Explore related knowledge and questions →
← Question derivation index · Original question batch
R0017-09151 · q-20261013-advance-20261018-r04-prime-number-0076
Use natural-number primality: 0 and 1 are not prime. Trial division must cover all candidates through the square-root bound; an incomplete sample is not a primality certificate. lo=0, hi=20, with lo≤hi and a bounded window. Give (lo, hi, every prime in [lo,hi] in increasing order, count).
G001 — Use natural-number primality: 0 and 1 are not prime. Trial division must cover all candidates through the square-root bound; an incomplete sample is not a primality certificate. lo=0, hi=20, with lo≤hi and a bounded window. Give (lo, hi, every prime in [lo,hi] in increasing order, count).Use the original question domain, assumptions and cited MKO definitions. This item has second-context mathematical and bilingual review, with the model, answer and every arithmetic step independently recomputed from the original parameters; the source question remains a candidate.
Before
natural-number prime protocol;0 and1 are not prime
After
a failed candidate witness alone is not a primality proof
Conditions: none
Naturals include0.Primality retains both n≥2 and a complete factor bound.A failed single factor candidate only invalidates that witness;it does not certify primality.
Rule: prime_complete_evidence_scope · Uses: G001
Before
phase=interval value0;n=0
After
n>=2=No
Conditions: none
A prime must be at least2.Exclude0 and1 first rather than treating an absence of trial factors as primality.
Rule: prime_lower_bound_guard · Uses: G001, S001
Before
phase=interval value1;n=1
After
n>=2=No
Conditions: none
A prime must be at least2.Exclude0 and1 first rather than treating an absence of trial factors as primality.
Rule: prime_lower_bound_guard · Uses: G001, S002
Before
phase=interval value2;n=2
After
n>=2=Yes
Conditions: none
A prime must be at least2.Exclude0 and1 first rather than treating an absence of trial factors as primality.
Rule: prime_lower_bound_guard · Uses: G001, S003
Before
phase=interval value2;tried ascending divisors=[];sqrt floor=1
After
least factor at least2=2;prime=Yes
Conditions: none
If n=uv is composite with u,v≥2,one factor is≤sqrt(n).The first zero remainder in ascending order gives the least factor;if none exists through the full bound,n itself is the least factor≥2 and is prime.
Rule: complete_small_factor_bound · Uses: G001, S004
Before
phase=interval value3;n=3
After
n>=2=Yes
Conditions: none
A prime must be at least2.Exclude0 and1 first rather than treating an absence of trial factors as primality.
Rule: prime_lower_bound_guard · Uses: G001, S005
Before
phase=interval value3;tried ascending divisors=[];sqrt floor=1
After
least factor at least2=3;prime=Yes
Conditions: none
If n=uv is composite with u,v≥2,one factor is≤sqrt(n).The first zero remainder in ascending order gives the least factor;if none exists through the full bound,n itself is the least factor≥2 and is prime.
Rule: complete_small_factor_bound · Uses: G001, S006
Before
phase=interval value4;n=4
After
n>=2=Yes
Conditions: none
A prime must be at least2.Exclude0 and1 first rather than treating an absence of trial factors as primality.
Rule: prime_lower_bound_guard · Uses: G001, S007
Before
interval value4 trial divisor2:natural dividend=4;positive divisor=2
After
4=2·2+0
Conditions: none
With a positive divisor show the complete quotient/remainder equality and0≤r<divisor.Modulo zero is not evaluated.
Rule: positive_euclidean_division · Uses: G001, S008
Before
phase=interval value4;tried ascending divisors=[2];sqrt floor=2
After
least factor at least2=2;prime=No
Conditions: none
If n=uv is composite with u,v≥2,one factor is≤sqrt(n).The first zero remainder in ascending order gives the least factor;if none exists through the full bound,n itself is the least factor≥2 and is prime.
Rule: complete_small_factor_bound · Uses: G001, S009
Before
phase=interval value5;n=5
After
n>=2=Yes
Conditions: none
A prime must be at least2.Exclude0 and1 first rather than treating an absence of trial factors as primality.
Rule: prime_lower_bound_guard · Uses: G001, S010
Before
interval value5 trial divisor2:natural dividend=5;positive divisor=2
After
5=2·2+1
Conditions: none
With a positive divisor show the complete quotient/remainder equality and0≤r<divisor.Modulo zero is not evaluated.
Rule: positive_euclidean_division · Uses: G001, S011
Before
phase=interval value5;tried ascending divisors=[2];sqrt floor=2
After
least factor at least2=5;prime=Yes
Conditions: none
If n=uv is composite with u,v≥2,one factor is≤sqrt(n).The first zero remainder in ascending order gives the least factor;if none exists through the full bound,n itself is the least factor≥2 and is prime.
Rule: complete_small_factor_bound · Uses: G001, S012
Before
phase=interval value6;n=6
After
n>=2=Yes
Conditions: none
A prime must be at least2.Exclude0 and1 first rather than treating an absence of trial factors as primality.
Rule: prime_lower_bound_guard · Uses: G001, S013
Before
interval value6 trial divisor2:natural dividend=6;positive divisor=2
After
6=3·2+0
Conditions: none
With a positive divisor show the complete quotient/remainder equality and0≤r<divisor.Modulo zero is not evaluated.
Rule: positive_euclidean_division · Uses: G001, S014
Before
phase=interval value6;tried ascending divisors=[2];sqrt floor=2
After
least factor at least2=2;prime=No
Conditions: none
If n=uv is composite with u,v≥2,one factor is≤sqrt(n).The first zero remainder in ascending order gives the least factor;if none exists through the full bound,n itself is the least factor≥2 and is prime.
Rule: complete_small_factor_bound · Uses: G001, S015
Before
phase=interval value7;n=7
After
n>=2=Yes
Conditions: none
A prime must be at least2.Exclude0 and1 first rather than treating an absence of trial factors as primality.
Rule: prime_lower_bound_guard · Uses: G001, S016
Before
interval value7 trial divisor2:natural dividend=7;positive divisor=2
After
7=3·2+1
Conditions: none
With a positive divisor show the complete quotient/remainder equality and0≤r<divisor.Modulo zero is not evaluated.
Rule: positive_euclidean_division · Uses: G001, S017
Before
phase=interval value7;tried ascending divisors=[2];sqrt floor=2
After
least factor at least2=7;prime=Yes
Conditions: none
If n=uv is composite with u,v≥2,one factor is≤sqrt(n).The first zero remainder in ascending order gives the least factor;if none exists through the full bound,n itself is the least factor≥2 and is prime.
Rule: complete_small_factor_bound · Uses: G001, S018
Before
phase=interval value8;n=8
After
n>=2=Yes
Conditions: none
A prime must be at least2.Exclude0 and1 first rather than treating an absence of trial factors as primality.
Rule: prime_lower_bound_guard · Uses: G001, S019
Before
interval value8 trial divisor2:natural dividend=8;positive divisor=2
After
8=4·2+0
Conditions: none
With a positive divisor show the complete quotient/remainder equality and0≤r<divisor.Modulo zero is not evaluated.
Rule: positive_euclidean_division · Uses: G001, S020
Before
phase=interval value8;tried ascending divisors=[2];sqrt floor=2
After
least factor at least2=2;prime=No
Conditions: none
If n=uv is composite with u,v≥2,one factor is≤sqrt(n).The first zero remainder in ascending order gives the least factor;if none exists through the full bound,n itself is the least factor≥2 and is prime.
Rule: complete_small_factor_bound · Uses: G001, S021
Before
phase=interval value9;n=9
After
n>=2=Yes
Conditions: none
A prime must be at least2.Exclude0 and1 first rather than treating an absence of trial factors as primality.
Rule: prime_lower_bound_guard · Uses: G001, S022
Before
interval value9 trial divisor2:natural dividend=9;positive divisor=2
After
9=4·2+1
Conditions: none
With a positive divisor show the complete quotient/remainder equality and0≤r<divisor.Modulo zero is not evaluated.
Rule: positive_euclidean_division · Uses: G001, S023
Before
interval value9 trial divisor3:natural dividend=9;positive divisor=3
After
9=3·3+0
Conditions: none
With a positive divisor show the complete quotient/remainder equality and0≤r<divisor.Modulo zero is not evaluated.
Rule: positive_euclidean_division · Uses: G001, S024
Before
phase=interval value9;tried ascending divisors=[2, 3];sqrt floor=3
After
least factor at least2=3;prime=No
Conditions: none
If n=uv is composite with u,v≥2,one factor is≤sqrt(n).The first zero remainder in ascending order gives the least factor;if none exists through the full bound,n itself is the least factor≥2 and is prime.
Rule: complete_small_factor_bound · Uses: G001, S025
Before
phase=interval value10;n=10
After
n>=2=Yes
Conditions: none
A prime must be at least2.Exclude0 and1 first rather than treating an absence of trial factors as primality.
Rule: prime_lower_bound_guard · Uses: G001, S026
Before
interval value10 trial divisor2:natural dividend=10;positive divisor=2
After
10=5·2+0
Conditions: none
With a positive divisor show the complete quotient/remainder equality and0≤r<divisor.Modulo zero is not evaluated.
Rule: positive_euclidean_division · Uses: G001, S027
Before
phase=interval value10;tried ascending divisors=[2];sqrt floor=3
After
least factor at least2=2;prime=No
Conditions: none
If n=uv is composite with u,v≥2,one factor is≤sqrt(n).The first zero remainder in ascending order gives the least factor;if none exists through the full bound,n itself is the least factor≥2 and is prime.
Rule: complete_small_factor_bound · Uses: G001, S028
Before
phase=interval value11;n=11
After
n>=2=Yes
Conditions: none
A prime must be at least2.Exclude0 and1 first rather than treating an absence of trial factors as primality.
Rule: prime_lower_bound_guard · Uses: G001, S029
Before
interval value11 trial divisor2:natural dividend=11;positive divisor=2
After
11=5·2+1
Conditions: none
With a positive divisor show the complete quotient/remainder equality and0≤r<divisor.Modulo zero is not evaluated.
Rule: positive_euclidean_division · Uses: G001, S030
Before
interval value11 trial divisor3:natural dividend=11;positive divisor=3
After
11=3·3+2
Conditions: none
With a positive divisor show the complete quotient/remainder equality and0≤r<divisor.Modulo zero is not evaluated.
Rule: positive_euclidean_division · Uses: G001, S031
Before
phase=interval value11;tried ascending divisors=[2, 3];sqrt floor=3
After
least factor at least2=11;prime=Yes
Conditions: none
If n=uv is composite with u,v≥2,one factor is≤sqrt(n).The first zero remainder in ascending order gives the least factor;if none exists through the full bound,n itself is the least factor≥2 and is prime.
Rule: complete_small_factor_bound · Uses: G001, S032
Before
phase=interval value12;n=12
After
n>=2=Yes
Conditions: none
A prime must be at least2.Exclude0 and1 first rather than treating an absence of trial factors as primality.
Rule: prime_lower_bound_guard · Uses: G001, S033
Before
interval value12 trial divisor2:natural dividend=12;positive divisor=2
After
12=6·2+0
Conditions: none
With a positive divisor show the complete quotient/remainder equality and0≤r<divisor.Modulo zero is not evaluated.
Rule: positive_euclidean_division · Uses: G001, S034
Before
phase=interval value12;tried ascending divisors=[2];sqrt floor=3
After
least factor at least2=2;prime=No
Conditions: none
If n=uv is composite with u,v≥2,one factor is≤sqrt(n).The first zero remainder in ascending order gives the least factor;if none exists through the full bound,n itself is the least factor≥2 and is prime.
Rule: complete_small_factor_bound · Uses: G001, S035
Before
phase=interval value13;n=13
After
n>=2=Yes
Conditions: none
A prime must be at least2.Exclude0 and1 first rather than treating an absence of trial factors as primality.
Rule: prime_lower_bound_guard · Uses: G001, S036
Before
interval value13 trial divisor2:natural dividend=13;positive divisor=2
After
13=6·2+1
Conditions: none
With a positive divisor show the complete quotient/remainder equality and0≤r<divisor.Modulo zero is not evaluated.
Rule: positive_euclidean_division · Uses: G001, S037
Before
interval value13 trial divisor3:natural dividend=13;positive divisor=3
After
13=4·3+1
Conditions: none
With a positive divisor show the complete quotient/remainder equality and0≤r<divisor.Modulo zero is not evaluated.
Rule: positive_euclidean_division · Uses: G001, S038
Before
phase=interval value13;tried ascending divisors=[2, 3];sqrt floor=3
After
least factor at least2=13;prime=Yes
Conditions: none
If n=uv is composite with u,v≥2,one factor is≤sqrt(n).The first zero remainder in ascending order gives the least factor;if none exists through the full bound,n itself is the least factor≥2 and is prime.
Rule: complete_small_factor_bound · Uses: G001, S039
Before
phase=interval value14;n=14
After
n>=2=Yes
Conditions: none
A prime must be at least2.Exclude0 and1 first rather than treating an absence of trial factors as primality.
Rule: prime_lower_bound_guard · Uses: G001, S040
Before
interval value14 trial divisor2:natural dividend=14;positive divisor=2
After
14=7·2+0
Conditions: none
With a positive divisor show the complete quotient/remainder equality and0≤r<divisor.Modulo zero is not evaluated.
Rule: positive_euclidean_division · Uses: G001, S041
Before
phase=interval value14;tried ascending divisors=[2];sqrt floor=3
After
least factor at least2=2;prime=No
Conditions: none
If n=uv is composite with u,v≥2,one factor is≤sqrt(n).The first zero remainder in ascending order gives the least factor;if none exists through the full bound,n itself is the least factor≥2 and is prime.
Rule: complete_small_factor_bound · Uses: G001, S042
Before
phase=interval value15;n=15
After
n>=2=Yes
Conditions: none
A prime must be at least2.Exclude0 and1 first rather than treating an absence of trial factors as primality.
Rule: prime_lower_bound_guard · Uses: G001, S043
Before
interval value15 trial divisor2:natural dividend=15;positive divisor=2
After
15=7·2+1
Conditions: none
With a positive divisor show the complete quotient/remainder equality and0≤r<divisor.Modulo zero is not evaluated.
Rule: positive_euclidean_division · Uses: G001, S044
Before
interval value15 trial divisor3:natural dividend=15;positive divisor=3
After
15=5·3+0
Conditions: none
With a positive divisor show the complete quotient/remainder equality and0≤r<divisor.Modulo zero is not evaluated.
Rule: positive_euclidean_division · Uses: G001, S045
Before
phase=interval value15;tried ascending divisors=[2, 3];sqrt floor=3
After
least factor at least2=3;prime=No
Conditions: none
If n=uv is composite with u,v≥2,one factor is≤sqrt(n).The first zero remainder in ascending order gives the least factor;if none exists through the full bound,n itself is the least factor≥2 and is prime.
Rule: complete_small_factor_bound · Uses: G001, S046
Before
phase=interval value16;n=16
After
n>=2=Yes
Conditions: none
A prime must be at least2.Exclude0 and1 first rather than treating an absence of trial factors as primality.
Rule: prime_lower_bound_guard · Uses: G001, S047
Before
interval value16 trial divisor2:natural dividend=16;positive divisor=2
After
16=8·2+0
Conditions: none
With a positive divisor show the complete quotient/remainder equality and0≤r<divisor.Modulo zero is not evaluated.
Rule: positive_euclidean_division · Uses: G001, S048
Before
phase=interval value16;tried ascending divisors=[2];sqrt floor=4
After
least factor at least2=2;prime=No
Conditions: none
If n=uv is composite with u,v≥2,one factor is≤sqrt(n).The first zero remainder in ascending order gives the least factor;if none exists through the full bound,n itself is the least factor≥2 and is prime.
Rule: complete_small_factor_bound · Uses: G001, S049
Before
phase=interval value17;n=17
After
n>=2=Yes
Conditions: none
A prime must be at least2.Exclude0 and1 first rather than treating an absence of trial factors as primality.
Rule: prime_lower_bound_guard · Uses: G001, S050
Before
interval value17 trial divisor2:natural dividend=17;positive divisor=2
After
17=8·2+1
Conditions: none
With a positive divisor show the complete quotient/remainder equality and0≤r<divisor.Modulo zero is not evaluated.
Rule: positive_euclidean_division · Uses: G001, S051
Before
interval value17 trial divisor3:natural dividend=17;positive divisor=3
After
17=5·3+2
Conditions: none
With a positive divisor show the complete quotient/remainder equality and0≤r<divisor.Modulo zero is not evaluated.
Rule: positive_euclidean_division · Uses: G001, S052
Before
interval value17 trial divisor4:natural dividend=17;positive divisor=4
After
17=4·4+1
Conditions: none
With a positive divisor show the complete quotient/remainder equality and0≤r<divisor.Modulo zero is not evaluated.
Rule: positive_euclidean_division · Uses: G001, S053
Before
phase=interval value17;tried ascending divisors=[2, 3, 4];sqrt floor=4
After
least factor at least2=17;prime=Yes
Conditions: none
If n=uv is composite with u,v≥2,one factor is≤sqrt(n).The first zero remainder in ascending order gives the least factor;if none exists through the full bound,n itself is the least factor≥2 and is prime.
Rule: complete_small_factor_bound · Uses: G001, S054
Before
phase=interval value18;n=18
After
n>=2=Yes
Conditions: none
A prime must be at least2.Exclude0 and1 first rather than treating an absence of trial factors as primality.
Rule: prime_lower_bound_guard · Uses: G001, S055
Before
interval value18 trial divisor2:natural dividend=18;positive divisor=2
After
18=9·2+0
Conditions: none
With a positive divisor show the complete quotient/remainder equality and0≤r<divisor.Modulo zero is not evaluated.
Rule: positive_euclidean_division · Uses: G001, S056
Before
phase=interval value18;tried ascending divisors=[2];sqrt floor=4
After
least factor at least2=2;prime=No
Conditions: none
If n=uv is composite with u,v≥2,one factor is≤sqrt(n).The first zero remainder in ascending order gives the least factor;if none exists through the full bound,n itself is the least factor≥2 and is prime.
Rule: complete_small_factor_bound · Uses: G001, S057
Before
phase=interval value19;n=19
After
n>=2=Yes
Conditions: none
A prime must be at least2.Exclude0 and1 first rather than treating an absence of trial factors as primality.
Rule: prime_lower_bound_guard · Uses: G001, S058
Before
interval value19 trial divisor2:natural dividend=19;positive divisor=2
After
19=9·2+1
Conditions: none
With a positive divisor show the complete quotient/remainder equality and0≤r<divisor.Modulo zero is not evaluated.
Rule: positive_euclidean_division · Uses: G001, S059
Before
interval value19 trial divisor3:natural dividend=19;positive divisor=3
After
19=6·3+1
Conditions: none
With a positive divisor show the complete quotient/remainder equality and0≤r<divisor.Modulo zero is not evaluated.
Rule: positive_euclidean_division · Uses: G001, S060
Before
interval value19 trial divisor4:natural dividend=19;positive divisor=4
After
19=4·4+3
Conditions: none
With a positive divisor show the complete quotient/remainder equality and0≤r<divisor.Modulo zero is not evaluated.
Rule: positive_euclidean_division · Uses: G001, S061
Before
phase=interval value19;tried ascending divisors=[2, 3, 4];sqrt floor=4
After
least factor at least2=19;prime=Yes
Conditions: none
If n=uv is composite with u,v≥2,one factor is≤sqrt(n).The first zero remainder in ascending order gives the least factor;if none exists through the full bound,n itself is the least factor≥2 and is prime.
Rule: complete_small_factor_bound · Uses: G001, S062
Before
phase=interval value20;n=20
After
n>=2=Yes
Conditions: none
A prime must be at least2.Exclude0 and1 first rather than treating an absence of trial factors as primality.
Rule: prime_lower_bound_guard · Uses: G001, S063
Before
interval value20 trial divisor2:natural dividend=20;positive divisor=2
After
20=10·2+0
Conditions: none
With a positive divisor show the complete quotient/remainder equality and0≤r<divisor.Modulo zero is not evaluated.
Rule: positive_euclidean_division · Uses: G001, S064
Before
phase=interval value20;tried ascending divisors=[2];sqrt floor=4
After
least factor at least2=2;prime=No
Conditions: none
If n=uv is composite with u,v≥2,one factor is≤sqrt(n).The first zero remainder in ascending order gives the least factor;if none exists through the full bound,n itself is the least factor≥2 and is prime.
Rule: complete_small_factor_bound · Uses: G001, S065
Before
inclusive interval=[0, 20]
After
all primes=[2, 3, 5, 7, 11, 13, 17, 19];count=8
Conditions: none
Check both interval endpoints and retain exactly those values passing the complete primality test.This finite enumeration makes no distribution claim outside the interval.
Rule: complete_inclusive_prime_interval · Uses: G001, S066
S067 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S066 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S065 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S064 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S063 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S062 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S061 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S060 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S059 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S058 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S057 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S056 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S055 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S054 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S053 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S052 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S051 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S050 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S049 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S048 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S047 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S046 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S045 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S044 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S043 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S042 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S041 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S040 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S039 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S038 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S037 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S036 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S035 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S034 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S033 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S032 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S031 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S030 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S029 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S028 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S027 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S026 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S025 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S024 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S023 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S022 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S021 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S020 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S019 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S018 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S017 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S016 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S015 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S014 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S013 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S012 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S011 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S010 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S009 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S008 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S007 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S006 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S005 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S004 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S003 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S002 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.S001 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.(0, 20, [2, 3, 5, 7, 11, 13, 17, 19], 8)
The full substitutions and premise checks give the original answer; source identity,format and status are unchanged.
Review date: 2026-10-26
Original questions, answers, step expressions, numeric ASTs and historical records are retained. Source candidate labels remain historical and are not overwritten as formal proof.
input commit: 0f7be61e2c22317a4075561dc822c87d881a50dboriginal question SHA-256: 029bc3826d07dfb182b8d1af0087657c4ace32b84e4f840165684f234a7e6e61candidate record SHA-256: aef64889d3d14fcdcbf1772f666dabf240366cbe5dca5536df33646e2affc5a1semantic review receipt SHA-256: abad28564830bb9b6ef069ca5a1aa128ce7b1a67a5cb8fe6d868a06db73bcfb8question-first witness SHA-256: 43126988479968837abe086263dac1b24c37463ad80e00d2e280a7b8e9036a04Lean: NOT_RUN · human review: NOT_PERFORMED