Question 22139: An Omitted Divisor Must Be a Discriminative Missing-Term Witness

On this page

Original question and givens
Definition and scope
Step-by-step derivation
Reverse checks
Result
This question review and source binding

← Question derivation index · Original question batch

R0043-22139 · q-20261014-advance-20261110-r06-mobius-inversion-finite-divisors-0089

Original question and givens

Use positive integer n=240, exact integer arithmetic function f(k)=a*k+b with a=14, b=1. F(m) sums f(d) over every positive divisor d of m. Inversion uses mu(d)*F(m/d); complete prime multiplicities determine mu, with mu(1)=1. Do not replace d|m by d≤m or use only prime/proper divisors. Omit divisor=1. Give (n, all_divisors, omitted_divisor, partial_divisors, complete_value, partial_value, f_n, incomplete_certificate, boundary).

G001 — Use positive integer n=240, exact integer arithmetic function f(k)=a*k+b with a=14, b=1. F(m) sums f(d) over every positive divisor d of m. Inversion uses mu(d)*F(m/d); complete prime multiplicities determine mu, with mu(1)=1. Do not replace d|m by d≤m or use only prime/proper divisors. Omit divisor=1. Give (n, all_divisors, omitted_divisor, partial_divisors, complete_value, partial_value, f_n, incomplete_certificate, boundary).

Definition and scope

Use the original question domain, assumptions and cited MKO definitions. This item has second-context mathematical and bilingual review, with the model, answer and every arithmetic step independently recomputed from the original parameters; the source question remains a candidate.

mko-mobius-inversion-finite-divisors

Step-by-step derivation

S001 · implies

Before

source operation=mobinv-incomplete-divisor-boundary;original snapshot and mathematics retained

After

explicit ordered source output fields=[n, all_divisors, omitted_divisor, partial_divisors, complete_value, partial_value, f_n, incomplete_certificate, boundary]

Conditions: none

Retain the historical interface marker and list ordered source fields without JavaScript.MVT fields come from the original mode,without padding or answer-shape inference.Tags and fixed No markers retain their claim scope.

Step identifiers and dependencies

Rule: source_ordered_interface_explicit_without_javascript · Uses: G001

S002 · implies

Before

Mobius inversion ORIGINAL inverse:actual positive input=240;check complete integer range1..240

After

ALL positive divisors INCREASING=[1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 16, 20, 24, 30, 40, 48, 60, 80, 120, 240];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S001

S003 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor1:actual positive input for mu=1

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S002

S004 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor1:input=1;COMPLETE prime multiset=[];distinct primes=[]

After

mu=1;empty product case=Yes;repeated prime=No

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S003

S005 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor1 := div(240, 1)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor1 = 240

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S004

S006 · implies

Before

Mobius inversion ORIGINAL inverse F(n/1):actual positive input=240;check complete integer range1..240

After

ALL positive divisors INCREASING=[1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 16, 20, 24, 30, 40, 48, 60, 80, 120, 240];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S005

S007 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(1) ORIGINAL a times divisor := mul(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(1) ORIGINAL a times divisor = 14

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S006

S008 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(1) plus ORIGINAL b := sum(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(1) plus ORIGINAL b = 15

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S007

S009 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(2) ORIGINAL a times divisor := mul(14, 2)

After

Mobius inversion ORIGINAL inverse F(n/1) f(2) ORIGINAL a times divisor = 28

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S008

S010 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(2) plus ORIGINAL b := sum(28, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(2) plus ORIGINAL b = 29

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S009

S011 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(3) ORIGINAL a times divisor := mul(14, 3)

After

Mobius inversion ORIGINAL inverse F(n/1) f(3) ORIGINAL a times divisor = 42

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S010

S012 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(3) plus ORIGINAL b := sum(42, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(3) plus ORIGINAL b = 43

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S011

S013 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(4) ORIGINAL a times divisor := mul(14, 4)

After

Mobius inversion ORIGINAL inverse F(n/1) f(4) ORIGINAL a times divisor = 56

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S012

S014 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(4) plus ORIGINAL b := sum(56, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(4) plus ORIGINAL b = 57

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S013

S015 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(5) ORIGINAL a times divisor := mul(14, 5)

After

Mobius inversion ORIGINAL inverse F(n/1) f(5) ORIGINAL a times divisor = 70

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S014

S016 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(5) plus ORIGINAL b := sum(70, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(5) plus ORIGINAL b = 71

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S015

S017 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(6) ORIGINAL a times divisor := mul(14, 6)

After

Mobius inversion ORIGINAL inverse F(n/1) f(6) ORIGINAL a times divisor = 84

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S016

S018 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(6) plus ORIGINAL b := sum(84, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(6) plus ORIGINAL b = 85

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S017

S019 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(8) ORIGINAL a times divisor := mul(14, 8)

After

Mobius inversion ORIGINAL inverse F(n/1) f(8) ORIGINAL a times divisor = 112

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S018

S020 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(8) plus ORIGINAL b := sum(112, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(8) plus ORIGINAL b = 113

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S019

S021 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(10) ORIGINAL a times divisor := mul(14, 10)

After

Mobius inversion ORIGINAL inverse F(n/1) f(10) ORIGINAL a times divisor = 140

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S020

S022 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(10) plus ORIGINAL b := sum(140, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(10) plus ORIGINAL b = 141

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S021

S023 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(12) ORIGINAL a times divisor := mul(14, 12)

After

Mobius inversion ORIGINAL inverse F(n/1) f(12) ORIGINAL a times divisor = 168

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S022

S024 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(12) plus ORIGINAL b := sum(168, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(12) plus ORIGINAL b = 169

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S023

S025 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(15) ORIGINAL a times divisor := mul(14, 15)

After

Mobius inversion ORIGINAL inverse F(n/1) f(15) ORIGINAL a times divisor = 210

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S024

S026 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(15) plus ORIGINAL b := sum(210, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(15) plus ORIGINAL b = 211

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S025

S027 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(16) ORIGINAL a times divisor := mul(14, 16)

After

Mobius inversion ORIGINAL inverse F(n/1) f(16) ORIGINAL a times divisor = 224

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S026

S028 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(16) plus ORIGINAL b := sum(224, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(16) plus ORIGINAL b = 225

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S027

S029 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(20) ORIGINAL a times divisor := mul(14, 20)

After

Mobius inversion ORIGINAL inverse F(n/1) f(20) ORIGINAL a times divisor = 280

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S028

S030 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(20) plus ORIGINAL b := sum(280, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(20) plus ORIGINAL b = 281

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S029

S031 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(24) ORIGINAL a times divisor := mul(14, 24)

After

Mobius inversion ORIGINAL inverse F(n/1) f(24) ORIGINAL a times divisor = 336

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S030

S032 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(24) plus ORIGINAL b := sum(336, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(24) plus ORIGINAL b = 337

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S031

S033 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(30) ORIGINAL a times divisor := mul(14, 30)

After

Mobius inversion ORIGINAL inverse F(n/1) f(30) ORIGINAL a times divisor = 420

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S032

S034 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(30) plus ORIGINAL b := sum(420, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(30) plus ORIGINAL b = 421

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S033

S035 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(40) ORIGINAL a times divisor := mul(14, 40)

After

Mobius inversion ORIGINAL inverse F(n/1) f(40) ORIGINAL a times divisor = 560

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S034

S036 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(40) plus ORIGINAL b := sum(560, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(40) plus ORIGINAL b = 561

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S035

S037 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(48) ORIGINAL a times divisor := mul(14, 48)

After

Mobius inversion ORIGINAL inverse F(n/1) f(48) ORIGINAL a times divisor = 672

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S036

S038 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(48) plus ORIGINAL b := sum(672, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(48) plus ORIGINAL b = 673

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S037

S039 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(60) ORIGINAL a times divisor := mul(14, 60)

After

Mobius inversion ORIGINAL inverse F(n/1) f(60) ORIGINAL a times divisor = 840

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S038

S040 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(60) plus ORIGINAL b := sum(840, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(60) plus ORIGINAL b = 841

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S039

S041 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(80) ORIGINAL a times divisor := mul(14, 80)

After

Mobius inversion ORIGINAL inverse F(n/1) f(80) ORIGINAL a times divisor = 1120

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S040

S042 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(80) plus ORIGINAL b := sum(1120, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(80) plus ORIGINAL b = 1121

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S041

S043 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(120) ORIGINAL a times divisor := mul(14, 120)

After

Mobius inversion ORIGINAL inverse F(n/1) f(120) ORIGINAL a times divisor = 1680

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S042

S044 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(120) plus ORIGINAL b := sum(1680, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(120) plus ORIGINAL b = 1681

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S043

S045 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(240) ORIGINAL a times divisor := mul(14, 240)

After

Mobius inversion ORIGINAL inverse F(n/1) f(240) ORIGINAL a times divisor = 3360

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S044

S046 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) f(240) plus ORIGINAL b := sum(3360, 1)

After

Mobius inversion ORIGINAL inverse F(n/1) f(240) plus ORIGINAL b = 3361

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S045

S047 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/1) full forward divisor sum := sum(15, 29, 43, 57, 71, 85, 113, 141, 169, 211, 225, 281, 337, 421, 561, 673, 841, 1121, 1681, 3361)

After

Mobius inversion ORIGINAL inverse F(n/1) full forward divisor sum = 10436

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S046

S048 · calculation

Before

Mobius inversion ORIGINAL inverse mu(1) times SAME F(n/1) := mul(1, 10436)

After

Mobius inversion ORIGINAL inverse mu(1) times SAME F(n/1) = 10436

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S047

S049 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor2:actual positive input for mu=2

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S048

S050 · implies

Before

ORIGINAL positive integer absolute magnitude=2>1

After

initialize remaining=n,prime multiset empty;invariant product(extracted)*remaining=n;every smaller trial divisor has been exhausted

Conditions: none

Divide only by an actual divisor and exhaust smaller candidates,which justifies primality of each extracted divisor without assuming n is prime.

Step identifiers and dependencies

Rule: upf_factorization_remaining_product_invariant · Uses: G001, S049

S051 · calculation

Before

upf canonical complete product factor0 := mul(1, 2)

After

upf canonical complete product factor0 = 2

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S050

S052 · implies

Before

exhausted trial divisors below2;terminal remaining=2;d*d>remaining;ORIGINAL n=2

After

complete increasing prime multiset=[2];full product=2;a composite terminal remainder would have an already tested smaller divisor

Conditions: none

If a terminal remainder greater than1 were composite,its least prime factor would already have been exhausted,a contradiction.The final entry is therefore prime.This certifies this instance;general existence follows by strong induction,recursively splitting a composite into smaller positive factors.

Step identifiers and dependencies

Rule: upf_final_prime_remainder_complete_existence_instance · Uses: G001, S051

S053 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor2:input=2;COMPLETE prime multiset=[2];distinct primes=[2]

After

mu=-1;empty product case=No;repeated prime=No

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S052

S054 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor2 := div(240, 2)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor2 = 120

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S053

S055 · implies

Before

Mobius inversion ORIGINAL inverse F(n/2):actual positive input=120;check complete integer range1..120

After

ALL positive divisors INCREASING=[1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 20, 24, 30, 40, 60, 120];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S054

S056 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(1) ORIGINAL a times divisor := mul(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/2) f(1) ORIGINAL a times divisor = 14

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S055

S057 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(1) plus ORIGINAL b := sum(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/2) f(1) plus ORIGINAL b = 15

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S056

S058 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(2) ORIGINAL a times divisor := mul(14, 2)

After

Mobius inversion ORIGINAL inverse F(n/2) f(2) ORIGINAL a times divisor = 28

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S057

S059 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(2) plus ORIGINAL b := sum(28, 1)

After

Mobius inversion ORIGINAL inverse F(n/2) f(2) plus ORIGINAL b = 29

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S058

S060 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(3) ORIGINAL a times divisor := mul(14, 3)

After

Mobius inversion ORIGINAL inverse F(n/2) f(3) ORIGINAL a times divisor = 42

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S059

S061 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(3) plus ORIGINAL b := sum(42, 1)

After

Mobius inversion ORIGINAL inverse F(n/2) f(3) plus ORIGINAL b = 43

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S060

S062 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(4) ORIGINAL a times divisor := mul(14, 4)

After

Mobius inversion ORIGINAL inverse F(n/2) f(4) ORIGINAL a times divisor = 56

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S061

S063 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(4) plus ORIGINAL b := sum(56, 1)

After

Mobius inversion ORIGINAL inverse F(n/2) f(4) plus ORIGINAL b = 57

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S062

S064 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(5) ORIGINAL a times divisor := mul(14, 5)

After

Mobius inversion ORIGINAL inverse F(n/2) f(5) ORIGINAL a times divisor = 70

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S063

S065 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(5) plus ORIGINAL b := sum(70, 1)

After

Mobius inversion ORIGINAL inverse F(n/2) f(5) plus ORIGINAL b = 71

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S064

S066 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(6) ORIGINAL a times divisor := mul(14, 6)

After

Mobius inversion ORIGINAL inverse F(n/2) f(6) ORIGINAL a times divisor = 84

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S065

S067 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(6) plus ORIGINAL b := sum(84, 1)

After

Mobius inversion ORIGINAL inverse F(n/2) f(6) plus ORIGINAL b = 85

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S066

S068 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(8) ORIGINAL a times divisor := mul(14, 8)

After

Mobius inversion ORIGINAL inverse F(n/2) f(8) ORIGINAL a times divisor = 112

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S067

S069 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(8) plus ORIGINAL b := sum(112, 1)

After

Mobius inversion ORIGINAL inverse F(n/2) f(8) plus ORIGINAL b = 113

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S068

S070 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(10) ORIGINAL a times divisor := mul(14, 10)

After

Mobius inversion ORIGINAL inverse F(n/2) f(10) ORIGINAL a times divisor = 140

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S069

S071 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(10) plus ORIGINAL b := sum(140, 1)

After

Mobius inversion ORIGINAL inverse F(n/2) f(10) plus ORIGINAL b = 141

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S070

S072 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(12) ORIGINAL a times divisor := mul(14, 12)

After

Mobius inversion ORIGINAL inverse F(n/2) f(12) ORIGINAL a times divisor = 168

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S071

S073 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(12) plus ORIGINAL b := sum(168, 1)

After

Mobius inversion ORIGINAL inverse F(n/2) f(12) plus ORIGINAL b = 169

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S072

S074 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(15) ORIGINAL a times divisor := mul(14, 15)

After

Mobius inversion ORIGINAL inverse F(n/2) f(15) ORIGINAL a times divisor = 210

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S073

S075 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(15) plus ORIGINAL b := sum(210, 1)

After

Mobius inversion ORIGINAL inverse F(n/2) f(15) plus ORIGINAL b = 211

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S074

S076 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(20) ORIGINAL a times divisor := mul(14, 20)

After

Mobius inversion ORIGINAL inverse F(n/2) f(20) ORIGINAL a times divisor = 280

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S075

S077 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(20) plus ORIGINAL b := sum(280, 1)

After

Mobius inversion ORIGINAL inverse F(n/2) f(20) plus ORIGINAL b = 281

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S076

S078 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(24) ORIGINAL a times divisor := mul(14, 24)

After

Mobius inversion ORIGINAL inverse F(n/2) f(24) ORIGINAL a times divisor = 336

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S077

S079 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(24) plus ORIGINAL b := sum(336, 1)

After

Mobius inversion ORIGINAL inverse F(n/2) f(24) plus ORIGINAL b = 337

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S078

S080 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(30) ORIGINAL a times divisor := mul(14, 30)

After

Mobius inversion ORIGINAL inverse F(n/2) f(30) ORIGINAL a times divisor = 420

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S079

S081 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(30) plus ORIGINAL b := sum(420, 1)

After

Mobius inversion ORIGINAL inverse F(n/2) f(30) plus ORIGINAL b = 421

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S080

S082 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(40) ORIGINAL a times divisor := mul(14, 40)

After

Mobius inversion ORIGINAL inverse F(n/2) f(40) ORIGINAL a times divisor = 560

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S081

S083 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(40) plus ORIGINAL b := sum(560, 1)

After

Mobius inversion ORIGINAL inverse F(n/2) f(40) plus ORIGINAL b = 561

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S082

S084 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(60) ORIGINAL a times divisor := mul(14, 60)

After

Mobius inversion ORIGINAL inverse F(n/2) f(60) ORIGINAL a times divisor = 840

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S083

S085 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(60) plus ORIGINAL b := sum(840, 1)

After

Mobius inversion ORIGINAL inverse F(n/2) f(60) plus ORIGINAL b = 841

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S084

S086 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(120) ORIGINAL a times divisor := mul(14, 120)

After

Mobius inversion ORIGINAL inverse F(n/2) f(120) ORIGINAL a times divisor = 1680

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S085

S087 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) f(120) plus ORIGINAL b := sum(1680, 1)

After

Mobius inversion ORIGINAL inverse F(n/2) f(120) plus ORIGINAL b = 1681

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S086

S088 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/2) full forward divisor sum := sum(15, 29, 43, 57, 71, 85, 113, 141, 169, 211, 281, 337, 421, 561, 841, 1681)

After

Mobius inversion ORIGINAL inverse F(n/2) full forward divisor sum = 5056

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S087

S089 · calculation

Before

Mobius inversion ORIGINAL inverse mu(2) times SAME F(n/2) := mul(-1, 5056)

After

Mobius inversion ORIGINAL inverse mu(2) times SAME F(n/2) = -5056

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S088

S090 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor3:actual positive input for mu=3

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S089

S091 · implies

Before

ORIGINAL positive integer absolute magnitude=3>1

After

initialize remaining=n,prime multiset empty;invariant product(extracted)*remaining=n;every smaller trial divisor has been exhausted

Conditions: none

Divide only by an actual divisor and exhaust smaller candidates,which justifies primality of each extracted divisor without assuming n is prime.

Step identifiers and dependencies

Rule: upf_factorization_remaining_product_invariant · Uses: G001, S090

S092 · calculation

Before

upf canonical complete product factor0 := mul(1, 3)

After

upf canonical complete product factor0 = 3

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S091

S093 · implies

Before

exhausted trial divisors below2;terminal remaining=3;d*d>remaining;ORIGINAL n=3

After

complete increasing prime multiset=[3];full product=3;a composite terminal remainder would have an already tested smaller divisor

Conditions: none

Step identifiers and dependencies

Rule: upf_final_prime_remainder_complete_existence_instance · Uses: G001, S092

S094 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor3:input=3;COMPLETE prime multiset=[3];distinct primes=[3]

After

mu=-1;empty product case=No;repeated prime=No

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S093

S095 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor3 := div(240, 3)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor3 = 80

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S094

S096 · implies

Before

Mobius inversion ORIGINAL inverse F(n/3):actual positive input=80;check complete integer range1..80

After

ALL positive divisors INCREASING=[1, 2, 4, 5, 8, 10, 16, 20, 40, 80];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S095

S097 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/3) f(1) ORIGINAL a times divisor := mul(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/3) f(1) ORIGINAL a times divisor = 14

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S096

S098 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/3) f(1) plus ORIGINAL b := sum(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/3) f(1) plus ORIGINAL b = 15

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S097

S099 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/3) f(2) ORIGINAL a times divisor := mul(14, 2)

After

Mobius inversion ORIGINAL inverse F(n/3) f(2) ORIGINAL a times divisor = 28

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S098

S100 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/3) f(2) plus ORIGINAL b := sum(28, 1)

After

Mobius inversion ORIGINAL inverse F(n/3) f(2) plus ORIGINAL b = 29

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S099

S101 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/3) f(4) ORIGINAL a times divisor := mul(14, 4)

After

Mobius inversion ORIGINAL inverse F(n/3) f(4) ORIGINAL a times divisor = 56

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S100

S102 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/3) f(4) plus ORIGINAL b := sum(56, 1)

After

Mobius inversion ORIGINAL inverse F(n/3) f(4) plus ORIGINAL b = 57

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S101

S103 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/3) f(5) ORIGINAL a times divisor := mul(14, 5)

After

Mobius inversion ORIGINAL inverse F(n/3) f(5) ORIGINAL a times divisor = 70

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S102

S104 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/3) f(5) plus ORIGINAL b := sum(70, 1)

After

Mobius inversion ORIGINAL inverse F(n/3) f(5) plus ORIGINAL b = 71

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S103

S105 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/3) f(8) ORIGINAL a times divisor := mul(14, 8)

After

Mobius inversion ORIGINAL inverse F(n/3) f(8) ORIGINAL a times divisor = 112

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S104

S106 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/3) f(8) plus ORIGINAL b := sum(112, 1)

After

Mobius inversion ORIGINAL inverse F(n/3) f(8) plus ORIGINAL b = 113

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S105

S107 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/3) f(10) ORIGINAL a times divisor := mul(14, 10)

After

Mobius inversion ORIGINAL inverse F(n/3) f(10) ORIGINAL a times divisor = 140

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S106

S108 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/3) f(10) plus ORIGINAL b := sum(140, 1)

After

Mobius inversion ORIGINAL inverse F(n/3) f(10) plus ORIGINAL b = 141

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S107

S109 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/3) f(16) ORIGINAL a times divisor := mul(14, 16)

After

Mobius inversion ORIGINAL inverse F(n/3) f(16) ORIGINAL a times divisor = 224

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S108

S110 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/3) f(16) plus ORIGINAL b := sum(224, 1)

After

Mobius inversion ORIGINAL inverse F(n/3) f(16) plus ORIGINAL b = 225

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S109

S111 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/3) f(20) ORIGINAL a times divisor := mul(14, 20)

After

Mobius inversion ORIGINAL inverse F(n/3) f(20) ORIGINAL a times divisor = 280

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S110

S112 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/3) f(20) plus ORIGINAL b := sum(280, 1)

After

Mobius inversion ORIGINAL inverse F(n/3) f(20) plus ORIGINAL b = 281

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S111

S113 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/3) f(40) ORIGINAL a times divisor := mul(14, 40)

After

Mobius inversion ORIGINAL inverse F(n/3) f(40) ORIGINAL a times divisor = 560

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S112

S114 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/3) f(40) plus ORIGINAL b := sum(560, 1)

After

Mobius inversion ORIGINAL inverse F(n/3) f(40) plus ORIGINAL b = 561

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S113

S115 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/3) f(80) ORIGINAL a times divisor := mul(14, 80)

After

Mobius inversion ORIGINAL inverse F(n/3) f(80) ORIGINAL a times divisor = 1120

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S114

S116 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/3) f(80) plus ORIGINAL b := sum(1120, 1)

After

Mobius inversion ORIGINAL inverse F(n/3) f(80) plus ORIGINAL b = 1121

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S115

S117 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/3) full forward divisor sum := sum(15, 29, 57, 71, 113, 141, 225, 281, 561, 1121)

After

Mobius inversion ORIGINAL inverse F(n/3) full forward divisor sum = 2614

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S116

S118 · calculation

Before

Mobius inversion ORIGINAL inverse mu(3) times SAME F(n/3) := mul(-1, 2614)

After

Mobius inversion ORIGINAL inverse mu(3) times SAME F(n/3) = -2614

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S117

S119 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor4:actual positive input for mu=4

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S118

S120 · implies

Before

ORIGINAL positive integer absolute magnitude=4>1

After

initialize remaining=n,prime multiset empty;invariant product(extracted)*remaining=n;every smaller trial divisor has been exhausted

Conditions: none

Divide only by an actual divisor and exhaust smaller candidates,which justifies primality of each extracted divisor without assuming n is prime.

Step identifiers and dependencies

Rule: upf_factorization_remaining_product_invariant · Uses: G001, S119

S121 · calculation

Before

upf extract divisor2 occurrence0 := div(4, 2)

After

upf extract divisor2 occurrence0 = 2

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S120

S122 · calculation

Before

upf extract divisor2 occurrence1 := div(2, 2)

After

upf extract divisor2 occurrence1 = 1

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S121

S123 · implies

Before

next divisor=2;previous remaining=4;all smaller divisors exhausted

After

extracted multiplicity=2;next remaining=1;remaining modulo2=1;extracted multiset=[2, 2]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S122

S124 · calculation

Before

upf canonical complete product factor0 := mul(1, 2)

After

upf canonical complete product factor0 = 2

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S123

S125 · calculation

Before

upf canonical complete product factor1 := mul(2, 2)

After

upf canonical complete product factor1 = 4

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S124

S126 · implies

Before

exhausted trial divisors below3;terminal remaining=1;d*d>remaining;ORIGINAL n=4

After

complete increasing prime multiset=[2, 2];full product=4;a composite terminal remainder would have an already tested smaller divisor

Conditions: none

Step identifiers and dependencies

Rule: upf_final_prime_remainder_complete_existence_instance · Uses: G001, S125

S127 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor4:input=4;COMPLETE prime multiset=[2, 2];distinct primes=[2]

After

mu=0;empty product case=No;repeated prime=Yes

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S126

S128 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor4 := div(240, 4)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor4 = 60

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S127

S129 · implies

Before

Mobius inversion ORIGINAL inverse F(n/4):actual positive input=60;check complete integer range1..60

After

ALL positive divisors INCREASING=[1, 2, 3, 4, 5, 6, 10, 12, 15, 20, 30, 60];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S128

S130 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/4) f(1) ORIGINAL a times divisor := mul(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/4) f(1) ORIGINAL a times divisor = 14

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S129

S131 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/4) f(1) plus ORIGINAL b := sum(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/4) f(1) plus ORIGINAL b = 15

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S130

S132 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/4) f(2) ORIGINAL a times divisor := mul(14, 2)

After

Mobius inversion ORIGINAL inverse F(n/4) f(2) ORIGINAL a times divisor = 28

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S131

S133 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/4) f(2) plus ORIGINAL b := sum(28, 1)

After

Mobius inversion ORIGINAL inverse F(n/4) f(2) plus ORIGINAL b = 29

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S132

S134 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/4) f(3) ORIGINAL a times divisor := mul(14, 3)

After

Mobius inversion ORIGINAL inverse F(n/4) f(3) ORIGINAL a times divisor = 42

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S133

S135 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/4) f(3) plus ORIGINAL b := sum(42, 1)

After

Mobius inversion ORIGINAL inverse F(n/4) f(3) plus ORIGINAL b = 43

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S134

S136 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/4) f(4) ORIGINAL a times divisor := mul(14, 4)

After

Mobius inversion ORIGINAL inverse F(n/4) f(4) ORIGINAL a times divisor = 56

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S135

S137 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/4) f(4) plus ORIGINAL b := sum(56, 1)

After

Mobius inversion ORIGINAL inverse F(n/4) f(4) plus ORIGINAL b = 57

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S136

S138 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/4) f(5) ORIGINAL a times divisor := mul(14, 5)

After

Mobius inversion ORIGINAL inverse F(n/4) f(5) ORIGINAL a times divisor = 70

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S137

S139 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/4) f(5) plus ORIGINAL b := sum(70, 1)

After

Mobius inversion ORIGINAL inverse F(n/4) f(5) plus ORIGINAL b = 71

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S138

S140 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/4) f(6) ORIGINAL a times divisor := mul(14, 6)

After

Mobius inversion ORIGINAL inverse F(n/4) f(6) ORIGINAL a times divisor = 84

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S139

S141 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/4) f(6) plus ORIGINAL b := sum(84, 1)

After

Mobius inversion ORIGINAL inverse F(n/4) f(6) plus ORIGINAL b = 85

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S140

S142 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/4) f(10) ORIGINAL a times divisor := mul(14, 10)

After

Mobius inversion ORIGINAL inverse F(n/4) f(10) ORIGINAL a times divisor = 140

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S141

S143 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/4) f(10) plus ORIGINAL b := sum(140, 1)

After

Mobius inversion ORIGINAL inverse F(n/4) f(10) plus ORIGINAL b = 141

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S142

S144 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/4) f(12) ORIGINAL a times divisor := mul(14, 12)

After

Mobius inversion ORIGINAL inverse F(n/4) f(12) ORIGINAL a times divisor = 168

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S143

S145 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/4) f(12) plus ORIGINAL b := sum(168, 1)

After

Mobius inversion ORIGINAL inverse F(n/4) f(12) plus ORIGINAL b = 169

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S144

S146 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/4) f(15) ORIGINAL a times divisor := mul(14, 15)

After

Mobius inversion ORIGINAL inverse F(n/4) f(15) ORIGINAL a times divisor = 210

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S145

S147 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/4) f(15) plus ORIGINAL b := sum(210, 1)

After

Mobius inversion ORIGINAL inverse F(n/4) f(15) plus ORIGINAL b = 211

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S146

S148 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/4) f(20) ORIGINAL a times divisor := mul(14, 20)

After

Mobius inversion ORIGINAL inverse F(n/4) f(20) ORIGINAL a times divisor = 280

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S147

S149 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/4) f(20) plus ORIGINAL b := sum(280, 1)

After

Mobius inversion ORIGINAL inverse F(n/4) f(20) plus ORIGINAL b = 281

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S148

S150 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/4) f(30) ORIGINAL a times divisor := mul(14, 30)

After

Mobius inversion ORIGINAL inverse F(n/4) f(30) ORIGINAL a times divisor = 420

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S149

S151 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/4) f(30) plus ORIGINAL b := sum(420, 1)

After

Mobius inversion ORIGINAL inverse F(n/4) f(30) plus ORIGINAL b = 421

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S150

S152 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/4) f(60) ORIGINAL a times divisor := mul(14, 60)

After

Mobius inversion ORIGINAL inverse F(n/4) f(60) ORIGINAL a times divisor = 840

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S151

S153 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/4) f(60) plus ORIGINAL b := sum(840, 1)

After

Mobius inversion ORIGINAL inverse F(n/4) f(60) plus ORIGINAL b = 841

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S152

S154 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/4) full forward divisor sum := sum(15, 29, 43, 57, 71, 85, 141, 169, 211, 281, 421, 841)

After

Mobius inversion ORIGINAL inverse F(n/4) full forward divisor sum = 2364

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S153

S155 · calculation

Before

Mobius inversion ORIGINAL inverse mu(4) times SAME F(n/4) := mul(0, 2364)

After

Mobius inversion ORIGINAL inverse mu(4) times SAME F(n/4) = 0

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S154

S156 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor5:actual positive input for mu=5

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S155

S157 · implies

Before

ORIGINAL positive integer absolute magnitude=5>1

After

initialize remaining=n,prime multiset empty;invariant product(extracted)*remaining=n;every smaller trial divisor has been exhausted

Conditions: none

Divide only by an actual divisor and exhaust smaller candidates,which justifies primality of each extracted divisor without assuming n is prime.

Step identifiers and dependencies

Rule: upf_factorization_remaining_product_invariant · Uses: G001, S156

S158 · implies

Before

next divisor=2;previous remaining=5;all smaller divisors exhausted

After

extracted multiplicity=0;next remaining=5;remaining modulo2=1;extracted multiset=[]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S157

S159 · calculation

Before

upf canonical complete product factor0 := mul(1, 5)

After

upf canonical complete product factor0 = 5

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S158

S160 · implies

Before

exhausted trial divisors below3;terminal remaining=5;d*d>remaining;ORIGINAL n=5

After

complete increasing prime multiset=[5];full product=5;a composite terminal remainder would have an already tested smaller divisor

Conditions: none

Step identifiers and dependencies

Rule: upf_final_prime_remainder_complete_existence_instance · Uses: G001, S159

S161 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor5:input=5;COMPLETE prime multiset=[5];distinct primes=[5]

After

mu=-1;empty product case=No;repeated prime=No

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S160

S162 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor5 := div(240, 5)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor5 = 48

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S161

S163 · implies

Before

Mobius inversion ORIGINAL inverse F(n/5):actual positive input=48;check complete integer range1..48

After

ALL positive divisors INCREASING=[1, 2, 3, 4, 6, 8, 12, 16, 24, 48];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S162

S164 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(1) ORIGINAL a times divisor := mul(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/5) f(1) ORIGINAL a times divisor = 14

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S163

S165 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(1) plus ORIGINAL b := sum(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/5) f(1) plus ORIGINAL b = 15

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S164

S166 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(2) ORIGINAL a times divisor := mul(14, 2)

After

Mobius inversion ORIGINAL inverse F(n/5) f(2) ORIGINAL a times divisor = 28

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S165

S167 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(2) plus ORIGINAL b := sum(28, 1)

After

Mobius inversion ORIGINAL inverse F(n/5) f(2) plus ORIGINAL b = 29

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S166

S168 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(3) ORIGINAL a times divisor := mul(14, 3)

After

Mobius inversion ORIGINAL inverse F(n/5) f(3) ORIGINAL a times divisor = 42

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S167

S169 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(3) plus ORIGINAL b := sum(42, 1)

After

Mobius inversion ORIGINAL inverse F(n/5) f(3) plus ORIGINAL b = 43

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S168

S170 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(4) ORIGINAL a times divisor := mul(14, 4)

After

Mobius inversion ORIGINAL inverse F(n/5) f(4) ORIGINAL a times divisor = 56

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S169

S171 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(4) plus ORIGINAL b := sum(56, 1)

After

Mobius inversion ORIGINAL inverse F(n/5) f(4) plus ORIGINAL b = 57

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S170

S172 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(6) ORIGINAL a times divisor := mul(14, 6)

After

Mobius inversion ORIGINAL inverse F(n/5) f(6) ORIGINAL a times divisor = 84

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S171

S173 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(6) plus ORIGINAL b := sum(84, 1)

After

Mobius inversion ORIGINAL inverse F(n/5) f(6) plus ORIGINAL b = 85

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S172

S174 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(8) ORIGINAL a times divisor := mul(14, 8)

After

Mobius inversion ORIGINAL inverse F(n/5) f(8) ORIGINAL a times divisor = 112

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S173

S175 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(8) plus ORIGINAL b := sum(112, 1)

After

Mobius inversion ORIGINAL inverse F(n/5) f(8) plus ORIGINAL b = 113

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S174

S176 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(12) ORIGINAL a times divisor := mul(14, 12)

After

Mobius inversion ORIGINAL inverse F(n/5) f(12) ORIGINAL a times divisor = 168

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S175

S177 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(12) plus ORIGINAL b := sum(168, 1)

After

Mobius inversion ORIGINAL inverse F(n/5) f(12) plus ORIGINAL b = 169

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S176

S178 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(16) ORIGINAL a times divisor := mul(14, 16)

After

Mobius inversion ORIGINAL inverse F(n/5) f(16) ORIGINAL a times divisor = 224

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S177

S179 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(16) plus ORIGINAL b := sum(224, 1)

After

Mobius inversion ORIGINAL inverse F(n/5) f(16) plus ORIGINAL b = 225

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S178

S180 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(24) ORIGINAL a times divisor := mul(14, 24)

After

Mobius inversion ORIGINAL inverse F(n/5) f(24) ORIGINAL a times divisor = 336

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S179

S181 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(24) plus ORIGINAL b := sum(336, 1)

After

Mobius inversion ORIGINAL inverse F(n/5) f(24) plus ORIGINAL b = 337

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S180

S182 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(48) ORIGINAL a times divisor := mul(14, 48)

After

Mobius inversion ORIGINAL inverse F(n/5) f(48) ORIGINAL a times divisor = 672

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S181

S183 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) f(48) plus ORIGINAL b := sum(672, 1)

After

Mobius inversion ORIGINAL inverse F(n/5) f(48) plus ORIGINAL b = 673

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S182

S184 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/5) full forward divisor sum := sum(15, 29, 43, 57, 85, 113, 169, 225, 337, 673)

After

Mobius inversion ORIGINAL inverse F(n/5) full forward divisor sum = 1746

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S183

S185 · calculation

Before

Mobius inversion ORIGINAL inverse mu(5) times SAME F(n/5) := mul(-1, 1746)

After

Mobius inversion ORIGINAL inverse mu(5) times SAME F(n/5) = -1746

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S184

S186 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor6:actual positive input for mu=6

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S185

S187 · implies

Before

ORIGINAL positive integer absolute magnitude=6>1

After

initialize remaining=n,prime multiset empty;invariant product(extracted)*remaining=n;every smaller trial divisor has been exhausted

Conditions: none

Divide only by an actual divisor and exhaust smaller candidates,which justifies primality of each extracted divisor without assuming n is prime.

Step identifiers and dependencies

Rule: upf_factorization_remaining_product_invariant · Uses: G001, S186

S188 · calculation

Before

upf extract divisor2 occurrence0 := div(6, 2)

After

upf extract divisor2 occurrence0 = 3

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S187

S189 · implies

Before

next divisor=2;previous remaining=6;all smaller divisors exhausted

After

extracted multiplicity=1;next remaining=3;remaining modulo2=1;extracted multiset=[2]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S188

S190 · calculation

Before

upf canonical complete product factor0 := mul(1, 2)

After

upf canonical complete product factor0 = 2

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S189

S191 · calculation

Before

upf canonical complete product factor1 := mul(2, 3)

After

upf canonical complete product factor1 = 6

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S190

S192 · implies

Before

exhausted trial divisors below3;terminal remaining=3;d*d>remaining;ORIGINAL n=6

After

complete increasing prime multiset=[2, 3];full product=6;a composite terminal remainder would have an already tested smaller divisor

Conditions: none

Step identifiers and dependencies

Rule: upf_final_prime_remainder_complete_existence_instance · Uses: G001, S191

S193 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor6:input=6;COMPLETE prime multiset=[2, 3];distinct primes=[2, 3]

After

mu=1;empty product case=No;repeated prime=No

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S192

S194 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor6 := div(240, 6)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor6 = 40

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S193

S195 · implies

Before

Mobius inversion ORIGINAL inverse F(n/6):actual positive input=40;check complete integer range1..40

After

ALL positive divisors INCREASING=[1, 2, 4, 5, 8, 10, 20, 40];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S194

S196 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/6) f(1) ORIGINAL a times divisor := mul(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/6) f(1) ORIGINAL a times divisor = 14

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S195

S197 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/6) f(1) plus ORIGINAL b := sum(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/6) f(1) plus ORIGINAL b = 15

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S196

S198 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/6) f(2) ORIGINAL a times divisor := mul(14, 2)

After

Mobius inversion ORIGINAL inverse F(n/6) f(2) ORIGINAL a times divisor = 28

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S197

S199 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/6) f(2) plus ORIGINAL b := sum(28, 1)

After

Mobius inversion ORIGINAL inverse F(n/6) f(2) plus ORIGINAL b = 29

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S198

S200 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/6) f(4) ORIGINAL a times divisor := mul(14, 4)

After

Mobius inversion ORIGINAL inverse F(n/6) f(4) ORIGINAL a times divisor = 56

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S199

S201 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/6) f(4) plus ORIGINAL b := sum(56, 1)

After

Mobius inversion ORIGINAL inverse F(n/6) f(4) plus ORIGINAL b = 57

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S200

S202 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/6) f(5) ORIGINAL a times divisor := mul(14, 5)

After

Mobius inversion ORIGINAL inverse F(n/6) f(5) ORIGINAL a times divisor = 70

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S201

S203 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/6) f(5) plus ORIGINAL b := sum(70, 1)

After

Mobius inversion ORIGINAL inverse F(n/6) f(5) plus ORIGINAL b = 71

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S202

S204 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/6) f(8) ORIGINAL a times divisor := mul(14, 8)

After

Mobius inversion ORIGINAL inverse F(n/6) f(8) ORIGINAL a times divisor = 112

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S203

S205 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/6) f(8) plus ORIGINAL b := sum(112, 1)

After

Mobius inversion ORIGINAL inverse F(n/6) f(8) plus ORIGINAL b = 113

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S204

S206 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/6) f(10) ORIGINAL a times divisor := mul(14, 10)

After

Mobius inversion ORIGINAL inverse F(n/6) f(10) ORIGINAL a times divisor = 140

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S205

S207 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/6) f(10) plus ORIGINAL b := sum(140, 1)

After

Mobius inversion ORIGINAL inverse F(n/6) f(10) plus ORIGINAL b = 141

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S206

S208 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/6) f(20) ORIGINAL a times divisor := mul(14, 20)

After

Mobius inversion ORIGINAL inverse F(n/6) f(20) ORIGINAL a times divisor = 280

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S207

S209 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/6) f(20) plus ORIGINAL b := sum(280, 1)

After

Mobius inversion ORIGINAL inverse F(n/6) f(20) plus ORIGINAL b = 281

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S208

S210 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/6) f(40) ORIGINAL a times divisor := mul(14, 40)

After

Mobius inversion ORIGINAL inverse F(n/6) f(40) ORIGINAL a times divisor = 560

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S209

S211 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/6) f(40) plus ORIGINAL b := sum(560, 1)

After

Mobius inversion ORIGINAL inverse F(n/6) f(40) plus ORIGINAL b = 561

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S210

S212 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/6) full forward divisor sum := sum(15, 29, 57, 71, 113, 141, 281, 561)

After

Mobius inversion ORIGINAL inverse F(n/6) full forward divisor sum = 1268

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S211

S213 · calculation

Before

Mobius inversion ORIGINAL inverse mu(6) times SAME F(n/6) := mul(1, 1268)

After

Mobius inversion ORIGINAL inverse mu(6) times SAME F(n/6) = 1268

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S212

S214 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor8:actual positive input for mu=8

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S213

S215 · implies

Before

ORIGINAL positive integer absolute magnitude=8>1

After

initialize remaining=n,prime multiset empty;invariant product(extracted)*remaining=n;every smaller trial divisor has been exhausted

Conditions: none

Divide only by an actual divisor and exhaust smaller candidates,which justifies primality of each extracted divisor without assuming n is prime.

Step identifiers and dependencies

Rule: upf_factorization_remaining_product_invariant · Uses: G001, S214

S216 · calculation

Before

upf extract divisor2 occurrence0 := div(8, 2)

After

upf extract divisor2 occurrence0 = 4

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S215

S217 · calculation

Before

upf extract divisor2 occurrence1 := div(4, 2)

After

upf extract divisor2 occurrence1 = 2

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S216

S218 · calculation

Before

upf extract divisor2 occurrence2 := div(2, 2)

After

upf extract divisor2 occurrence2 = 1

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S217

S219 · implies

Before

next divisor=2;previous remaining=8;all smaller divisors exhausted

After

extracted multiplicity=3;next remaining=1;remaining modulo2=1;extracted multiset=[2, 2, 2]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S218

S220 · calculation

Before

upf canonical complete product factor0 := mul(1, 2)

After

upf canonical complete product factor0 = 2

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S219

S221 · calculation

Before

upf canonical complete product factor1 := mul(2, 2)

After

upf canonical complete product factor1 = 4

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S220

S222 · calculation

Before

upf canonical complete product factor2 := mul(4, 2)

After

upf canonical complete product factor2 = 8

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S221

S223 · implies

Before

exhausted trial divisors below3;terminal remaining=1;d*d>remaining;ORIGINAL n=8

After

complete increasing prime multiset=[2, 2, 2];full product=8;a composite terminal remainder would have an already tested smaller divisor

Conditions: none

Step identifiers and dependencies

Rule: upf_final_prime_remainder_complete_existence_instance · Uses: G001, S222

S224 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor8:input=8;COMPLETE prime multiset=[2, 2, 2];distinct primes=[2]

After

mu=0;empty product case=No;repeated prime=Yes

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S223

S225 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor8 := div(240, 8)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor8 = 30

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S224

S226 · implies

Before

Mobius inversion ORIGINAL inverse F(n/8):actual positive input=30;check complete integer range1..30

After

ALL positive divisors INCREASING=[1, 2, 3, 5, 6, 10, 15, 30];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S225

S227 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/8) f(1) ORIGINAL a times divisor := mul(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/8) f(1) ORIGINAL a times divisor = 14

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S226

S228 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/8) f(1) plus ORIGINAL b := sum(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/8) f(1) plus ORIGINAL b = 15

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S227

S229 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/8) f(2) ORIGINAL a times divisor := mul(14, 2)

After

Mobius inversion ORIGINAL inverse F(n/8) f(2) ORIGINAL a times divisor = 28

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S228

S230 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/8) f(2) plus ORIGINAL b := sum(28, 1)

After

Mobius inversion ORIGINAL inverse F(n/8) f(2) plus ORIGINAL b = 29

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S229

S231 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/8) f(3) ORIGINAL a times divisor := mul(14, 3)

After

Mobius inversion ORIGINAL inverse F(n/8) f(3) ORIGINAL a times divisor = 42

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S230

S232 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/8) f(3) plus ORIGINAL b := sum(42, 1)

After

Mobius inversion ORIGINAL inverse F(n/8) f(3) plus ORIGINAL b = 43

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S231

S233 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/8) f(5) ORIGINAL a times divisor := mul(14, 5)

After

Mobius inversion ORIGINAL inverse F(n/8) f(5) ORIGINAL a times divisor = 70

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S232

S234 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/8) f(5) plus ORIGINAL b := sum(70, 1)

After

Mobius inversion ORIGINAL inverse F(n/8) f(5) plus ORIGINAL b = 71

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S233

S235 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/8) f(6) ORIGINAL a times divisor := mul(14, 6)

After

Mobius inversion ORIGINAL inverse F(n/8) f(6) ORIGINAL a times divisor = 84

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S234

S236 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/8) f(6) plus ORIGINAL b := sum(84, 1)

After

Mobius inversion ORIGINAL inverse F(n/8) f(6) plus ORIGINAL b = 85

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S235

S237 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/8) f(10) ORIGINAL a times divisor := mul(14, 10)

After

Mobius inversion ORIGINAL inverse F(n/8) f(10) ORIGINAL a times divisor = 140

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S236

S238 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/8) f(10) plus ORIGINAL b := sum(140, 1)

After

Mobius inversion ORIGINAL inverse F(n/8) f(10) plus ORIGINAL b = 141

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S237

S239 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/8) f(15) ORIGINAL a times divisor := mul(14, 15)

After

Mobius inversion ORIGINAL inverse F(n/8) f(15) ORIGINAL a times divisor = 210

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S238

S240 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/8) f(15) plus ORIGINAL b := sum(210, 1)

After

Mobius inversion ORIGINAL inverse F(n/8) f(15) plus ORIGINAL b = 211

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S239

S241 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/8) f(30) ORIGINAL a times divisor := mul(14, 30)

After

Mobius inversion ORIGINAL inverse F(n/8) f(30) ORIGINAL a times divisor = 420

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S240

S242 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/8) f(30) plus ORIGINAL b := sum(420, 1)

After

Mobius inversion ORIGINAL inverse F(n/8) f(30) plus ORIGINAL b = 421

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S241

S243 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/8) full forward divisor sum := sum(15, 29, 43, 71, 85, 141, 211, 421)

After

Mobius inversion ORIGINAL inverse F(n/8) full forward divisor sum = 1016

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S242

S244 · calculation

Before

Mobius inversion ORIGINAL inverse mu(8) times SAME F(n/8) := mul(0, 1016)

After

Mobius inversion ORIGINAL inverse mu(8) times SAME F(n/8) = 0

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S243

S245 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor10:actual positive input for mu=10

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S244

S246 · implies

Before

ORIGINAL positive integer absolute magnitude=10>1

After

initialize remaining=n,prime multiset empty;invariant product(extracted)*remaining=n;every smaller trial divisor has been exhausted

Conditions: none

Divide only by an actual divisor and exhaust smaller candidates,which justifies primality of each extracted divisor without assuming n is prime.

Step identifiers and dependencies

Rule: upf_factorization_remaining_product_invariant · Uses: G001, S245

S247 · calculation

Before

upf extract divisor2 occurrence0 := div(10, 2)

After

upf extract divisor2 occurrence0 = 5

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S246

S248 · implies

Before

next divisor=2;previous remaining=10;all smaller divisors exhausted

After

extracted multiplicity=1;next remaining=5;remaining modulo2=1;extracted multiset=[2]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S247

S249 · calculation

Before

upf canonical complete product factor0 := mul(1, 2)

After

upf canonical complete product factor0 = 2

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S248

S250 · calculation

Before

upf canonical complete product factor1 := mul(2, 5)

After

upf canonical complete product factor1 = 10

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S249

S251 · implies

Before

exhausted trial divisors below3;terminal remaining=5;d*d>remaining;ORIGINAL n=10

After

complete increasing prime multiset=[2, 5];full product=10;a composite terminal remainder would have an already tested smaller divisor

Conditions: none

Step identifiers and dependencies

Rule: upf_final_prime_remainder_complete_existence_instance · Uses: G001, S250

S252 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor10:input=10;COMPLETE prime multiset=[2, 5];distinct primes=[2, 5]

After

mu=1;empty product case=No;repeated prime=No

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S251

S253 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor10 := div(240, 10)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor10 = 24

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S252

S254 · implies

Before

Mobius inversion ORIGINAL inverse F(n/10):actual positive input=24;check complete integer range1..24

After

ALL positive divisors INCREASING=[1, 2, 3, 4, 6, 8, 12, 24];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S253

S255 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/10) f(1) ORIGINAL a times divisor := mul(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/10) f(1) ORIGINAL a times divisor = 14

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S254

S256 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/10) f(1) plus ORIGINAL b := sum(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/10) f(1) plus ORIGINAL b = 15

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S255

S257 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/10) f(2) ORIGINAL a times divisor := mul(14, 2)

After

Mobius inversion ORIGINAL inverse F(n/10) f(2) ORIGINAL a times divisor = 28

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S256

S258 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/10) f(2) plus ORIGINAL b := sum(28, 1)

After

Mobius inversion ORIGINAL inverse F(n/10) f(2) plus ORIGINAL b = 29

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S257

S259 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/10) f(3) ORIGINAL a times divisor := mul(14, 3)

After

Mobius inversion ORIGINAL inverse F(n/10) f(3) ORIGINAL a times divisor = 42

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S258

S260 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/10) f(3) plus ORIGINAL b := sum(42, 1)

After

Mobius inversion ORIGINAL inverse F(n/10) f(3) plus ORIGINAL b = 43

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S259

S261 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/10) f(4) ORIGINAL a times divisor := mul(14, 4)

After

Mobius inversion ORIGINAL inverse F(n/10) f(4) ORIGINAL a times divisor = 56

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S260

S262 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/10) f(4) plus ORIGINAL b := sum(56, 1)

After

Mobius inversion ORIGINAL inverse F(n/10) f(4) plus ORIGINAL b = 57

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S261

S263 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/10) f(6) ORIGINAL a times divisor := mul(14, 6)

After

Mobius inversion ORIGINAL inverse F(n/10) f(6) ORIGINAL a times divisor = 84

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S262

S264 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/10) f(6) plus ORIGINAL b := sum(84, 1)

After

Mobius inversion ORIGINAL inverse F(n/10) f(6) plus ORIGINAL b = 85

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S263

S265 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/10) f(8) ORIGINAL a times divisor := mul(14, 8)

After

Mobius inversion ORIGINAL inverse F(n/10) f(8) ORIGINAL a times divisor = 112

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S264

S266 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/10) f(8) plus ORIGINAL b := sum(112, 1)

After

Mobius inversion ORIGINAL inverse F(n/10) f(8) plus ORIGINAL b = 113

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S265

S267 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/10) f(12) ORIGINAL a times divisor := mul(14, 12)

After

Mobius inversion ORIGINAL inverse F(n/10) f(12) ORIGINAL a times divisor = 168

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S266

S268 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/10) f(12) plus ORIGINAL b := sum(168, 1)

After

Mobius inversion ORIGINAL inverse F(n/10) f(12) plus ORIGINAL b = 169

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S267

S269 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/10) f(24) ORIGINAL a times divisor := mul(14, 24)

After

Mobius inversion ORIGINAL inverse F(n/10) f(24) ORIGINAL a times divisor = 336

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S268

S270 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/10) f(24) plus ORIGINAL b := sum(336, 1)

After

Mobius inversion ORIGINAL inverse F(n/10) f(24) plus ORIGINAL b = 337

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S269

S271 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/10) full forward divisor sum := sum(15, 29, 43, 57, 85, 113, 169, 337)

After

Mobius inversion ORIGINAL inverse F(n/10) full forward divisor sum = 848

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S270

S272 · calculation

Before

Mobius inversion ORIGINAL inverse mu(10) times SAME F(n/10) := mul(1, 848)

After

Mobius inversion ORIGINAL inverse mu(10) times SAME F(n/10) = 848

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S271

S273 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor12:actual positive input for mu=12

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S272

S274 · implies

Before

ORIGINAL positive integer absolute magnitude=12>1

After

initialize remaining=n,prime multiset empty;invariant product(extracted)*remaining=n;every smaller trial divisor has been exhausted

Conditions: none

Divide only by an actual divisor and exhaust smaller candidates,which justifies primality of each extracted divisor without assuming n is prime.

Step identifiers and dependencies

Rule: upf_factorization_remaining_product_invariant · Uses: G001, S273

S275 · calculation

Before

upf extract divisor2 occurrence0 := div(12, 2)

After

upf extract divisor2 occurrence0 = 6

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S274

S276 · calculation

Before

upf extract divisor2 occurrence1 := div(6, 2)

After

upf extract divisor2 occurrence1 = 3

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S275

S277 · implies

Before

next divisor=2;previous remaining=12;all smaller divisors exhausted

After

extracted multiplicity=2;next remaining=3;remaining modulo2=1;extracted multiset=[2, 2]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S276

S278 · calculation

Before

upf canonical complete product factor0 := mul(1, 2)

After

upf canonical complete product factor0 = 2

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S277

S279 · calculation

Before

upf canonical complete product factor1 := mul(2, 2)

After

upf canonical complete product factor1 = 4

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S278

S280 · calculation

Before

upf canonical complete product factor2 := mul(4, 3)

After

upf canonical complete product factor2 = 12

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S279

S281 · implies

Before

exhausted trial divisors below3;terminal remaining=3;d*d>remaining;ORIGINAL n=12

After

complete increasing prime multiset=[2, 2, 3];full product=12;a composite terminal remainder would have an already tested smaller divisor

Conditions: none

Step identifiers and dependencies

Rule: upf_final_prime_remainder_complete_existence_instance · Uses: G001, S280

S282 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor12:input=12;COMPLETE prime multiset=[2, 2, 3];distinct primes=[2, 3]

After

mu=0;empty product case=No;repeated prime=Yes

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S281

S283 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor12 := div(240, 12)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor12 = 20

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S282

S284 · implies

Before

Mobius inversion ORIGINAL inverse F(n/12):actual positive input=20;check complete integer range1..20

After

ALL positive divisors INCREASING=[1, 2, 4, 5, 10, 20];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S283

S285 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/12) f(1) ORIGINAL a times divisor := mul(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/12) f(1) ORIGINAL a times divisor = 14

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S284

S286 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/12) f(1) plus ORIGINAL b := sum(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/12) f(1) plus ORIGINAL b = 15

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S285

S287 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/12) f(2) ORIGINAL a times divisor := mul(14, 2)

After

Mobius inversion ORIGINAL inverse F(n/12) f(2) ORIGINAL a times divisor = 28

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S286

S288 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/12) f(2) plus ORIGINAL b := sum(28, 1)

After

Mobius inversion ORIGINAL inverse F(n/12) f(2) plus ORIGINAL b = 29

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S287

S289 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/12) f(4) ORIGINAL a times divisor := mul(14, 4)

After

Mobius inversion ORIGINAL inverse F(n/12) f(4) ORIGINAL a times divisor = 56

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S288

S290 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/12) f(4) plus ORIGINAL b := sum(56, 1)

After

Mobius inversion ORIGINAL inverse F(n/12) f(4) plus ORIGINAL b = 57

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S289

S291 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/12) f(5) ORIGINAL a times divisor := mul(14, 5)

After

Mobius inversion ORIGINAL inverse F(n/12) f(5) ORIGINAL a times divisor = 70

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S290

S292 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/12) f(5) plus ORIGINAL b := sum(70, 1)

After

Mobius inversion ORIGINAL inverse F(n/12) f(5) plus ORIGINAL b = 71

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S291

S293 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/12) f(10) ORIGINAL a times divisor := mul(14, 10)

After

Mobius inversion ORIGINAL inverse F(n/12) f(10) ORIGINAL a times divisor = 140

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S292

S294 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/12) f(10) plus ORIGINAL b := sum(140, 1)

After

Mobius inversion ORIGINAL inverse F(n/12) f(10) plus ORIGINAL b = 141

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S293

S295 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/12) f(20) ORIGINAL a times divisor := mul(14, 20)

After

Mobius inversion ORIGINAL inverse F(n/12) f(20) ORIGINAL a times divisor = 280

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S294

S296 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/12) f(20) plus ORIGINAL b := sum(280, 1)

After

Mobius inversion ORIGINAL inverse F(n/12) f(20) plus ORIGINAL b = 281

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S295

S297 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/12) full forward divisor sum := sum(15, 29, 57, 71, 141, 281)

After

Mobius inversion ORIGINAL inverse F(n/12) full forward divisor sum = 594

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S296

S298 · calculation

Before

Mobius inversion ORIGINAL inverse mu(12) times SAME F(n/12) := mul(0, 594)

After

Mobius inversion ORIGINAL inverse mu(12) times SAME F(n/12) = 0

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S297

S299 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor15:actual positive input for mu=15

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S298

S300 · implies

Before

ORIGINAL positive integer absolute magnitude=15>1

After

initialize remaining=n,prime multiset empty;invariant product(extracted)*remaining=n;every smaller trial divisor has been exhausted

Conditions: none

Divide only by an actual divisor and exhaust smaller candidates,which justifies primality of each extracted divisor without assuming n is prime.

Step identifiers and dependencies

Rule: upf_factorization_remaining_product_invariant · Uses: G001, S299

S301 · implies

Before

next divisor=2;previous remaining=15;all smaller divisors exhausted

After

extracted multiplicity=0;next remaining=15;remaining modulo2=1;extracted multiset=[]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S300

S302 · calculation

Before

upf extract divisor3 occurrence0 := div(15, 3)

After

upf extract divisor3 occurrence0 = 5

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S301

S303 · implies

Before

next divisor=3;previous remaining=15;all smaller divisors exhausted

After

extracted multiplicity=1;next remaining=5;remaining modulo3=2;extracted multiset=[3]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S302

S304 · calculation

Before

upf canonical complete product factor0 := mul(1, 3)

After

upf canonical complete product factor0 = 3

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S303

S305 · calculation

Before

upf canonical complete product factor1 := mul(3, 5)

After

upf canonical complete product factor1 = 15

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S304

S306 · implies

Before

exhausted trial divisors below4;terminal remaining=5;d*d>remaining;ORIGINAL n=15

After

complete increasing prime multiset=[3, 5];full product=15;a composite terminal remainder would have an already tested smaller divisor

Conditions: none

Step identifiers and dependencies

Rule: upf_final_prime_remainder_complete_existence_instance · Uses: G001, S305

S307 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor15:input=15;COMPLETE prime multiset=[3, 5];distinct primes=[3, 5]

After

mu=1;empty product case=No;repeated prime=No

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S306

S308 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor15 := div(240, 15)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor15 = 16

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S307

S309 · implies

Before

Mobius inversion ORIGINAL inverse F(n/15):actual positive input=16;check complete integer range1..16

After

ALL positive divisors INCREASING=[1, 2, 4, 8, 16];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S308

S310 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/15) f(1) ORIGINAL a times divisor := mul(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/15) f(1) ORIGINAL a times divisor = 14

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S309

S311 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/15) f(1) plus ORIGINAL b := sum(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/15) f(1) plus ORIGINAL b = 15

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S310

S312 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/15) f(2) ORIGINAL a times divisor := mul(14, 2)

After

Mobius inversion ORIGINAL inverse F(n/15) f(2) ORIGINAL a times divisor = 28

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S311

S313 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/15) f(2) plus ORIGINAL b := sum(28, 1)

After

Mobius inversion ORIGINAL inverse F(n/15) f(2) plus ORIGINAL b = 29

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S312

S314 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/15) f(4) ORIGINAL a times divisor := mul(14, 4)

After

Mobius inversion ORIGINAL inverse F(n/15) f(4) ORIGINAL a times divisor = 56

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S313

S315 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/15) f(4) plus ORIGINAL b := sum(56, 1)

After

Mobius inversion ORIGINAL inverse F(n/15) f(4) plus ORIGINAL b = 57

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S314

S316 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/15) f(8) ORIGINAL a times divisor := mul(14, 8)

After

Mobius inversion ORIGINAL inverse F(n/15) f(8) ORIGINAL a times divisor = 112

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S315

S317 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/15) f(8) plus ORIGINAL b := sum(112, 1)

After

Mobius inversion ORIGINAL inverse F(n/15) f(8) plus ORIGINAL b = 113

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S316

S318 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/15) f(16) ORIGINAL a times divisor := mul(14, 16)

After

Mobius inversion ORIGINAL inverse F(n/15) f(16) ORIGINAL a times divisor = 224

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S317

S319 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/15) f(16) plus ORIGINAL b := sum(224, 1)

After

Mobius inversion ORIGINAL inverse F(n/15) f(16) plus ORIGINAL b = 225

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S318

S320 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/15) full forward divisor sum := sum(15, 29, 57, 113, 225)

After

Mobius inversion ORIGINAL inverse F(n/15) full forward divisor sum = 439

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S319

S321 · calculation

Before

Mobius inversion ORIGINAL inverse mu(15) times SAME F(n/15) := mul(1, 439)

After

Mobius inversion ORIGINAL inverse mu(15) times SAME F(n/15) = 439

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S320

S322 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor16:actual positive input for mu=16

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S321

S323 · implies

Before

ORIGINAL positive integer absolute magnitude=16>1

After

initialize remaining=n,prime multiset empty;invariant product(extracted)*remaining=n;every smaller trial divisor has been exhausted

Conditions: none

Divide only by an actual divisor and exhaust smaller candidates,which justifies primality of each extracted divisor without assuming n is prime.

Step identifiers and dependencies

Rule: upf_factorization_remaining_product_invariant · Uses: G001, S322

S324 · calculation

Before

upf extract divisor2 occurrence0 := div(16, 2)

After

upf extract divisor2 occurrence0 = 8

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S323

S325 · calculation

Before

upf extract divisor2 occurrence1 := div(8, 2)

After

upf extract divisor2 occurrence1 = 4

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S324

S326 · calculation

Before

upf extract divisor2 occurrence2 := div(4, 2)

After

upf extract divisor2 occurrence2 = 2

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S325

S327 · calculation

Before

upf extract divisor2 occurrence3 := div(2, 2)

After

upf extract divisor2 occurrence3 = 1

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S326

S328 · implies

Before

next divisor=2;previous remaining=16;all smaller divisors exhausted

After

extracted multiplicity=4;next remaining=1;remaining modulo2=1;extracted multiset=[2, 2, 2, 2]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S327

S329 · calculation

Before

upf canonical complete product factor0 := mul(1, 2)

After

upf canonical complete product factor0 = 2

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S328

S330 · calculation

Before

upf canonical complete product factor1 := mul(2, 2)

After

upf canonical complete product factor1 = 4

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S329

S331 · calculation

Before

upf canonical complete product factor2 := mul(4, 2)

After

upf canonical complete product factor2 = 8

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S330

S332 · calculation

Before

upf canonical complete product factor3 := mul(8, 2)

After

upf canonical complete product factor3 = 16

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S331

S333 · implies

Before

exhausted trial divisors below3;terminal remaining=1;d*d>remaining;ORIGINAL n=16

After

complete increasing prime multiset=[2, 2, 2, 2];full product=16;a composite terminal remainder would have an already tested smaller divisor

Conditions: none

Step identifiers and dependencies

Rule: upf_final_prime_remainder_complete_existence_instance · Uses: G001, S332

S334 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor16:input=16;COMPLETE prime multiset=[2, 2, 2, 2];distinct primes=[2]

After

mu=0;empty product case=No;repeated prime=Yes

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S333

S335 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor16 := div(240, 16)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor16 = 15

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S334

S336 · implies

Before

Mobius inversion ORIGINAL inverse F(n/16):actual positive input=15;check complete integer range1..15

After

ALL positive divisors INCREASING=[1, 3, 5, 15];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S335

S337 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/16) f(1) ORIGINAL a times divisor := mul(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/16) f(1) ORIGINAL a times divisor = 14

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S336

S338 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/16) f(1) plus ORIGINAL b := sum(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/16) f(1) plus ORIGINAL b = 15

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S337

S339 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/16) f(3) ORIGINAL a times divisor := mul(14, 3)

After

Mobius inversion ORIGINAL inverse F(n/16) f(3) ORIGINAL a times divisor = 42

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S338

S340 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/16) f(3) plus ORIGINAL b := sum(42, 1)

After

Mobius inversion ORIGINAL inverse F(n/16) f(3) plus ORIGINAL b = 43

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S339

S341 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/16) f(5) ORIGINAL a times divisor := mul(14, 5)

After

Mobius inversion ORIGINAL inverse F(n/16) f(5) ORIGINAL a times divisor = 70

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S340

S342 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/16) f(5) plus ORIGINAL b := sum(70, 1)

After

Mobius inversion ORIGINAL inverse F(n/16) f(5) plus ORIGINAL b = 71

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S341

S343 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/16) f(15) ORIGINAL a times divisor := mul(14, 15)

After

Mobius inversion ORIGINAL inverse F(n/16) f(15) ORIGINAL a times divisor = 210

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S342

S344 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/16) f(15) plus ORIGINAL b := sum(210, 1)

After

Mobius inversion ORIGINAL inverse F(n/16) f(15) plus ORIGINAL b = 211

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S343

S345 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/16) full forward divisor sum := sum(15, 43, 71, 211)

After

Mobius inversion ORIGINAL inverse F(n/16) full forward divisor sum = 340

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S344

S346 · calculation

Before

Mobius inversion ORIGINAL inverse mu(16) times SAME F(n/16) := mul(0, 340)

After

Mobius inversion ORIGINAL inverse mu(16) times SAME F(n/16) = 0

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S345

S347 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor20:actual positive input for mu=20

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S346

S348 · implies

Before

ORIGINAL positive integer absolute magnitude=20>1

After

initialize remaining=n,prime multiset empty;invariant product(extracted)*remaining=n;every smaller trial divisor has been exhausted

Conditions: none

Divide only by an actual divisor and exhaust smaller candidates,which justifies primality of each extracted divisor without assuming n is prime.

Step identifiers and dependencies

Rule: upf_factorization_remaining_product_invariant · Uses: G001, S347

S349 · calculation

Before

upf extract divisor2 occurrence0 := div(20, 2)

After

upf extract divisor2 occurrence0 = 10

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S348

S350 · calculation

Before

upf extract divisor2 occurrence1 := div(10, 2)

After

upf extract divisor2 occurrence1 = 5

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S349

S351 · implies

Before

next divisor=2;previous remaining=20;all smaller divisors exhausted

After

extracted multiplicity=2;next remaining=5;remaining modulo2=1;extracted multiset=[2, 2]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S350

S352 · calculation

Before

upf canonical complete product factor0 := mul(1, 2)

After

upf canonical complete product factor0 = 2

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S351

S353 · calculation

Before

upf canonical complete product factor1 := mul(2, 2)

After

upf canonical complete product factor1 = 4

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S352

S354 · calculation

Before

upf canonical complete product factor2 := mul(4, 5)

After

upf canonical complete product factor2 = 20

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S353

S355 · implies

Before

exhausted trial divisors below3;terminal remaining=5;d*d>remaining;ORIGINAL n=20

After

complete increasing prime multiset=[2, 2, 5];full product=20;a composite terminal remainder would have an already tested smaller divisor

Conditions: none

Step identifiers and dependencies

Rule: upf_final_prime_remainder_complete_existence_instance · Uses: G001, S354

S356 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor20:input=20;COMPLETE prime multiset=[2, 2, 5];distinct primes=[2, 5]

After

mu=0;empty product case=No;repeated prime=Yes

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S355

S357 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor20 := div(240, 20)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor20 = 12

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S356

S358 · implies

Before

Mobius inversion ORIGINAL inverse F(n/20):actual positive input=12;check complete integer range1..12

After

ALL positive divisors INCREASING=[1, 2, 3, 4, 6, 12];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S357

S359 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/20) f(1) ORIGINAL a times divisor := mul(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/20) f(1) ORIGINAL a times divisor = 14

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S358

S360 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/20) f(1) plus ORIGINAL b := sum(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/20) f(1) plus ORIGINAL b = 15

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S359

S361 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/20) f(2) ORIGINAL a times divisor := mul(14, 2)

After

Mobius inversion ORIGINAL inverse F(n/20) f(2) ORIGINAL a times divisor = 28

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S360

S362 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/20) f(2) plus ORIGINAL b := sum(28, 1)

After

Mobius inversion ORIGINAL inverse F(n/20) f(2) plus ORIGINAL b = 29

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S361

S363 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/20) f(3) ORIGINAL a times divisor := mul(14, 3)

After

Mobius inversion ORIGINAL inverse F(n/20) f(3) ORIGINAL a times divisor = 42

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S362

S364 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/20) f(3) plus ORIGINAL b := sum(42, 1)

After

Mobius inversion ORIGINAL inverse F(n/20) f(3) plus ORIGINAL b = 43

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S363

S365 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/20) f(4) ORIGINAL a times divisor := mul(14, 4)

After

Mobius inversion ORIGINAL inverse F(n/20) f(4) ORIGINAL a times divisor = 56

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S364

S366 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/20) f(4) plus ORIGINAL b := sum(56, 1)

After

Mobius inversion ORIGINAL inverse F(n/20) f(4) plus ORIGINAL b = 57

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S365

S367 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/20) f(6) ORIGINAL a times divisor := mul(14, 6)

After

Mobius inversion ORIGINAL inverse F(n/20) f(6) ORIGINAL a times divisor = 84

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S366

S368 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/20) f(6) plus ORIGINAL b := sum(84, 1)

After

Mobius inversion ORIGINAL inverse F(n/20) f(6) plus ORIGINAL b = 85

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S367

S369 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/20) f(12) ORIGINAL a times divisor := mul(14, 12)

After

Mobius inversion ORIGINAL inverse F(n/20) f(12) ORIGINAL a times divisor = 168

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S368

S370 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/20) f(12) plus ORIGINAL b := sum(168, 1)

After

Mobius inversion ORIGINAL inverse F(n/20) f(12) plus ORIGINAL b = 169

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S369

S371 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/20) full forward divisor sum := sum(15, 29, 43, 57, 85, 169)

After

Mobius inversion ORIGINAL inverse F(n/20) full forward divisor sum = 398

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S370

S372 · calculation

Before

Mobius inversion ORIGINAL inverse mu(20) times SAME F(n/20) := mul(0, 398)

After

Mobius inversion ORIGINAL inverse mu(20) times SAME F(n/20) = 0

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S371

S373 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor24:actual positive input for mu=24

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S372

S374 · implies

Before

ORIGINAL positive integer absolute magnitude=24>1

After

initialize remaining=n,prime multiset empty;invariant product(extracted)*remaining=n;every smaller trial divisor has been exhausted

Conditions: none

Divide only by an actual divisor and exhaust smaller candidates,which justifies primality of each extracted divisor without assuming n is prime.

Step identifiers and dependencies

Rule: upf_factorization_remaining_product_invariant · Uses: G001, S373

S375 · calculation

Before

upf extract divisor2 occurrence0 := div(24, 2)

After

upf extract divisor2 occurrence0 = 12

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S374

S376 · calculation

Before

upf extract divisor2 occurrence1 := div(12, 2)

After

upf extract divisor2 occurrence1 = 6

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S375

S377 · calculation

Before

upf extract divisor2 occurrence2 := div(6, 2)

After

upf extract divisor2 occurrence2 = 3

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S376

S378 · implies

Before

next divisor=2;previous remaining=24;all smaller divisors exhausted

After

extracted multiplicity=3;next remaining=3;remaining modulo2=1;extracted multiset=[2, 2, 2]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S377

S379 · calculation

Before

upf canonical complete product factor0 := mul(1, 2)

After

upf canonical complete product factor0 = 2

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S378

S380 · calculation

Before

upf canonical complete product factor1 := mul(2, 2)

After

upf canonical complete product factor1 = 4

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S379

S381 · calculation

Before

upf canonical complete product factor2 := mul(4, 2)

After

upf canonical complete product factor2 = 8

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S380

S382 · calculation

Before

upf canonical complete product factor3 := mul(8, 3)

After

upf canonical complete product factor3 = 24

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S381

S383 · implies

Before

exhausted trial divisors below3;terminal remaining=3;d*d>remaining;ORIGINAL n=24

After

complete increasing prime multiset=[2, 2, 2, 3];full product=24;a composite terminal remainder would have an already tested smaller divisor

Conditions: none

Step identifiers and dependencies

Rule: upf_final_prime_remainder_complete_existence_instance · Uses: G001, S382

S384 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor24:input=24;COMPLETE prime multiset=[2, 2, 2, 3];distinct primes=[2, 3]

After

mu=0;empty product case=No;repeated prime=Yes

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S383

S385 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor24 := div(240, 24)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor24 = 10

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S384

S386 · implies

Before

Mobius inversion ORIGINAL inverse F(n/24):actual positive input=10;check complete integer range1..10

After

ALL positive divisors INCREASING=[1, 2, 5, 10];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S385

S387 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/24) f(1) ORIGINAL a times divisor := mul(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/24) f(1) ORIGINAL a times divisor = 14

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S386

S388 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/24) f(1) plus ORIGINAL b := sum(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/24) f(1) plus ORIGINAL b = 15

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S387

S389 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/24) f(2) ORIGINAL a times divisor := mul(14, 2)

After

Mobius inversion ORIGINAL inverse F(n/24) f(2) ORIGINAL a times divisor = 28

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S388

S390 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/24) f(2) plus ORIGINAL b := sum(28, 1)

After

Mobius inversion ORIGINAL inverse F(n/24) f(2) plus ORIGINAL b = 29

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S389

S391 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/24) f(5) ORIGINAL a times divisor := mul(14, 5)

After

Mobius inversion ORIGINAL inverse F(n/24) f(5) ORIGINAL a times divisor = 70

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S390

S392 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/24) f(5) plus ORIGINAL b := sum(70, 1)

After

Mobius inversion ORIGINAL inverse F(n/24) f(5) plus ORIGINAL b = 71

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S391

S393 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/24) f(10) ORIGINAL a times divisor := mul(14, 10)

After

Mobius inversion ORIGINAL inverse F(n/24) f(10) ORIGINAL a times divisor = 140

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S392

S394 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/24) f(10) plus ORIGINAL b := sum(140, 1)

After

Mobius inversion ORIGINAL inverse F(n/24) f(10) plus ORIGINAL b = 141

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S393

S395 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/24) full forward divisor sum := sum(15, 29, 71, 141)

After

Mobius inversion ORIGINAL inverse F(n/24) full forward divisor sum = 256

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S394

S396 · calculation

Before

Mobius inversion ORIGINAL inverse mu(24) times SAME F(n/24) := mul(0, 256)

After

Mobius inversion ORIGINAL inverse mu(24) times SAME F(n/24) = 0

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S395

S397 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor30:actual positive input for mu=30

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S396

S398 · implies

Before

ORIGINAL positive integer absolute magnitude=30>1

After

initialize remaining=n,prime multiset empty;invariant product(extracted)*remaining=n;every smaller trial divisor has been exhausted

Conditions: none

Divide only by an actual divisor and exhaust smaller candidates,which justifies primality of each extracted divisor without assuming n is prime.

Step identifiers and dependencies

Rule: upf_factorization_remaining_product_invariant · Uses: G001, S397

S399 · calculation

Before

upf extract divisor2 occurrence0 := div(30, 2)

After

upf extract divisor2 occurrence0 = 15

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S398

S400 · implies

Before

next divisor=2;previous remaining=30;all smaller divisors exhausted

After

extracted multiplicity=1;next remaining=15;remaining modulo2=1;extracted multiset=[2]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S399

S401 · calculation

Before

upf extract divisor3 occurrence1 := div(15, 3)

After

upf extract divisor3 occurrence1 = 5

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S400

S402 · implies

Before

next divisor=3;previous remaining=15;all smaller divisors exhausted

After

extracted multiplicity=1;next remaining=5;remaining modulo3=2;extracted multiset=[2, 3]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S401

S403 · calculation

Before

upf canonical complete product factor0 := mul(1, 2)

After

upf canonical complete product factor0 = 2

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S402

S404 · calculation

Before

upf canonical complete product factor1 := mul(2, 3)

After

upf canonical complete product factor1 = 6

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S403

S405 · calculation

Before

upf canonical complete product factor2 := mul(6, 5)

After

upf canonical complete product factor2 = 30

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S404

S406 · implies

Before

exhausted trial divisors below4;terminal remaining=5;d*d>remaining;ORIGINAL n=30

After

complete increasing prime multiset=[2, 3, 5];full product=30;a composite terminal remainder would have an already tested smaller divisor

Conditions: none

Step identifiers and dependencies

Rule: upf_final_prime_remainder_complete_existence_instance · Uses: G001, S405

S407 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor30:input=30;COMPLETE prime multiset=[2, 3, 5];distinct primes=[2, 3, 5]

After

mu=-1;empty product case=No;repeated prime=No

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S406

S408 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor30 := div(240, 30)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor30 = 8

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S407

S409 · implies

Before

Mobius inversion ORIGINAL inverse F(n/30):actual positive input=8;check complete integer range1..8

After

ALL positive divisors INCREASING=[1, 2, 4, 8];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S408

S410 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/30) f(1) ORIGINAL a times divisor := mul(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/30) f(1) ORIGINAL a times divisor = 14

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S409

S411 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/30) f(1) plus ORIGINAL b := sum(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/30) f(1) plus ORIGINAL b = 15

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S410

S412 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/30) f(2) ORIGINAL a times divisor := mul(14, 2)

After

Mobius inversion ORIGINAL inverse F(n/30) f(2) ORIGINAL a times divisor = 28

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S411

S413 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/30) f(2) plus ORIGINAL b := sum(28, 1)

After

Mobius inversion ORIGINAL inverse F(n/30) f(2) plus ORIGINAL b = 29

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S412

S414 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/30) f(4) ORIGINAL a times divisor := mul(14, 4)

After

Mobius inversion ORIGINAL inverse F(n/30) f(4) ORIGINAL a times divisor = 56

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S413

S415 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/30) f(4) plus ORIGINAL b := sum(56, 1)

After

Mobius inversion ORIGINAL inverse F(n/30) f(4) plus ORIGINAL b = 57

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S414

S416 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/30) f(8) ORIGINAL a times divisor := mul(14, 8)

After

Mobius inversion ORIGINAL inverse F(n/30) f(8) ORIGINAL a times divisor = 112

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S415

S417 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/30) f(8) plus ORIGINAL b := sum(112, 1)

After

Mobius inversion ORIGINAL inverse F(n/30) f(8) plus ORIGINAL b = 113

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S416

S418 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/30) full forward divisor sum := sum(15, 29, 57, 113)

After

Mobius inversion ORIGINAL inverse F(n/30) full forward divisor sum = 214

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S417

S419 · calculation

Before

Mobius inversion ORIGINAL inverse mu(30) times SAME F(n/30) := mul(-1, 214)

After

Mobius inversion ORIGINAL inverse mu(30) times SAME F(n/30) = -214

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S418

S420 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor40:actual positive input for mu=40

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S419

S421 · implies

Before

ORIGINAL positive integer absolute magnitude=40>1

After

initialize remaining=n,prime multiset empty;invariant product(extracted)*remaining=n;every smaller trial divisor has been exhausted

Conditions: none

Divide only by an actual divisor and exhaust smaller candidates,which justifies primality of each extracted divisor without assuming n is prime.

Step identifiers and dependencies

Rule: upf_factorization_remaining_product_invariant · Uses: G001, S420

S422 · calculation

Before

upf extract divisor2 occurrence0 := div(40, 2)

After

upf extract divisor2 occurrence0 = 20

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S421

S423 · calculation

Before

upf extract divisor2 occurrence1 := div(20, 2)

After

upf extract divisor2 occurrence1 = 10

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S422

S424 · calculation

Before

upf extract divisor2 occurrence2 := div(10, 2)

After

upf extract divisor2 occurrence2 = 5

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S423

S425 · implies

Before

next divisor=2;previous remaining=40;all smaller divisors exhausted

After

extracted multiplicity=3;next remaining=5;remaining modulo2=1;extracted multiset=[2, 2, 2]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S424

S426 · calculation

Before

upf canonical complete product factor0 := mul(1, 2)

After

upf canonical complete product factor0 = 2

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S425

S427 · calculation

Before

upf canonical complete product factor1 := mul(2, 2)

After

upf canonical complete product factor1 = 4

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S426

S428 · calculation

Before

upf canonical complete product factor2 := mul(4, 2)

After

upf canonical complete product factor2 = 8

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S427

S429 · calculation

Before

upf canonical complete product factor3 := mul(8, 5)

After

upf canonical complete product factor3 = 40

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S428

S430 · implies

Before

exhausted trial divisors below3;terminal remaining=5;d*d>remaining;ORIGINAL n=40

After

complete increasing prime multiset=[2, 2, 2, 5];full product=40;a composite terminal remainder would have an already tested smaller divisor

Conditions: none

Step identifiers and dependencies

Rule: upf_final_prime_remainder_complete_existence_instance · Uses: G001, S429

S431 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor40:input=40;COMPLETE prime multiset=[2, 2, 2, 5];distinct primes=[2, 5]

After

mu=0;empty product case=No;repeated prime=Yes

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S430

S432 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor40 := div(240, 40)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor40 = 6

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S431

S433 · implies

Before

Mobius inversion ORIGINAL inverse F(n/40):actual positive input=6;check complete integer range1..6

After

ALL positive divisors INCREASING=[1, 2, 3, 6];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S432

S434 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/40) f(1) ORIGINAL a times divisor := mul(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/40) f(1) ORIGINAL a times divisor = 14

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S433

S435 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/40) f(1) plus ORIGINAL b := sum(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/40) f(1) plus ORIGINAL b = 15

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S434

S436 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/40) f(2) ORIGINAL a times divisor := mul(14, 2)

After

Mobius inversion ORIGINAL inverse F(n/40) f(2) ORIGINAL a times divisor = 28

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S435

S437 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/40) f(2) plus ORIGINAL b := sum(28, 1)

After

Mobius inversion ORIGINAL inverse F(n/40) f(2) plus ORIGINAL b = 29

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S436

S438 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/40) f(3) ORIGINAL a times divisor := mul(14, 3)

After

Mobius inversion ORIGINAL inverse F(n/40) f(3) ORIGINAL a times divisor = 42

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S437

S439 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/40) f(3) plus ORIGINAL b := sum(42, 1)

After

Mobius inversion ORIGINAL inverse F(n/40) f(3) plus ORIGINAL b = 43

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S438

S440 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/40) f(6) ORIGINAL a times divisor := mul(14, 6)

After

Mobius inversion ORIGINAL inverse F(n/40) f(6) ORIGINAL a times divisor = 84

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S439

S441 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/40) f(6) plus ORIGINAL b := sum(84, 1)

After

Mobius inversion ORIGINAL inverse F(n/40) f(6) plus ORIGINAL b = 85

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S440

S442 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/40) full forward divisor sum := sum(15, 29, 43, 85)

After

Mobius inversion ORIGINAL inverse F(n/40) full forward divisor sum = 172

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S441

S443 · calculation

Before

Mobius inversion ORIGINAL inverse mu(40) times SAME F(n/40) := mul(0, 172)

After

Mobius inversion ORIGINAL inverse mu(40) times SAME F(n/40) = 0

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S442

S444 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor48:actual positive input for mu=48

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S443

S445 · implies

Before

ORIGINAL positive integer absolute magnitude=48>1

After

initialize remaining=n,prime multiset empty;invariant product(extracted)*remaining=n;every smaller trial divisor has been exhausted

Conditions: none

Divide only by an actual divisor and exhaust smaller candidates,which justifies primality of each extracted divisor without assuming n is prime.

Step identifiers and dependencies

Rule: upf_factorization_remaining_product_invariant · Uses: G001, S444

S446 · calculation

Before

upf extract divisor2 occurrence0 := div(48, 2)

After

upf extract divisor2 occurrence0 = 24

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S445

S447 · calculation

Before

upf extract divisor2 occurrence1 := div(24, 2)

After

upf extract divisor2 occurrence1 = 12

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S446

S448 · calculation

Before

upf extract divisor2 occurrence2 := div(12, 2)

After

upf extract divisor2 occurrence2 = 6

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S447

S449 · calculation

Before

upf extract divisor2 occurrence3 := div(6, 2)

After

upf extract divisor2 occurrence3 = 3

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S448

S450 · implies

Before

next divisor=2;previous remaining=48;all smaller divisors exhausted

After

extracted multiplicity=4;next remaining=3;remaining modulo2=1;extracted multiset=[2, 2, 2, 2]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S449

S451 · calculation

Before

upf canonical complete product factor0 := mul(1, 2)

After

upf canonical complete product factor0 = 2

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S450

S452 · calculation

Before

upf canonical complete product factor1 := mul(2, 2)

After

upf canonical complete product factor1 = 4

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S451

S453 · calculation

Before

upf canonical complete product factor2 := mul(4, 2)

After

upf canonical complete product factor2 = 8

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S452

S454 · calculation

Before

upf canonical complete product factor3 := mul(8, 2)

After

upf canonical complete product factor3 = 16

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S453

S455 · calculation

Before

upf canonical complete product factor4 := mul(16, 3)

After

upf canonical complete product factor4 = 48

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S454

S456 · implies

Before

exhausted trial divisors below3;terminal remaining=3;d*d>remaining;ORIGINAL n=48

After

complete increasing prime multiset=[2, 2, 2, 2, 3];full product=48;a composite terminal remainder would have an already tested smaller divisor

Conditions: none

Step identifiers and dependencies

Rule: upf_final_prime_remainder_complete_existence_instance · Uses: G001, S455

S457 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor48:input=48;COMPLETE prime multiset=[2, 2, 2, 2, 3];distinct primes=[2, 3]

After

mu=0;empty product case=No;repeated prime=Yes

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S456

S458 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor48 := div(240, 48)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor48 = 5

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S457

S459 · implies

Before

Mobius inversion ORIGINAL inverse F(n/48):actual positive input=5;check complete integer range1..5

After

ALL positive divisors INCREASING=[1, 5];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S458

S460 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/48) f(1) ORIGINAL a times divisor := mul(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/48) f(1) ORIGINAL a times divisor = 14

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S459

S461 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/48) f(1) plus ORIGINAL b := sum(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/48) f(1) plus ORIGINAL b = 15

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S460

S462 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/48) f(5) ORIGINAL a times divisor := mul(14, 5)

After

Mobius inversion ORIGINAL inverse F(n/48) f(5) ORIGINAL a times divisor = 70

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S461

S463 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/48) f(5) plus ORIGINAL b := sum(70, 1)

After

Mobius inversion ORIGINAL inverse F(n/48) f(5) plus ORIGINAL b = 71

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S462

S464 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/48) full forward divisor sum := sum(15, 71)

After

Mobius inversion ORIGINAL inverse F(n/48) full forward divisor sum = 86

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S463

S465 · calculation

Before

Mobius inversion ORIGINAL inverse mu(48) times SAME F(n/48) := mul(0, 86)

After

Mobius inversion ORIGINAL inverse mu(48) times SAME F(n/48) = 0

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S464

S466 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor60:actual positive input for mu=60

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S465

S467 · implies

Before

ORIGINAL positive integer absolute magnitude=60>1

After

initialize remaining=n,prime multiset empty;invariant product(extracted)*remaining=n;every smaller trial divisor has been exhausted

Conditions: none

Divide only by an actual divisor and exhaust smaller candidates,which justifies primality of each extracted divisor without assuming n is prime.

Step identifiers and dependencies

Rule: upf_factorization_remaining_product_invariant · Uses: G001, S466

S468 · calculation

Before

upf extract divisor2 occurrence0 := div(60, 2)

After

upf extract divisor2 occurrence0 = 30

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S467

S469 · calculation

Before

upf extract divisor2 occurrence1 := div(30, 2)

After

upf extract divisor2 occurrence1 = 15

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S468

S470 · implies

Before

next divisor=2;previous remaining=60;all smaller divisors exhausted

After

extracted multiplicity=2;next remaining=15;remaining modulo2=1;extracted multiset=[2, 2]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S469

S471 · calculation

Before

upf extract divisor3 occurrence2 := div(15, 3)

After

upf extract divisor3 occurrence2 = 5

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S470

S472 · implies

Before

next divisor=3;previous remaining=15;all smaller divisors exhausted

After

extracted multiplicity=1;next remaining=5;remaining modulo3=2;extracted multiset=[2, 2, 3]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S471

S473 · calculation

Before

upf canonical complete product factor0 := mul(1, 2)

After

upf canonical complete product factor0 = 2

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S472

S474 · calculation

Before

upf canonical complete product factor1 := mul(2, 2)

After

upf canonical complete product factor1 = 4

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S473

S475 · calculation

Before

upf canonical complete product factor2 := mul(4, 3)

After

upf canonical complete product factor2 = 12

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S474

S476 · calculation

Before

upf canonical complete product factor3 := mul(12, 5)

After

upf canonical complete product factor3 = 60

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S475

S477 · implies

Before

exhausted trial divisors below4;terminal remaining=5;d*d>remaining;ORIGINAL n=60

After

complete increasing prime multiset=[2, 2, 3, 5];full product=60;a composite terminal remainder would have an already tested smaller divisor

Conditions: none

Step identifiers and dependencies

Rule: upf_final_prime_remainder_complete_existence_instance · Uses: G001, S476

S478 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor60:input=60;COMPLETE prime multiset=[2, 2, 3, 5];distinct primes=[2, 3, 5]

After

mu=0;empty product case=No;repeated prime=Yes

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S477

S479 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor60 := div(240, 60)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor60 = 4

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S478

S480 · implies

Before

Mobius inversion ORIGINAL inverse F(n/60):actual positive input=4;check complete integer range1..4

After

ALL positive divisors INCREASING=[1, 2, 4];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S479

S481 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/60) f(1) ORIGINAL a times divisor := mul(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/60) f(1) ORIGINAL a times divisor = 14

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S480

S482 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/60) f(1) plus ORIGINAL b := sum(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/60) f(1) plus ORIGINAL b = 15

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S481

S483 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/60) f(2) ORIGINAL a times divisor := mul(14, 2)

After

Mobius inversion ORIGINAL inverse F(n/60) f(2) ORIGINAL a times divisor = 28

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S482

S484 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/60) f(2) plus ORIGINAL b := sum(28, 1)

After

Mobius inversion ORIGINAL inverse F(n/60) f(2) plus ORIGINAL b = 29

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S483

S485 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/60) f(4) ORIGINAL a times divisor := mul(14, 4)

After

Mobius inversion ORIGINAL inverse F(n/60) f(4) ORIGINAL a times divisor = 56

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S484

S486 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/60) f(4) plus ORIGINAL b := sum(56, 1)

After

Mobius inversion ORIGINAL inverse F(n/60) f(4) plus ORIGINAL b = 57

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S485

S487 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/60) full forward divisor sum := sum(15, 29, 57)

After

Mobius inversion ORIGINAL inverse F(n/60) full forward divisor sum = 101

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S486

S488 · calculation

Before

Mobius inversion ORIGINAL inverse mu(60) times SAME F(n/60) := mul(0, 101)

After

Mobius inversion ORIGINAL inverse mu(60) times SAME F(n/60) = 0

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S487

S489 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor80:actual positive input for mu=80

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S488

S490 · implies

Before

ORIGINAL positive integer absolute magnitude=80>1

After

initialize remaining=n,prime multiset empty;invariant product(extracted)*remaining=n;every smaller trial divisor has been exhausted

Conditions: none

Divide only by an actual divisor and exhaust smaller candidates,which justifies primality of each extracted divisor without assuming n is prime.

Step identifiers and dependencies

Rule: upf_factorization_remaining_product_invariant · Uses: G001, S489

S491 · calculation

Before

upf extract divisor2 occurrence0 := div(80, 2)

After

upf extract divisor2 occurrence0 = 40

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S490

S492 · calculation

Before

upf extract divisor2 occurrence1 := div(40, 2)

After

upf extract divisor2 occurrence1 = 20

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S491

S493 · calculation

Before

upf extract divisor2 occurrence2 := div(20, 2)

After

upf extract divisor2 occurrence2 = 10

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S492

S494 · calculation

Before

upf extract divisor2 occurrence3 := div(10, 2)

After

upf extract divisor2 occurrence3 = 5

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S493

S495 · implies

Before

next divisor=2;previous remaining=80;all smaller divisors exhausted

After

extracted multiplicity=4;next remaining=5;remaining modulo2=1;extracted multiset=[2, 2, 2, 2]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S494

S496 · calculation

Before

upf canonical complete product factor0 := mul(1, 2)

After

upf canonical complete product factor0 = 2

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S495

S497 · calculation

Before

upf canonical complete product factor1 := mul(2, 2)

After

upf canonical complete product factor1 = 4

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S496

S498 · calculation

Before

upf canonical complete product factor2 := mul(4, 2)

After

upf canonical complete product factor2 = 8

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S497

S499 · calculation

Before

upf canonical complete product factor3 := mul(8, 2)

After

upf canonical complete product factor3 = 16

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S498

S500 · calculation

Before

upf canonical complete product factor4 := mul(16, 5)

After

upf canonical complete product factor4 = 80

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S499

S501 · implies

Before

exhausted trial divisors below3;terminal remaining=5;d*d>remaining;ORIGINAL n=80

After

complete increasing prime multiset=[2, 2, 2, 2, 5];full product=80;a composite terminal remainder would have an already tested smaller divisor

Conditions: none

Step identifiers and dependencies

Rule: upf_final_prime_remainder_complete_existence_instance · Uses: G001, S500

S502 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor80:input=80;COMPLETE prime multiset=[2, 2, 2, 2, 5];distinct primes=[2, 5]

After

mu=0;empty product case=No;repeated prime=Yes

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S501

S503 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor80 := div(240, 80)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor80 = 3

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S502

S504 · implies

Before

Mobius inversion ORIGINAL inverse F(n/80):actual positive input=3;check complete integer range1..3

After

ALL positive divisors INCREASING=[1, 3];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S503

S505 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/80) f(1) ORIGINAL a times divisor := mul(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/80) f(1) ORIGINAL a times divisor = 14

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S504

S506 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/80) f(1) plus ORIGINAL b := sum(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/80) f(1) plus ORIGINAL b = 15

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S505

S507 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/80) f(3) ORIGINAL a times divisor := mul(14, 3)

After

Mobius inversion ORIGINAL inverse F(n/80) f(3) ORIGINAL a times divisor = 42

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S506

S508 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/80) f(3) plus ORIGINAL b := sum(42, 1)

After

Mobius inversion ORIGINAL inverse F(n/80) f(3) plus ORIGINAL b = 43

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S507

S509 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/80) full forward divisor sum := sum(15, 43)

After

Mobius inversion ORIGINAL inverse F(n/80) full forward divisor sum = 58

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S508

S510 · calculation

Before

Mobius inversion ORIGINAL inverse mu(80) times SAME F(n/80) := mul(0, 58)

After

Mobius inversion ORIGINAL inverse mu(80) times SAME F(n/80) = 0

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S509

S511 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor120:actual positive input for mu=120

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S510

S512 · implies

Before

ORIGINAL positive integer absolute magnitude=120>1

After

initialize remaining=n,prime multiset empty;invariant product(extracted)*remaining=n;every smaller trial divisor has been exhausted

Conditions: none

Divide only by an actual divisor and exhaust smaller candidates,which justifies primality of each extracted divisor without assuming n is prime.

Step identifiers and dependencies

Rule: upf_factorization_remaining_product_invariant · Uses: G001, S511

S513 · calculation

Before

upf extract divisor2 occurrence0 := div(120, 2)

After

upf extract divisor2 occurrence0 = 60

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S512

S514 · calculation

Before

upf extract divisor2 occurrence1 := div(60, 2)

After

upf extract divisor2 occurrence1 = 30

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S513

S515 · calculation

Before

upf extract divisor2 occurrence2 := div(30, 2)

After

upf extract divisor2 occurrence2 = 15

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S514

S516 · implies

Before

next divisor=2;previous remaining=120;all smaller divisors exhausted

After

extracted multiplicity=3;next remaining=15;remaining modulo2=1;extracted multiset=[2, 2, 2]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S515

S517 · calculation

Before

upf extract divisor3 occurrence3 := div(15, 3)

After

upf extract divisor3 occurrence3 = 5

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S516

S518 · implies

Before

next divisor=3;previous remaining=15;all smaller divisors exhausted

After

extracted multiplicity=1;next remaining=5;remaining modulo3=2;extracted multiset=[2, 2, 2, 3]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S517

S519 · calculation

Before

upf canonical complete product factor0 := mul(1, 2)

After

upf canonical complete product factor0 = 2

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S518

S520 · calculation

Before

upf canonical complete product factor1 := mul(2, 2)

After

upf canonical complete product factor1 = 4

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S519

S521 · calculation

Before

upf canonical complete product factor2 := mul(4, 2)

After

upf canonical complete product factor2 = 8

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S520

S522 · calculation

Before

upf canonical complete product factor3 := mul(8, 3)

After

upf canonical complete product factor3 = 24

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S521

S523 · calculation

Before

upf canonical complete product factor4 := mul(24, 5)

After

upf canonical complete product factor4 = 120

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S522

S524 · implies

Before

exhausted trial divisors below4;terminal remaining=5;d*d>remaining;ORIGINAL n=120

After

complete increasing prime multiset=[2, 2, 2, 3, 5];full product=120;a composite terminal remainder would have an already tested smaller divisor

Conditions: none

Step identifiers and dependencies

Rule: upf_final_prime_remainder_complete_existence_instance · Uses: G001, S523

S525 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor120:input=120;COMPLETE prime multiset=[2, 2, 2, 3, 5];distinct primes=[2, 3, 5]

After

mu=0;empty product case=No;repeated prime=Yes

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S524

S526 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor120 := div(240, 120)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor120 = 2

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S525

S527 · implies

Before

Mobius inversion ORIGINAL inverse F(n/120):actual positive input=2;check complete integer range1..2

After

ALL positive divisors INCREASING=[1, 2];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S526

S528 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/120) f(1) ORIGINAL a times divisor := mul(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/120) f(1) ORIGINAL a times divisor = 14

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S527

S529 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/120) f(1) plus ORIGINAL b := sum(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/120) f(1) plus ORIGINAL b = 15

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S528

S530 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/120) f(2) ORIGINAL a times divisor := mul(14, 2)

After

Mobius inversion ORIGINAL inverse F(n/120) f(2) ORIGINAL a times divisor = 28

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S529

S531 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/120) f(2) plus ORIGINAL b := sum(28, 1)

After

Mobius inversion ORIGINAL inverse F(n/120) f(2) plus ORIGINAL b = 29

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S530

S532 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/120) full forward divisor sum := sum(15, 29)

After

Mobius inversion ORIGINAL inverse F(n/120) full forward divisor sum = 44

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S531

S533 · calculation

Before

Mobius inversion ORIGINAL inverse mu(120) times SAME F(n/120) := mul(0, 44)

After

Mobius inversion ORIGINAL inverse mu(120) times SAME F(n/120) = 0

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S532

S534 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor240:actual positive input for mu=240

After

complete prime multiplicities required for this input;mu(1) uses empty product,not a partial factor search

Conditions: none

Identify whether the input is the original n or one of its positive divisors.Every mu evaluation requires complete prime multiplicities,not a partial factor search.

Step identifiers and dependencies

Rule: mobius_complete_UPF_input_role · Uses: G001, S533

S535 · implies

Before

ORIGINAL positive integer absolute magnitude=240>1

After

initialize remaining=n,prime multiset empty;invariant product(extracted)*remaining=n;every smaller trial divisor has been exhausted

Conditions: none

Divide only by an actual divisor and exhaust smaller candidates,which justifies primality of each extracted divisor without assuming n is prime.

Step identifiers and dependencies

Rule: upf_factorization_remaining_product_invariant · Uses: G001, S534

S536 · calculation

Before

upf extract divisor2 occurrence0 := div(240, 2)

After

upf extract divisor2 occurrence0 = 120

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S535

S537 · calculation

Before

upf extract divisor2 occurrence1 := div(120, 2)

After

upf extract divisor2 occurrence1 = 60

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S536

S538 · calculation

Before

upf extract divisor2 occurrence2 := div(60, 2)

After

upf extract divisor2 occurrence2 = 30

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S537

S539 · calculation

Before

upf extract divisor2 occurrence3 := div(30, 2)

After

upf extract divisor2 occurrence3 = 15

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S538

S540 · implies

Before

next divisor=2;previous remaining=240;all smaller divisors exhausted

After

extracted multiplicity=4;next remaining=15;remaining modulo2=1;extracted multiset=[2, 2, 2, 2]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S539

S541 · calculation

Before

upf extract divisor3 occurrence4 := div(15, 3)

After

upf extract divisor3 occurrence4 = 5

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S540

S542 · implies

Before

next divisor=3;previous remaining=15;all smaller divisors exhausted

After

extracted multiplicity=1;next remaining=5;remaining modulo3=2;extracted multiset=[2, 2, 2, 2, 3]

Conditions: none

Exhaust every multiplicity before advancing.The stopping test concerns the current remainder,and the final prime remainder must not be omitted.

Step identifiers and dependencies

Rule: upf_complete_trial_division_remaining_invariant · Uses: G001, S541

S543 · calculation

Before

upf canonical complete product factor0 := mul(1, 2)

After

upf canonical complete product factor0 = 2

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S542

S544 · calculation

Before

upf canonical complete product factor1 := mul(2, 2)

After

upf canonical complete product factor1 = 4

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S543

S545 · calculation

Before

upf canonical complete product factor2 := mul(4, 2)

After

upf canonical complete product factor2 = 8

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S544

S546 · calculation

Before

upf canonical complete product factor3 := mul(8, 2)

After

upf canonical complete product factor3 = 16

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S545

S547 · calculation

Before

upf canonical complete product factor4 := mul(16, 3)

After

upf canonical complete product factor4 = 48

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S546

S548 · calculation

Before

upf canonical complete product factor5 := mul(48, 5)

After

upf canonical complete product factor5 = 240

Conditions: none

Substitute the original roles and established intermediates exactly,retaining order,signs and quantified conditions.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S547

S549 · implies

Before

exhausted trial divisors below4;terminal remaining=5;d*d>remaining;ORIGINAL n=240

After

complete increasing prime multiset=[2, 2, 2, 2, 3, 5];full product=240;a composite terminal remainder would have an already tested smaller divisor

Conditions: none

Step identifiers and dependencies

Rule: upf_final_prime_remainder_complete_existence_instance · Uses: G001, S548

S550 · implies

Before

Mobius inversion ORIGINAL inverse Mobius at ORIGINAL divisor240:input=240;COMPLETE prime multiset=[2, 2, 2, 2, 3, 5];distinct primes=[2, 3, 5]

After

mu=0;empty product case=No;repeated prime=Yes

Conditions: none

The empty prime multiset for1 gives mu1=1.A repeated prime gives a square divisor and value0;otherwise distinct-prime parity determines the sign.Sorting must not discard multiplicities.

Step identifiers and dependencies

Rule: mobius_value_one_repeated_prime_or_squarefree_parity · Uses: G001, S549

S551 · calculation

Before

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor240 := div(240, 240)

After

Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor240 = 1

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S550

S552 · implies

Before

Mobius inversion ORIGINAL inverse F(n/240):actual positive input=1;check complete integer range1..1

After

ALL positive divisors INCREASING=[1];not only primes/proper divisors or all integers<=n

Conditions: none

Check divisibility over the complete range,retaining1 and n.The relation d|n is neither d<=n nor a prime/proper-divisor restriction.

Step identifiers and dependencies

Rule: mobinv_ALL_positive_divisors_complete_indexing · Uses: G001, S551

S553 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/240) f(1) ORIGINAL a times divisor := mul(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/240) f(1) ORIGINAL a times divisor = 14

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S552

S554 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/240) f(1) plus ORIGINAL b := sum(14, 1)

After

Mobius inversion ORIGINAL inverse F(n/240) f(1) plus ORIGINAL b = 15

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S553

S555 · calculation

Before

Mobius inversion ORIGINAL inverse F(n/240) full forward divisor sum := sum(15)

After

Mobius inversion ORIGINAL inverse F(n/240) full forward divisor sum = 15

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S554

S556 · calculation

Before

Mobius inversion ORIGINAL inverse mu(240) times SAME F(n/240) := mul(0, 15)

After

Mobius inversion ORIGINAL inverse mu(240) times SAME F(n/240) = 0

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S555

S557 · calculation

Before

Mobius inversion ORIGINAL inverse complete inverse-term sum := sum(10436, -5056, -2614, 0, -1746, 1268, 0, 848, 0, 439, 0, 0, 0, -214, 0, 0, 0, 0, 0, 0)

After

Mobius inversion ORIGINAL inverse complete inverse-term sum = 3361

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S556

S558 · calculation

Before

Mobius inversion ORIGINAL inverse direct ORIGINAL a times n := mul(14, 240)

After

Mobius inversion ORIGINAL inverse direct ORIGINAL a times n = 3360

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S557

S559 · calculation

Before

Mobius inversion ORIGINAL inverse direct plus ORIGINAL b := sum(3360, 1)

After

Mobius inversion ORIGINAL inverse direct plus ORIGINAL b = 3361

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S558

S560 · implies

Before

Mobius inversion ORIGINAL inverse:actual n=240;ALL [d,mu(d),n/d,F(n/d),mu(d)*F(n/d)] rows=[[1, 1, 240, 10436, 10436], [2, -1, 120, 5056, -5056], [3, -1, 80, 2614, -2614], [4, 0, 60, 2364, 0], [5, -1, 48, 1746, -1746], [6, 1, 40, 1268, 1268], [8, 0, 30, 1016, 0], [10, 1, 24, 848, 848], [12, 0, 20, 594, 0], [15, 1, 16, 439, 439], [16, 0, 15, 340, 0], [20, 0, 12, 398, 0], [24, 0, 10, 256, 0], [30, -1, 8, 214, -214], [40, 0, 6, 172, 0], [48, 0, 5, 86, 0], [60, 0, 4, 101, 0], [80, 0, 3, 58, 0], [120, 0, 2, 44, 0], [240, 0, 1, 15, 0]]

After

complete reconstructed=3361;direct f(n)=3361;sum_d mu(d)sum_e|n/d f(e)=sum_e|n f(e)sum_d|n/e mu(d)=f(n)

Conditions: none

Swap the finite sums over d*e|n.The inner Mobius sum is1 for n/e=1 and0 otherwise by pairing distinct-prime subsets,leaving only e=n.For n1,the d1 term and mu1=1 remain;do not mix indices from the alternate equivalent convention.

Step identifiers and dependencies

Rule: mobinv_general_finite_double_sum_and_Mobius_cancellation · Uses: G001, S559

S561 · calculation

Before

Mobius inversion ORIGINAL omitted-divisor partial sum := sum(-5056, -2614, 0, -1746, 1268, 0, 848, 0, 439, 0, 0, 0, -214, 0, 0, 0, 0, 0, 0)

After

Mobius inversion ORIGINAL omitted-divisor partial sum = -7075

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S560

S562 · calculation

Before

Mobius inversion complete minus partial := sub(3361, -7075)

After

Mobius inversion complete minus partial = 10436

Conditions: none

Substitute original roles,order and established intermediates exactly,without changing source bindings or using floating-point approximations.

Step identifiers and dependencies

Rule: exact_rational_arithmetic · Uses: G001, S561

S563 · implies

Before

ORIGINAL full divisors=[1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 16, 20, 24, 30, 40, 48, 60, 80, 120, 240];actual omitted divisor=1;remaining ORIGINAL-order divisors=[2, 3, 4, 5, 6, 8, 10, 12, 15, 16, 20, 24, 30, 40, 48, 60, 80, 120, 240]

After

complete=3361=f(n)=3361;partial=-7075;lost term=10436!=0;incomplete_certificate fixed No

Conditions: none

The omitted value must be an actual divisor with nonzero contribution,so the partial result differs from the target.Omitting a zero term does not qualify this discriminative boundary.The No rejects the incomplete certificate,not the complete inversion.

Step identifiers and dependencies

Rule: mobinv_omission_actual_nonzero_discriminative_term · Uses: G001, S562

Reverse checks

S563 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S562 · premise_and_result_audit — Recompute Mobius inversion complete minus partial with exact rational arithmetic, not rounded decimals.
S561 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL omitted-divisor partial sum with exact rational arithmetic, not rounded decimals.
S560 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S559 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse direct plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S558 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse direct ORIGINAL a times n with exact rational arithmetic, not rounded decimals.
S557 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse complete inverse-term sum with exact rational arithmetic, not rounded decimals.
S556 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(240) times SAME F(n/240) with exact rational arithmetic, not rounded decimals.
S555 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/240) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S554 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/240) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S553 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/240) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S552 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S551 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor240 with exact rational arithmetic, not rounded decimals.
S550 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S549 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S548 · premise_and_result_audit — Recompute upf canonical complete product factor5 with exact rational arithmetic, not rounded decimals.
S547 · premise_and_result_audit — Recompute upf canonical complete product factor4 with exact rational arithmetic, not rounded decimals.
S546 · premise_and_result_audit — Recompute upf canonical complete product factor3 with exact rational arithmetic, not rounded decimals.
S545 · premise_and_result_audit — Recompute upf canonical complete product factor2 with exact rational arithmetic, not rounded decimals.
S544 · premise_and_result_audit — Recompute upf canonical complete product factor1 with exact rational arithmetic, not rounded decimals.
S543 · premise_and_result_audit — Recompute upf canonical complete product factor0 with exact rational arithmetic, not rounded decimals.
S542 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S541 · premise_and_result_audit — Recompute upf extract divisor3 occurrence4 with exact rational arithmetic, not rounded decimals.
S540 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S539 · premise_and_result_audit — Recompute upf extract divisor2 occurrence3 with exact rational arithmetic, not rounded decimals.
S538 · premise_and_result_audit — Recompute upf extract divisor2 occurrence2 with exact rational arithmetic, not rounded decimals.
S537 · premise_and_result_audit — Recompute upf extract divisor2 occurrence1 with exact rational arithmetic, not rounded decimals.
S536 · premise_and_result_audit — Recompute upf extract divisor2 occurrence0 with exact rational arithmetic, not rounded decimals.
S535 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S534 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S533 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(120) times SAME F(n/120) with exact rational arithmetic, not rounded decimals.
S532 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/120) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S531 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/120) f(2) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S530 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/120) f(2) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S529 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/120) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S528 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/120) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S527 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S526 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor120 with exact rational arithmetic, not rounded decimals.
S525 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S524 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S523 · premise_and_result_audit — Recompute upf canonical complete product factor4 with exact rational arithmetic, not rounded decimals.
S522 · premise_and_result_audit — Recompute upf canonical complete product factor3 with exact rational arithmetic, not rounded decimals.
S521 · premise_and_result_audit — Recompute upf canonical complete product factor2 with exact rational arithmetic, not rounded decimals.
S520 · premise_and_result_audit — Recompute upf canonical complete product factor1 with exact rational arithmetic, not rounded decimals.
S519 · premise_and_result_audit — Recompute upf canonical complete product factor0 with exact rational arithmetic, not rounded decimals.
S518 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S517 · premise_and_result_audit — Recompute upf extract divisor3 occurrence3 with exact rational arithmetic, not rounded decimals.
S516 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S515 · premise_and_result_audit — Recompute upf extract divisor2 occurrence2 with exact rational arithmetic, not rounded decimals.
S514 · premise_and_result_audit — Recompute upf extract divisor2 occurrence1 with exact rational arithmetic, not rounded decimals.
S513 · premise_and_result_audit — Recompute upf extract divisor2 occurrence0 with exact rational arithmetic, not rounded decimals.
S512 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S511 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S510 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(80) times SAME F(n/80) with exact rational arithmetic, not rounded decimals.
S509 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/80) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S508 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/80) f(3) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S507 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/80) f(3) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S506 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/80) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S505 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/80) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S504 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S503 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor80 with exact rational arithmetic, not rounded decimals.
S502 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S501 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S500 · premise_and_result_audit — Recompute upf canonical complete product factor4 with exact rational arithmetic, not rounded decimals.
S499 · premise_and_result_audit — Recompute upf canonical complete product factor3 with exact rational arithmetic, not rounded decimals.
S498 · premise_and_result_audit — Recompute upf canonical complete product factor2 with exact rational arithmetic, not rounded decimals.
S497 · premise_and_result_audit — Recompute upf canonical complete product factor1 with exact rational arithmetic, not rounded decimals.
S496 · premise_and_result_audit — Recompute upf canonical complete product factor0 with exact rational arithmetic, not rounded decimals.
S495 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S494 · premise_and_result_audit — Recompute upf extract divisor2 occurrence3 with exact rational arithmetic, not rounded decimals.
S493 · premise_and_result_audit — Recompute upf extract divisor2 occurrence2 with exact rational arithmetic, not rounded decimals.
S492 · premise_and_result_audit — Recompute upf extract divisor2 occurrence1 with exact rational arithmetic, not rounded decimals.
S491 · premise_and_result_audit — Recompute upf extract divisor2 occurrence0 with exact rational arithmetic, not rounded decimals.
S490 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S489 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S488 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(60) times SAME F(n/60) with exact rational arithmetic, not rounded decimals.
S487 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/60) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S486 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/60) f(4) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S485 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/60) f(4) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S484 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/60) f(2) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S483 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/60) f(2) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S482 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/60) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S481 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/60) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S480 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S479 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor60 with exact rational arithmetic, not rounded decimals.
S478 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S477 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S476 · premise_and_result_audit — Recompute upf canonical complete product factor3 with exact rational arithmetic, not rounded decimals.
S475 · premise_and_result_audit — Recompute upf canonical complete product factor2 with exact rational arithmetic, not rounded decimals.
S474 · premise_and_result_audit — Recompute upf canonical complete product factor1 with exact rational arithmetic, not rounded decimals.
S473 · premise_and_result_audit — Recompute upf canonical complete product factor0 with exact rational arithmetic, not rounded decimals.
S472 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S471 · premise_and_result_audit — Recompute upf extract divisor3 occurrence2 with exact rational arithmetic, not rounded decimals.
S470 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S469 · premise_and_result_audit — Recompute upf extract divisor2 occurrence1 with exact rational arithmetic, not rounded decimals.
S468 · premise_and_result_audit — Recompute upf extract divisor2 occurrence0 with exact rational arithmetic, not rounded decimals.
S467 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S466 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S465 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(48) times SAME F(n/48) with exact rational arithmetic, not rounded decimals.
S464 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/48) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S463 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/48) f(5) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S462 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/48) f(5) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S461 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/48) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S460 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/48) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S459 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S458 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor48 with exact rational arithmetic, not rounded decimals.
S457 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S456 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S455 · premise_and_result_audit — Recompute upf canonical complete product factor4 with exact rational arithmetic, not rounded decimals.
S454 · premise_and_result_audit — Recompute upf canonical complete product factor3 with exact rational arithmetic, not rounded decimals.
S453 · premise_and_result_audit — Recompute upf canonical complete product factor2 with exact rational arithmetic, not rounded decimals.
S452 · premise_and_result_audit — Recompute upf canonical complete product factor1 with exact rational arithmetic, not rounded decimals.
S451 · premise_and_result_audit — Recompute upf canonical complete product factor0 with exact rational arithmetic, not rounded decimals.
S450 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S449 · premise_and_result_audit — Recompute upf extract divisor2 occurrence3 with exact rational arithmetic, not rounded decimals.
S448 · premise_and_result_audit — Recompute upf extract divisor2 occurrence2 with exact rational arithmetic, not rounded decimals.
S447 · premise_and_result_audit — Recompute upf extract divisor2 occurrence1 with exact rational arithmetic, not rounded decimals.
S446 · premise_and_result_audit — Recompute upf extract divisor2 occurrence0 with exact rational arithmetic, not rounded decimals.
S445 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S444 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S443 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(40) times SAME F(n/40) with exact rational arithmetic, not rounded decimals.
S442 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/40) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S441 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/40) f(6) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S440 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/40) f(6) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S439 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/40) f(3) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S438 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/40) f(3) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S437 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/40) f(2) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S436 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/40) f(2) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S435 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/40) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S434 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/40) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S433 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S432 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor40 with exact rational arithmetic, not rounded decimals.
S431 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S430 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S429 · premise_and_result_audit — Recompute upf canonical complete product factor3 with exact rational arithmetic, not rounded decimals.
S428 · premise_and_result_audit — Recompute upf canonical complete product factor2 with exact rational arithmetic, not rounded decimals.
S427 · premise_and_result_audit — Recompute upf canonical complete product factor1 with exact rational arithmetic, not rounded decimals.
S426 · premise_and_result_audit — Recompute upf canonical complete product factor0 with exact rational arithmetic, not rounded decimals.
S425 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S424 · premise_and_result_audit — Recompute upf extract divisor2 occurrence2 with exact rational arithmetic, not rounded decimals.
S423 · premise_and_result_audit — Recompute upf extract divisor2 occurrence1 with exact rational arithmetic, not rounded decimals.
S422 · premise_and_result_audit — Recompute upf extract divisor2 occurrence0 with exact rational arithmetic, not rounded decimals.
S421 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S420 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S419 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(30) times SAME F(n/30) with exact rational arithmetic, not rounded decimals.
S418 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/30) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S417 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/30) f(8) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S416 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/30) f(8) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S415 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/30) f(4) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S414 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/30) f(4) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S413 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/30) f(2) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S412 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/30) f(2) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S411 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/30) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S410 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/30) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S409 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S408 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor30 with exact rational arithmetic, not rounded decimals.
S407 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S406 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S405 · premise_and_result_audit — Recompute upf canonical complete product factor2 with exact rational arithmetic, not rounded decimals.
S404 · premise_and_result_audit — Recompute upf canonical complete product factor1 with exact rational arithmetic, not rounded decimals.
S403 · premise_and_result_audit — Recompute upf canonical complete product factor0 with exact rational arithmetic, not rounded decimals.
S402 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S401 · premise_and_result_audit — Recompute upf extract divisor3 occurrence1 with exact rational arithmetic, not rounded decimals.
S400 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S399 · premise_and_result_audit — Recompute upf extract divisor2 occurrence0 with exact rational arithmetic, not rounded decimals.
S398 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S397 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S396 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(24) times SAME F(n/24) with exact rational arithmetic, not rounded decimals.
S395 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/24) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S394 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/24) f(10) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S393 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/24) f(10) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S392 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/24) f(5) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S391 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/24) f(5) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S390 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/24) f(2) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S389 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/24) f(2) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S388 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/24) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S387 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/24) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S386 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S385 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor24 with exact rational arithmetic, not rounded decimals.
S384 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S383 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S382 · premise_and_result_audit — Recompute upf canonical complete product factor3 with exact rational arithmetic, not rounded decimals.
S381 · premise_and_result_audit — Recompute upf canonical complete product factor2 with exact rational arithmetic, not rounded decimals.
S380 · premise_and_result_audit — Recompute upf canonical complete product factor1 with exact rational arithmetic, not rounded decimals.
S379 · premise_and_result_audit — Recompute upf canonical complete product factor0 with exact rational arithmetic, not rounded decimals.
S378 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S377 · premise_and_result_audit — Recompute upf extract divisor2 occurrence2 with exact rational arithmetic, not rounded decimals.
S376 · premise_and_result_audit — Recompute upf extract divisor2 occurrence1 with exact rational arithmetic, not rounded decimals.
S375 · premise_and_result_audit — Recompute upf extract divisor2 occurrence0 with exact rational arithmetic, not rounded decimals.
S374 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S373 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S372 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(20) times SAME F(n/20) with exact rational arithmetic, not rounded decimals.
S371 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/20) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S370 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/20) f(12) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S369 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/20) f(12) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S368 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/20) f(6) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S367 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/20) f(6) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S366 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/20) f(4) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S365 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/20) f(4) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S364 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/20) f(3) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S363 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/20) f(3) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S362 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/20) f(2) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S361 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/20) f(2) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S360 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/20) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S359 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/20) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S358 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S357 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor20 with exact rational arithmetic, not rounded decimals.
S356 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S355 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S354 · premise_and_result_audit — Recompute upf canonical complete product factor2 with exact rational arithmetic, not rounded decimals.
S353 · premise_and_result_audit — Recompute upf canonical complete product factor1 with exact rational arithmetic, not rounded decimals.
S352 · premise_and_result_audit — Recompute upf canonical complete product factor0 with exact rational arithmetic, not rounded decimals.
S351 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S350 · premise_and_result_audit — Recompute upf extract divisor2 occurrence1 with exact rational arithmetic, not rounded decimals.
S349 · premise_and_result_audit — Recompute upf extract divisor2 occurrence0 with exact rational arithmetic, not rounded decimals.
S348 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S347 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S346 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(16) times SAME F(n/16) with exact rational arithmetic, not rounded decimals.
S345 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/16) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S344 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/16) f(15) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S343 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/16) f(15) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S342 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/16) f(5) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S341 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/16) f(5) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S340 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/16) f(3) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S339 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/16) f(3) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S338 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/16) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S337 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/16) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S336 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S335 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor16 with exact rational arithmetic, not rounded decimals.
S334 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S333 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S332 · premise_and_result_audit — Recompute upf canonical complete product factor3 with exact rational arithmetic, not rounded decimals.
S331 · premise_and_result_audit — Recompute upf canonical complete product factor2 with exact rational arithmetic, not rounded decimals.
S330 · premise_and_result_audit — Recompute upf canonical complete product factor1 with exact rational arithmetic, not rounded decimals.
S329 · premise_and_result_audit — Recompute upf canonical complete product factor0 with exact rational arithmetic, not rounded decimals.
S328 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S327 · premise_and_result_audit — Recompute upf extract divisor2 occurrence3 with exact rational arithmetic, not rounded decimals.
S326 · premise_and_result_audit — Recompute upf extract divisor2 occurrence2 with exact rational arithmetic, not rounded decimals.
S325 · premise_and_result_audit — Recompute upf extract divisor2 occurrence1 with exact rational arithmetic, not rounded decimals.
S324 · premise_and_result_audit — Recompute upf extract divisor2 occurrence0 with exact rational arithmetic, not rounded decimals.
S323 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S322 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S321 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(15) times SAME F(n/15) with exact rational arithmetic, not rounded decimals.
S320 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/15) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S319 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/15) f(16) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S318 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/15) f(16) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S317 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/15) f(8) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S316 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/15) f(8) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S315 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/15) f(4) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S314 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/15) f(4) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S313 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/15) f(2) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S312 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/15) f(2) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S311 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/15) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S310 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/15) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S309 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S308 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor15 with exact rational arithmetic, not rounded decimals.
S307 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S306 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S305 · premise_and_result_audit — Recompute upf canonical complete product factor1 with exact rational arithmetic, not rounded decimals.
S304 · premise_and_result_audit — Recompute upf canonical complete product factor0 with exact rational arithmetic, not rounded decimals.
S303 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S302 · premise_and_result_audit — Recompute upf extract divisor3 occurrence0 with exact rational arithmetic, not rounded decimals.
S301 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S300 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S299 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S298 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(12) times SAME F(n/12) with exact rational arithmetic, not rounded decimals.
S297 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/12) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S296 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/12) f(20) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S295 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/12) f(20) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S294 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/12) f(10) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S293 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/12) f(10) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S292 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/12) f(5) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S291 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/12) f(5) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S290 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/12) f(4) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S289 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/12) f(4) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S288 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/12) f(2) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S287 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/12) f(2) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S286 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/12) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S285 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/12) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S284 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S283 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor12 with exact rational arithmetic, not rounded decimals.
S282 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S281 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S280 · premise_and_result_audit — Recompute upf canonical complete product factor2 with exact rational arithmetic, not rounded decimals.
S279 · premise_and_result_audit — Recompute upf canonical complete product factor1 with exact rational arithmetic, not rounded decimals.
S278 · premise_and_result_audit — Recompute upf canonical complete product factor0 with exact rational arithmetic, not rounded decimals.
S277 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S276 · premise_and_result_audit — Recompute upf extract divisor2 occurrence1 with exact rational arithmetic, not rounded decimals.
S275 · premise_and_result_audit — Recompute upf extract divisor2 occurrence0 with exact rational arithmetic, not rounded decimals.
S274 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S273 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S272 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(10) times SAME F(n/10) with exact rational arithmetic, not rounded decimals.
S271 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/10) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S270 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/10) f(24) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S269 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/10) f(24) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S268 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/10) f(12) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S267 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/10) f(12) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S266 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/10) f(8) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S265 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/10) f(8) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S264 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/10) f(6) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S263 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/10) f(6) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S262 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/10) f(4) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S261 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/10) f(4) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S260 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/10) f(3) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S259 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/10) f(3) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S258 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/10) f(2) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S257 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/10) f(2) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S256 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/10) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S255 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/10) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S254 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S253 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor10 with exact rational arithmetic, not rounded decimals.
S252 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S251 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S250 · premise_and_result_audit — Recompute upf canonical complete product factor1 with exact rational arithmetic, not rounded decimals.
S249 · premise_and_result_audit — Recompute upf canonical complete product factor0 with exact rational arithmetic, not rounded decimals.
S248 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S247 · premise_and_result_audit — Recompute upf extract divisor2 occurrence0 with exact rational arithmetic, not rounded decimals.
S246 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S245 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S244 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(8) times SAME F(n/8) with exact rational arithmetic, not rounded decimals.
S243 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/8) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S242 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/8) f(30) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S241 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/8) f(30) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S240 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/8) f(15) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S239 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/8) f(15) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S238 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/8) f(10) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S237 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/8) f(10) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S236 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/8) f(6) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S235 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/8) f(6) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S234 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/8) f(5) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S233 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/8) f(5) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S232 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/8) f(3) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S231 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/8) f(3) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S230 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/8) f(2) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S229 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/8) f(2) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S228 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/8) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S227 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/8) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S226 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S225 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor8 with exact rational arithmetic, not rounded decimals.
S224 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S223 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S222 · premise_and_result_audit — Recompute upf canonical complete product factor2 with exact rational arithmetic, not rounded decimals.
S221 · premise_and_result_audit — Recompute upf canonical complete product factor1 with exact rational arithmetic, not rounded decimals.
S220 · premise_and_result_audit — Recompute upf canonical complete product factor0 with exact rational arithmetic, not rounded decimals.
S219 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S218 · premise_and_result_audit — Recompute upf extract divisor2 occurrence2 with exact rational arithmetic, not rounded decimals.
S217 · premise_and_result_audit — Recompute upf extract divisor2 occurrence1 with exact rational arithmetic, not rounded decimals.
S216 · premise_and_result_audit — Recompute upf extract divisor2 occurrence0 with exact rational arithmetic, not rounded decimals.
S215 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S214 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S213 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(6) times SAME F(n/6) with exact rational arithmetic, not rounded decimals.
S212 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/6) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S211 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/6) f(40) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S210 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/6) f(40) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S209 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/6) f(20) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S208 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/6) f(20) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S207 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/6) f(10) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S206 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/6) f(10) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S205 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/6) f(8) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S204 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/6) f(8) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S203 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/6) f(5) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S202 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/6) f(5) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S201 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/6) f(4) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S200 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/6) f(4) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S199 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/6) f(2) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S198 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/6) f(2) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S197 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/6) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S196 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/6) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S195 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S194 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor6 with exact rational arithmetic, not rounded decimals.
S193 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S192 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S191 · premise_and_result_audit — Recompute upf canonical complete product factor1 with exact rational arithmetic, not rounded decimals.
S190 · premise_and_result_audit — Recompute upf canonical complete product factor0 with exact rational arithmetic, not rounded decimals.
S189 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S188 · premise_and_result_audit — Recompute upf extract divisor2 occurrence0 with exact rational arithmetic, not rounded decimals.
S187 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S186 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S185 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(5) times SAME F(n/5) with exact rational arithmetic, not rounded decimals.
S184 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S183 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(48) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S182 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(48) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S181 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(24) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S180 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(24) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S179 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(16) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S178 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(16) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S177 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(12) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S176 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(12) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S175 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(8) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S174 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(8) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S173 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(6) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S172 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(6) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S171 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(4) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S170 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(4) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S169 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(3) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S168 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(3) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S167 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(2) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S166 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(2) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S165 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S164 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/5) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S163 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S162 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor5 with exact rational arithmetic, not rounded decimals.
S161 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S160 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S159 · premise_and_result_audit — Recompute upf canonical complete product factor0 with exact rational arithmetic, not rounded decimals.
S158 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S157 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S156 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S155 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(4) times SAME F(n/4) with exact rational arithmetic, not rounded decimals.
S154 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/4) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S153 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/4) f(60) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S152 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/4) f(60) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S151 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/4) f(30) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S150 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/4) f(30) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S149 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/4) f(20) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S148 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/4) f(20) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S147 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/4) f(15) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S146 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/4) f(15) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S145 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/4) f(12) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S144 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/4) f(12) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S143 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/4) f(10) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S142 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/4) f(10) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S141 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/4) f(6) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S140 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/4) f(6) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S139 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/4) f(5) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S138 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/4) f(5) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S137 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/4) f(4) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S136 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/4) f(4) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S135 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/4) f(3) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S134 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/4) f(3) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S133 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/4) f(2) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S132 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/4) f(2) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S131 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/4) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S130 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/4) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S129 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S128 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor4 with exact rational arithmetic, not rounded decimals.
S127 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S126 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S125 · premise_and_result_audit — Recompute upf canonical complete product factor1 with exact rational arithmetic, not rounded decimals.
S124 · premise_and_result_audit — Recompute upf canonical complete product factor0 with exact rational arithmetic, not rounded decimals.
S123 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S122 · premise_and_result_audit — Recompute upf extract divisor2 occurrence1 with exact rational arithmetic, not rounded decimals.
S121 · premise_and_result_audit — Recompute upf extract divisor2 occurrence0 with exact rational arithmetic, not rounded decimals.
S120 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S119 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S118 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(3) times SAME F(n/3) with exact rational arithmetic, not rounded decimals.
S117 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/3) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S116 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/3) f(80) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S115 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/3) f(80) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S114 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/3) f(40) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S113 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/3) f(40) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S112 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/3) f(20) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S111 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/3) f(20) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S110 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/3) f(16) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S109 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/3) f(16) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S108 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/3) f(10) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S107 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/3) f(10) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S106 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/3) f(8) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S105 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/3) f(8) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S104 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/3) f(5) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S103 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/3) f(5) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S102 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/3) f(4) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S101 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/3) f(4) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S100 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/3) f(2) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S099 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/3) f(2) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S098 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/3) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S097 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/3) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S096 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S095 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor3 with exact rational arithmetic, not rounded decimals.
S094 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S093 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S092 · premise_and_result_audit — Recompute upf canonical complete product factor0 with exact rational arithmetic, not rounded decimals.
S091 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S090 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S089 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(2) times SAME F(n/2) with exact rational arithmetic, not rounded decimals.
S088 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S087 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(120) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S086 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(120) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S085 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(60) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S084 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(60) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S083 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(40) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S082 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(40) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S081 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(30) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S080 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(30) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S079 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(24) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S078 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(24) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S077 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(20) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S076 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(20) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S075 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(15) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S074 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(15) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S073 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(12) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S072 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(12) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S071 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(10) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S070 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(10) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S069 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(8) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S068 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(8) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S067 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(6) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S066 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(6) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S065 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(5) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S064 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(5) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S063 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(4) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S062 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(4) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S061 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(3) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S060 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(3) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S059 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(2) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S058 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(2) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S057 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S056 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/2) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S055 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S054 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor2 with exact rational arithmetic, not rounded decimals.
S053 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S052 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S051 · premise_and_result_audit — Recompute upf canonical complete product factor0 with exact rational arithmetic, not rounded decimals.
S050 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S049 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S048 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse mu(1) times SAME F(n/1) with exact rational arithmetic, not rounded decimals.
S047 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) full forward divisor sum with exact rational arithmetic, not rounded decimals.
S046 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(240) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S045 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(240) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S044 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(120) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S043 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(120) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S042 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(80) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S041 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(80) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S040 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(60) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S039 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(60) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S038 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(48) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S037 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(48) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S036 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(40) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S035 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(40) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S034 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(30) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S033 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(30) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S032 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(24) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S031 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(24) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S030 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(20) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S029 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(20) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S028 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(16) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S027 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(16) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S026 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(15) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S025 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(15) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S024 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(12) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S023 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(12) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S022 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(10) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S021 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(10) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S020 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(8) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S019 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(8) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S018 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(6) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S017 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(6) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S016 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(5) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S015 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(5) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S014 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(4) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S013 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(4) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S012 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(3) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S011 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(3) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S010 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(2) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S009 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(2) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S008 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(1) plus ORIGINAL b with exact rational arithmetic, not rounded decimals.
S007 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse F(n/1) f(1) ORIGINAL a times divisor with exact rational arithmetic, not rounded decimals.
S006 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S005 · premise_and_result_audit — Recompute Mobius inversion ORIGINAL inverse n divided by ORIGINAL divisor1 with exact rational arithmetic, not rounded decimals.
S004 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S003 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S002 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.
S001 · premise_and_result_audit — Check against the original data and this step's premises; a one-way implication is not an equivalence.

Result

(240, [1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 16, 20, 24, 30, 40, 48, 60, 80, 120, 240], 1, [2, 3, 4, 5, 6, 8, 10, 12, 15, 16, 20, 24, 30, 40, 48, 60, 80, 120, 240], 3361, -7075, 3361, No, all_positive_divisors_and_consistent_d_to_n_over_d_indexing_required)

The full substitutions and premise checks give the original answer; source identity,format and status are unchanged.

This question review and source binding

Review date: 2026-10-26

Original questions, answers, step expressions, numeric ASTs and historical records are retained. Source candidate labels remain historical and are not overwritten as formal proof.

Source hashes and review receipts

input commit: 0f7be61e2c22317a4075561dc822c87d881a50db
original question SHA-256: 683bbc5f1012f231d5e027f7f0e486f8804ca067958417064583967e4e3a12f6
candidate record SHA-256: c75439a7e070ce06bcc93dc3f5ad13ebce4989dca7bb28ff25b98a1fed3dc9de
semantic review receipt SHA-256: 49cf6ec60211c92d1c0c302663af4d44479635dc8181fb61a20c3374288e21c5
question-first witness SHA-256: 10fd25b4643e5ff12753daceaa61f9f2499bf381f65ef96e9d21185c7c0d0c5e
Lean: NOT_RUN · human review: NOT_PERFORMED

Same-source full JSON