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=36，不以小數近似替代。
- S072 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S071 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=35，不以小數近似替代。
- S070 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S069 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=34，不以小數近似替代。
- S068 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S067 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=33，不以小數近似替代。
- S066 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S065 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=32，不以小數近似替代。
- S064 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S063 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=31，不以小數近似替代。
- S062 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S061 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=30，不以小數近似替代。
- S060 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S059 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=29，不以小數近似替代。
- S058 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S057 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=28，不以小數近似替代。
- S056 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S055 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=27，不以小數近似替代。
- S054 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S053 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=26，不以小數近似替代。
- S052 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S051 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=25，不以小數近似替代。
- S050 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S049 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=24，不以小數近似替代。
- S048 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S047 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=23，不以小數近似替代。
- S046 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S045 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=22，不以小數近似替代。
- S044 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S043 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=21，不以小數近似替代。
- S042 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S041 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=20，不以小數近似替代。
- S040 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S039 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=19，不以小數近似替代。
- S038 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S037 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=18，不以小數近似替代。
- S036 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S035 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=17，不以小數近似替代。
- S034 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S033 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=16，不以小數近似替代。
- S032 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S031 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=15，不以小數近似替代。
- S030 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S029 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=14，不以小數近似替代。
- S028 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S027 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=13，不以小數近似替代。
- S026 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S025 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=12，不以小數近似替代。
- S024 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S023 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=11，不以小數近似替代。
- S022 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S021 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=10，不以小數近似替代。
- S020 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S019 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=9，不以小數近似替代。
- S018 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S017 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=8，不以小數近似替代。
- S016 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S015 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=7，不以小數近似替代。
- S014 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S013 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=6，不以小數近似替代。
- S012 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S011 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=5，不以小數近似替代。
- S010 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S009 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=4，不以小數近似替代。
- S008 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S007 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=3，不以小數近似替代。
- S006 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S005 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=2，不以小數近似替代。
- S004 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S003 · premise_and_result_audit — 以精確有理數重算 Field ORIGINAL previous power times element k=1，不以小數近似替代。
- S002 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。
- S001 · premise_and_result_audit — 反向核對本步原始角色、完整前提與欄序；只接受這些條件下的結論，不把單向結論還原為唯一前提，也不把有限核對稱一般形式證明。





## 結論

(13, [13, 5, 24, 25, 38, 2, 26, 10, 7, 9, 35, 4, 11, 20, 14, 18, 29, 8, 22, 40, 28, 36, 17, 16, 3, 39, 15, 31, 34, 32, 6, 37, 30, 21, 27, 23, 12, 33, 19, 1], 1, 是, nonzero_multiplicative_group_cycle)

依上列完整代值及條件核對得到原題答案；原題編號、格式與狀態保持不變。





## 本題覆核與來源綁定

覆核日期：2026-10-26

原題、答案、步驟表達式、數值 AST 與既有歷史保持原樣；原來的候選狀態屬於來源歷史，不覆寫為形式化證明。

來源雜湊與覆核憑證
- input commit: 0f7be61e2c22317a4075561dc822c87d881a50db
- original question SHA-256: cedf00756071839c4c2d9c24d0138085c074a80634652f5c96478d7016d8c4a7
- candidate record SHA-256: cfcfa8acb91c75361fd6fcee179c67c2734eaeeb1bed2683dfc2551238cdb498
- semantic review receipt SHA-256: 99b4f114b2ec93164b6aa5681e0107033a240e7a3f0a8988633ba65320ede267
- question-first witness SHA-256: d9bd3a1940da8a73f790ee3fe460c9a8523791bdbe72c8e0304e3740b66710cc
- Lean: NOT_RUN · human review: NOT_PERFORMED

[同源完整 JSON](https://ocme.evemisslab.com/data/question-derivations/questions/q-20261014-advance-20261031-r06-finite-field-0038.json)




