逐步推導
S001 · implies
操作前
source operation=eulerthm-unit-permutation;original snapshot and mathematics retained
操作後
explicit ordered source output fields=[units, sorted_mapped_units, permutation, certificate]
條件:無
原題快照保留歷史介面標記;本頁直接列來源欄位順序,不需JavaScript或外部表。欄位標籤不是額外數學證據,No保持原題的聲稱範圍。
步驟識別與依賴
規則:source_ordered_interface_explicit_without_javascript · 依賴:G001
S002 · calculation
操作前
Euler ORIGINAL signed base normalization exact quotient := div(17, 20)
操作後
Euler ORIGINAL signed base normalization exact quotient = 17/20
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S001
S003 · calculation
操作前
Euler ORIGINAL signed base normalization floor quotient multiple := mul(0, 20)
操作後
Euler ORIGINAL signed base normalization floor quotient multiple = 0
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S002
S004 · calculation
操作前
Euler ORIGINAL signed base normalization normalized remainder := sub(17, 0)
操作後
Euler ORIGINAL signed base normalization normalized remainder = 17
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S003
S005 · implies
操作前
Euler ORIGINAL signed base normalization:ORIGINAL signed integer=17;modulus=20;exact ratio=17/20;floor quotient=0
操作後
value=q*n+remainder;normalized residue=17 in[0,20);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S004
S006 · implies
操作前
Euler ORIGINAL base applicability gcd:ORIGINAL gcd inputs=[17, 20];nonnegative initial pair=[17, 20]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[17, 20, 0, 17], [20, 17, 1, 3], [17, 3, 5, 2], [3, 2, 1, 1], [2, 1, 2, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S005
S007 · implies
操作前
Euler residue representative0:ORIGINAL gcd inputs=[0, 20];nonnegative initial pair=[0, 20]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[0, 20, 0, 0]];terminal gcd=20
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S006
S008 · implies
操作前
Euler residue representative1:ORIGINAL gcd inputs=[1, 20];nonnegative initial pair=[1, 20]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[1, 20, 0, 1], [20, 1, 20, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S007
S009 · implies
操作前
Euler residue representative2:ORIGINAL gcd inputs=[2, 20];nonnegative initial pair=[2, 20]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[2, 20, 0, 2], [20, 2, 10, 0]];terminal gcd=2
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S008
S010 · implies
操作前
Euler residue representative3:ORIGINAL gcd inputs=[3, 20];nonnegative initial pair=[3, 20]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[3, 20, 0, 3], [20, 3, 6, 2], [3, 2, 1, 1], [2, 1, 2, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S009
S011 · implies
操作前
Euler residue representative4:ORIGINAL gcd inputs=[4, 20];nonnegative initial pair=[4, 20]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[4, 20, 0, 4], [20, 4, 5, 0]];terminal gcd=4
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S010
S012 · implies
操作前
Euler residue representative5:ORIGINAL gcd inputs=[5, 20];nonnegative initial pair=[5, 20]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[5, 20, 0, 5], [20, 5, 4, 0]];terminal gcd=5
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S011
S013 · implies
操作前
Euler residue representative6:ORIGINAL gcd inputs=[6, 20];nonnegative initial pair=[6, 20]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[6, 20, 0, 6], [20, 6, 3, 2], [6, 2, 3, 0]];terminal gcd=2
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S012
S014 · implies
操作前
Euler residue representative7:ORIGINAL gcd inputs=[7, 20];nonnegative initial pair=[7, 20]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[7, 20, 0, 7], [20, 7, 2, 6], [7, 6, 1, 1], [6, 1, 6, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S013
S015 · implies
操作前
Euler residue representative8:ORIGINAL gcd inputs=[8, 20];nonnegative initial pair=[8, 20]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[8, 20, 0, 8], [20, 8, 2, 4], [8, 4, 2, 0]];terminal gcd=4
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S014
S016 · implies
操作前
Euler residue representative9:ORIGINAL gcd inputs=[9, 20];nonnegative initial pair=[9, 20]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[9, 20, 0, 9], [20, 9, 2, 2], [9, 2, 4, 1], [2, 1, 2, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S015
S017 · implies
操作前
Euler residue representative10:ORIGINAL gcd inputs=[10, 20];nonnegative initial pair=[10, 20]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[10, 20, 0, 10], [20, 10, 2, 0]];terminal gcd=10
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S016
S018 · implies
操作前
Euler residue representative11:ORIGINAL gcd inputs=[11, 20];nonnegative initial pair=[11, 20]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[11, 20, 0, 11], [20, 11, 1, 9], [11, 9, 1, 2], [9, 2, 4, 1], [2, 1, 2, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S017
S019 · implies
操作前
Euler residue representative12:ORIGINAL gcd inputs=[12, 20];nonnegative initial pair=[12, 20]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[12, 20, 0, 12], [20, 12, 1, 8], [12, 8, 1, 4], [8, 4, 2, 0]];terminal gcd=4
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S018
S020 · implies
操作前
Euler residue representative13:ORIGINAL gcd inputs=[13, 20];nonnegative initial pair=[13, 20]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[13, 20, 0, 13], [20, 13, 1, 7], [13, 7, 1, 6], [7, 6, 1, 1], [6, 1, 6, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S019
S021 · implies
操作前
Euler residue representative14:ORIGINAL gcd inputs=[14, 20];nonnegative initial pair=[14, 20]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[14, 20, 0, 14], [20, 14, 1, 6], [14, 6, 2, 2], [6, 2, 3, 0]];terminal gcd=2
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S020
S022 · implies
操作前
Euler residue representative15:ORIGINAL gcd inputs=[15, 20];nonnegative initial pair=[15, 20]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[15, 20, 0, 15], [20, 15, 1, 5], [15, 5, 3, 0]];terminal gcd=5
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S021
S023 · implies
操作前
Euler residue representative16:ORIGINAL gcd inputs=[16, 20];nonnegative initial pair=[16, 20]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[16, 20, 0, 16], [20, 16, 1, 4], [16, 4, 4, 0]];terminal gcd=4
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S022
S024 · implies
操作前
Euler residue representative17:ORIGINAL gcd inputs=[17, 20];nonnegative initial pair=[17, 20]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[17, 20, 0, 17], [20, 17, 1, 3], [17, 3, 5, 2], [3, 2, 1, 1], [2, 1, 2, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S023
S025 · implies
操作前
Euler residue representative18:ORIGINAL gcd inputs=[18, 20];nonnegative initial pair=[18, 20]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[18, 20, 0, 18], [20, 18, 1, 2], [18, 2, 9, 0]];terminal gcd=2
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S024
S026 · implies
操作前
Euler residue representative19:ORIGINAL gcd inputs=[19, 20];nonnegative initial pair=[19, 20]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[19, 20, 0, 19], [20, 19, 1, 1], [19, 1, 19, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S025
S027 · calculation
操作前
Euler complete reduced residue count phi := sum(1, 1, 1, 1, 1, 1, 1, 1)
操作後
Euler complete reduced residue count phi = 8
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S026
S028 · implies
操作前
COMPLETE original residue carrier0..19;ALL [representative,gcd,unit] rows=[[0, 20, 否], [1, 1, 是], [2, 2, 否], [3, 1, 是], [4, 4, 否], [5, 5, 否], [6, 2, 否], [7, 1, 是], [8, 4, 否], [9, 1, 是], [10, 10, 否], [11, 1, 是], [12, 4, 否], [13, 1, 是], [14, 2, 否], [15, 5, 否], [16, 4, 否], [17, 1, 是], [18, 2, 否], [19, 1, 是]]
操作後
increasing COMPLETE U(n)=[1, 3, 7, 9, 11, 13, 17, 19];phi(n)=8;source count over1..n agrees because0 and n are BOTH nonunits for n>=2
條件:無
逐所有代表判gcd1而得完整單位元集合,1必在其中。來源φ用1..n而unit list用0..n−1;因n≥2,換出的0與n都非單位元,計數一致,不擅自把n當prime。
步驟識別與依賴
規則:euler_full_units_totient_count_convention_not_prime_only · 依賴:G001, S027
S029 · calculation
操作前
Euler ACTUAL base-unit inverse product := mul(17, 13)
操作後
Euler ACTUAL base-unit inverse product = 221
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S028
S030 · calculation
操作前
Euler ACTUAL inverse check exact quotient := div(221, 20)
操作後
Euler ACTUAL inverse check exact quotient = 221/20
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S029
S031 · calculation
操作前
Euler ACTUAL inverse check floor quotient multiple := mul(11, 20)
操作後
Euler ACTUAL inverse check floor quotient multiple = 220
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S030
S032 · calculation
操作前
Euler ACTUAL inverse check normalized remainder := sub(221, 220)
操作後
Euler ACTUAL inverse check normalized remainder = 1
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S031
S033 · implies
操作前
Euler ACTUAL inverse check:ORIGINAL signed integer=221;modulus=20;exact ratio=221/20;floor quotient=11
操作後
value=q*n+remainder;normalized residue=1 in[0,20);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S032
S034 · implies
操作前
ACTUAL modulus n=20;gcd(original a=17,n)=1;normalized base=17;ACTUAL inverse=13;COMPLETE U(n)=[1, 3, 7, 9, 11, 13, 17, 19]
操作後
for ANY r in U(n),a*r remains a unit;actual inverse makes multiplication injective;finite self-injection on U(n) is surjective,so a*U(n)=U(n)
條件:無
單位元乘積的inverse可由反序inverse相乘給出,故乘a留U(n);用a的真inverse消去得單射,有限同載體推出滿射。n可以是合數;不能把全部非零residue當單位元。
步驟識別與依賴
規則:euler_all_unit_residue_permutation_composite_allowed · 依賴:G001, S033
S035 · calculation
操作前
Euler ORIGINAL a times unit representative1 := mul(17, 1)
操作後
Euler ORIGINAL a times unit representative1 = 17
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S034
S036 · calculation
操作前
Euler unit representative1 raw image exact quotient := div(17, 20)
操作後
Euler unit representative1 raw image exact quotient = 17/20
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S035
S037 · calculation
操作前
Euler unit representative1 raw image floor quotient multiple := mul(0, 20)
操作後
Euler unit representative1 raw image floor quotient multiple = 0
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S036
S038 · calculation
操作前
Euler unit representative1 raw image normalized remainder := sub(17, 0)
操作後
Euler unit representative1 raw image normalized remainder = 17
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S037
S039 · implies
操作前
Euler unit representative1 raw image:ORIGINAL signed integer=17;modulus=20;exact ratio=17/20;floor quotient=0
操作後
value=q*n+remainder;normalized residue=17 in[0,20);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S038
S040 · calculation
操作前
Euler ORIGINAL a times unit representative3 := mul(17, 3)
操作後
Euler ORIGINAL a times unit representative3 = 51
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S039
S041 · calculation
操作前
Euler unit representative3 raw image exact quotient := div(51, 20)
操作後
Euler unit representative3 raw image exact quotient = 51/20
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S040
S042 · calculation
操作前
Euler unit representative3 raw image floor quotient multiple := mul(2, 20)
操作後
Euler unit representative3 raw image floor quotient multiple = 40
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S041
S043 · calculation
操作前
Euler unit representative3 raw image normalized remainder := sub(51, 40)
操作後
Euler unit representative3 raw image normalized remainder = 11
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S042
S044 · implies
操作前
Euler unit representative3 raw image:ORIGINAL signed integer=51;modulus=20;exact ratio=51/20;floor quotient=2
操作後
value=q*n+remainder;normalized residue=11 in[0,20);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S043
S045 · calculation
操作前
Euler ORIGINAL a times unit representative7 := mul(17, 7)
操作後
Euler ORIGINAL a times unit representative7 = 119
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S044
S046 · calculation
操作前
Euler unit representative7 raw image exact quotient := div(119, 20)
操作後
Euler unit representative7 raw image exact quotient = 119/20
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S045
S047 · calculation
操作前
Euler unit representative7 raw image floor quotient multiple := mul(5, 20)
操作後
Euler unit representative7 raw image floor quotient multiple = 100
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S046
S048 · calculation
操作前
Euler unit representative7 raw image normalized remainder := sub(119, 100)
操作後
Euler unit representative7 raw image normalized remainder = 19
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S047
S049 · implies
操作前
Euler unit representative7 raw image:ORIGINAL signed integer=119;modulus=20;exact ratio=119/20;floor quotient=5
操作後
value=q*n+remainder;normalized residue=19 in[0,20);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S048
S050 · calculation
操作前
Euler ORIGINAL a times unit representative9 := mul(17, 9)
操作後
Euler ORIGINAL a times unit representative9 = 153
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S049
S051 · calculation
操作前
Euler unit representative9 raw image exact quotient := div(153, 20)
操作後
Euler unit representative9 raw image exact quotient = 153/20
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S050
S052 · calculation
操作前
Euler unit representative9 raw image floor quotient multiple := mul(7, 20)
操作後
Euler unit representative9 raw image floor quotient multiple = 140
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S051
S053 · calculation
操作前
Euler unit representative9 raw image normalized remainder := sub(153, 140)
操作後
Euler unit representative9 raw image normalized remainder = 13
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S052
S054 · implies
操作前
Euler unit representative9 raw image:ORIGINAL signed integer=153;modulus=20;exact ratio=153/20;floor quotient=7
操作後
value=q*n+remainder;normalized residue=13 in[0,20);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S053
S055 · calculation
操作前
Euler ORIGINAL a times unit representative11 := mul(17, 11)
操作後
Euler ORIGINAL a times unit representative11 = 187
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S054
S056 · calculation
操作前
Euler unit representative11 raw image exact quotient := div(187, 20)
操作後
Euler unit representative11 raw image exact quotient = 187/20
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S055
S057 · calculation
操作前
Euler unit representative11 raw image floor quotient multiple := mul(9, 20)
操作後
Euler unit representative11 raw image floor quotient multiple = 180
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S056
S058 · calculation
操作前
Euler unit representative11 raw image normalized remainder := sub(187, 180)
操作後
Euler unit representative11 raw image normalized remainder = 7
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S057
S059 · implies
操作前
Euler unit representative11 raw image:ORIGINAL signed integer=187;modulus=20;exact ratio=187/20;floor quotient=9
操作後
value=q*n+remainder;normalized residue=7 in[0,20);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S058
S060 · calculation
操作前
Euler ORIGINAL a times unit representative13 := mul(17, 13)
操作後
Euler ORIGINAL a times unit representative13 = 221
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S059
S061 · calculation
操作前
Euler unit representative13 raw image exact quotient := div(221, 20)
操作後
Euler unit representative13 raw image exact quotient = 221/20
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S060
S062 · calculation
操作前
Euler unit representative13 raw image floor quotient multiple := mul(11, 20)
操作後
Euler unit representative13 raw image floor quotient multiple = 220
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S061
S063 · calculation
操作前
Euler unit representative13 raw image normalized remainder := sub(221, 220)
操作後
Euler unit representative13 raw image normalized remainder = 1
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S062
S064 · implies
操作前
Euler unit representative13 raw image:ORIGINAL signed integer=221;modulus=20;exact ratio=221/20;floor quotient=11
操作後
value=q*n+remainder;normalized residue=1 in[0,20);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S063
S065 · calculation
操作前
Euler ORIGINAL a times unit representative17 := mul(17, 17)
操作後
Euler ORIGINAL a times unit representative17 = 289
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S064
S066 · calculation
操作前
Euler unit representative17 raw image exact quotient := div(289, 20)
操作後
Euler unit representative17 raw image exact quotient = 289/20
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S065
S067 · calculation
操作前
Euler unit representative17 raw image floor quotient multiple := mul(14, 20)
操作後
Euler unit representative17 raw image floor quotient multiple = 280
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S066
S068 · calculation
操作前
Euler unit representative17 raw image normalized remainder := sub(289, 280)
操作後
Euler unit representative17 raw image normalized remainder = 9
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S067
S069 · implies
操作前
Euler unit representative17 raw image:ORIGINAL signed integer=289;modulus=20;exact ratio=289/20;floor quotient=14
操作後
value=q*n+remainder;normalized residue=9 in[0,20);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S068
S070 · calculation
操作前
Euler ORIGINAL a times unit representative19 := mul(17, 19)
操作後
Euler ORIGINAL a times unit representative19 = 323
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S069
S071 · calculation
操作前
Euler unit representative19 raw image exact quotient := div(323, 20)
操作後
Euler unit representative19 raw image exact quotient = 323/20
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S070
S072 · calculation
操作前
Euler unit representative19 raw image floor quotient multiple := mul(16, 20)
操作後
Euler unit representative19 raw image floor quotient multiple = 320
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S071
S073 · calculation
操作前
Euler unit representative19 raw image normalized remainder := sub(323, 320)
操作後
Euler unit representative19 raw image normalized remainder = 3
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S072
S074 · implies
操作前
Euler unit representative19 raw image:ORIGINAL signed integer=323;modulus=20;exact ratio=323/20;floor quotient=16
操作後
value=q*n+remainder;normalized residue=3 in[0,20);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S073
S075 · implies
操作前
COMPLETE original increasing U(n)=[1, 3, 7, 9, 11, 13, 17, 19];actual images in ORIGINAL unit order=[17, 11, 19, 13, 7, 1, 9, 3]
操作後
SOURCE output sorts the mapped list numerically=[1, 3, 7, 9, 11, 13, 17, 19];full-list equality=是;not a claim each point is fixed
條件:無
來源第二欄是排序後的完整像清單,非原unit順序的逐點像;相等證permutation,不代表乘a是identity。原始點像在本步另列,不靜默混同。
步驟識別與依賴
規則:euler_sorted_mapped_units_not_original_image_order_or_identity · 依賴:G001, S074