逐步推導
S001 · implies
操作前
source operation=eulerthm-unit-permutation;original snapshot and mathematics retained
操作後
explicit ordered source output fields=[units, sorted_mapped_units, permutation, certificate]
條件:無
原題快照保留歷史介面標記;本頁直接列來源欄位順序,不需JavaScript或外部表。欄位標籤不是額外數學證據,No保持原題的聲稱範圍。
步驟識別與依賴
規則:source_ordered_interface_explicit_without_javascript · 依賴:G001
S002 · calculation
操作前
Euler ORIGINAL signed base normalization exact quotient := div(20, 23)
操作後
Euler ORIGINAL signed base normalization exact quotient = 20/23
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S001
S003 · calculation
操作前
Euler ORIGINAL signed base normalization floor quotient multiple := mul(0, 23)
操作後
Euler ORIGINAL signed base normalization floor quotient multiple = 0
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S002
S004 · calculation
操作前
Euler ORIGINAL signed base normalization normalized remainder := sub(20, 0)
操作後
Euler ORIGINAL signed base normalization normalized remainder = 20
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S003
S005 · implies
操作前
Euler ORIGINAL signed base normalization:ORIGINAL signed integer=20;modulus=23;exact ratio=20/23;floor quotient=0
操作後
value=q*n+remainder;normalized residue=20 in[0,23);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S004
S006 · implies
操作前
Euler ORIGINAL base applicability gcd:ORIGINAL gcd inputs=[20, 23];nonnegative initial pair=[20, 23]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[20, 23, 0, 20], [23, 20, 1, 3], [20, 3, 6, 2], [3, 2, 1, 1], [2, 1, 2, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S005
S007 · implies
操作前
Euler residue representative0:ORIGINAL gcd inputs=[0, 23];nonnegative initial pair=[0, 23]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[0, 23, 0, 0]];terminal gcd=23
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S006
S008 · implies
操作前
Euler residue representative1:ORIGINAL gcd inputs=[1, 23];nonnegative initial pair=[1, 23]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[1, 23, 0, 1], [23, 1, 23, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S007
S009 · implies
操作前
Euler residue representative2:ORIGINAL gcd inputs=[2, 23];nonnegative initial pair=[2, 23]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[2, 23, 0, 2], [23, 2, 11, 1], [2, 1, 2, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S008
S010 · implies
操作前
Euler residue representative3:ORIGINAL gcd inputs=[3, 23];nonnegative initial pair=[3, 23]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[3, 23, 0, 3], [23, 3, 7, 2], [3, 2, 1, 1], [2, 1, 2, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S009
S011 · implies
操作前
Euler residue representative4:ORIGINAL gcd inputs=[4, 23];nonnegative initial pair=[4, 23]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[4, 23, 0, 4], [23, 4, 5, 3], [4, 3, 1, 1], [3, 1, 3, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S010
S012 · implies
操作前
Euler residue representative5:ORIGINAL gcd inputs=[5, 23];nonnegative initial pair=[5, 23]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[5, 23, 0, 5], [23, 5, 4, 3], [5, 3, 1, 2], [3, 2, 1, 1], [2, 1, 2, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S011
S013 · implies
操作前
Euler residue representative6:ORIGINAL gcd inputs=[6, 23];nonnegative initial pair=[6, 23]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[6, 23, 0, 6], [23, 6, 3, 5], [6, 5, 1, 1], [5, 1, 5, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S012
S014 · implies
操作前
Euler residue representative7:ORIGINAL gcd inputs=[7, 23];nonnegative initial pair=[7, 23]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[7, 23, 0, 7], [23, 7, 3, 2], [7, 2, 3, 1], [2, 1, 2, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S013
S015 · implies
操作前
Euler residue representative8:ORIGINAL gcd inputs=[8, 23];nonnegative initial pair=[8, 23]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[8, 23, 0, 8], [23, 8, 2, 7], [8, 7, 1, 1], [7, 1, 7, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S014
S016 · implies
操作前
Euler residue representative9:ORIGINAL gcd inputs=[9, 23];nonnegative initial pair=[9, 23]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[9, 23, 0, 9], [23, 9, 2, 5], [9, 5, 1, 4], [5, 4, 1, 1], [4, 1, 4, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S015
S017 · implies
操作前
Euler residue representative10:ORIGINAL gcd inputs=[10, 23];nonnegative initial pair=[10, 23]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[10, 23, 0, 10], [23, 10, 2, 3], [10, 3, 3, 1], [3, 1, 3, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S016
S018 · implies
操作前
Euler residue representative11:ORIGINAL gcd inputs=[11, 23];nonnegative initial pair=[11, 23]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[11, 23, 0, 11], [23, 11, 2, 1], [11, 1, 11, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S017
S019 · implies
操作前
Euler residue representative12:ORIGINAL gcd inputs=[12, 23];nonnegative initial pair=[12, 23]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[12, 23, 0, 12], [23, 12, 1, 11], [12, 11, 1, 1], [11, 1, 11, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S018
S020 · implies
操作前
Euler residue representative13:ORIGINAL gcd inputs=[13, 23];nonnegative initial pair=[13, 23]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[13, 23, 0, 13], [23, 13, 1, 10], [13, 10, 1, 3], [10, 3, 3, 1], [3, 1, 3, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S019
S021 · implies
操作前
Euler residue representative14:ORIGINAL gcd inputs=[14, 23];nonnegative initial pair=[14, 23]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[14, 23, 0, 14], [23, 14, 1, 9], [14, 9, 1, 5], [9, 5, 1, 4], [5, 4, 1, 1], [4, 1, 4, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S020
S022 · implies
操作前
Euler residue representative15:ORIGINAL gcd inputs=[15, 23];nonnegative initial pair=[15, 23]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[15, 23, 0, 15], [23, 15, 1, 8], [15, 8, 1, 7], [8, 7, 1, 1], [7, 1, 7, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S021
S023 · implies
操作前
Euler residue representative16:ORIGINAL gcd inputs=[16, 23];nonnegative initial pair=[16, 23]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[16, 23, 0, 16], [23, 16, 1, 7], [16, 7, 2, 2], [7, 2, 3, 1], [2, 1, 2, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S022
S024 · implies
操作前
Euler residue representative17:ORIGINAL gcd inputs=[17, 23];nonnegative initial pair=[17, 23]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[17, 23, 0, 17], [23, 17, 1, 6], [17, 6, 2, 5], [6, 5, 1, 1], [5, 1, 5, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S023
S025 · implies
操作前
Euler residue representative18:ORIGINAL gcd inputs=[18, 23];nonnegative initial pair=[18, 23]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[18, 23, 0, 18], [23, 18, 1, 5], [18, 5, 3, 3], [5, 3, 1, 2], [3, 2, 1, 1], [2, 1, 2, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S024
S026 · implies
操作前
Euler residue representative19:ORIGINAL gcd inputs=[19, 23];nonnegative initial pair=[19, 23]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[19, 23, 0, 19], [23, 19, 1, 4], [19, 4, 4, 3], [4, 3, 1, 1], [3, 1, 3, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S025
S027 · implies
操作前
Euler residue representative20:ORIGINAL gcd inputs=[20, 23];nonnegative initial pair=[20, 23]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[20, 23, 0, 20], [23, 20, 1, 3], [20, 3, 6, 2], [3, 2, 1, 1], [2, 1, 2, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S026
S028 · implies
操作前
Euler residue representative21:ORIGINAL gcd inputs=[21, 23];nonnegative initial pair=[21, 23]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[21, 23, 0, 21], [23, 21, 1, 2], [21, 2, 10, 1], [2, 1, 2, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S027
S029 · implies
操作前
Euler residue representative22:ORIGINAL gcd inputs=[22, 23];nonnegative initial pair=[22, 23]
操作後
ALL exact Euclidean rows[left,right,q,r]=[[22, 23, 0, 22], [23, 22, 1, 1], [22, 1, 22, 0]];terminal gcd=1
條件:無
每列left=q·right+r且0≤r<正right,餘數替換保共同因數集並嚴格下降,終端給gcd;包含gcd(0,n)=n,不除以0。
步驟識別與依賴
規則:euler_gcd_full_remainder_chain_unit_test · 依賴:G001, S028
S030 · calculation
操作前
Euler complete reduced residue count phi := sum(1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1)
操作後
Euler complete reduced residue count phi = 22
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S029
S031 · implies
操作前
COMPLETE original residue carrier0..22;ALL [representative,gcd,unit] rows=[[0, 23, 否], [1, 1, 是], [2, 1, 是], [3, 1, 是], [4, 1, 是], [5, 1, 是], [6, 1, 是], [7, 1, 是], [8, 1, 是], [9, 1, 是], [10, 1, 是], [11, 1, 是], [12, 1, 是], [13, 1, 是], [14, 1, 是], [15, 1, 是], [16, 1, 是], [17, 1, 是], [18, 1, 是], [19, 1, 是], [20, 1, 是], [21, 1, 是], [22, 1, 是]]
操作後
increasing COMPLETE U(n)=[1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22];phi(n)=22;source count over1..n agrees because0 and n are BOTH nonunits for n>=2
條件:無
逐所有代表判gcd1而得完整單位元集合,1必在其中。來源φ用1..n而unit list用0..n−1;因n≥2,換出的0與n都非單位元,計數一致,不擅自把n當prime。
步驟識別與依賴
規則:euler_full_units_totient_count_convention_not_prime_only · 依賴:G001, S030
S032 · calculation
操作前
Euler ACTUAL base-unit inverse product := mul(20, 15)
操作後
Euler ACTUAL base-unit inverse product = 300
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S031
S033 · calculation
操作前
Euler ACTUAL inverse check exact quotient := div(300, 23)
操作後
Euler ACTUAL inverse check exact quotient = 300/23
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S032
S034 · calculation
操作前
Euler ACTUAL inverse check floor quotient multiple := mul(13, 23)
操作後
Euler ACTUAL inverse check floor quotient multiple = 299
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S033
S035 · calculation
操作前
Euler ACTUAL inverse check normalized remainder := sub(300, 299)
操作後
Euler ACTUAL inverse check normalized remainder = 1
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S034
S036 · implies
操作前
Euler ACTUAL inverse check:ORIGINAL signed integer=300;modulus=23;exact ratio=300/23;floor quotient=13
操作後
value=q*n+remainder;normalized residue=1 in[0,23);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S035
S037 · implies
操作前
ACTUAL modulus n=23;gcd(original a=20,n)=1;normalized base=20;ACTUAL inverse=15;COMPLETE U(n)=[1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22]
操作後
for ANY r in U(n),a*r remains a unit;actual inverse makes multiplication injective;finite self-injection on U(n) is surjective,so a*U(n)=U(n)
條件:無
單位元乘積的inverse可由反序inverse相乘給出,故乘a留U(n);用a的真inverse消去得單射,有限同載體推出滿射。n可以是合數;不能把全部非零residue當單位元。
步驟識別與依賴
規則:euler_all_unit_residue_permutation_composite_allowed · 依賴:G001, S036
S038 · calculation
操作前
Euler ORIGINAL a times unit representative1 := mul(20, 1)
操作後
Euler ORIGINAL a times unit representative1 = 20
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S037
S039 · calculation
操作前
Euler unit representative1 raw image exact quotient := div(20, 23)
操作後
Euler unit representative1 raw image exact quotient = 20/23
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S038
S040 · calculation
操作前
Euler unit representative1 raw image floor quotient multiple := mul(0, 23)
操作後
Euler unit representative1 raw image floor quotient multiple = 0
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S039
S041 · calculation
操作前
Euler unit representative1 raw image normalized remainder := sub(20, 0)
操作後
Euler unit representative1 raw image normalized remainder = 20
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S040
S042 · implies
操作前
Euler unit representative1 raw image:ORIGINAL signed integer=20;modulus=23;exact ratio=20/23;floor quotient=0
操作後
value=q*n+remainder;normalized residue=20 in[0,23);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S041
S043 · calculation
操作前
Euler ORIGINAL a times unit representative2 := mul(20, 2)
操作後
Euler ORIGINAL a times unit representative2 = 40
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S042
S044 · calculation
操作前
Euler unit representative2 raw image exact quotient := div(40, 23)
操作後
Euler unit representative2 raw image exact quotient = 40/23
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S043
S045 · calculation
操作前
Euler unit representative2 raw image floor quotient multiple := mul(1, 23)
操作後
Euler unit representative2 raw image floor quotient multiple = 23
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S044
S046 · calculation
操作前
Euler unit representative2 raw image normalized remainder := sub(40, 23)
操作後
Euler unit representative2 raw image normalized remainder = 17
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S045
S047 · implies
操作前
Euler unit representative2 raw image:ORIGINAL signed integer=40;modulus=23;exact ratio=40/23;floor quotient=1
操作後
value=q*n+remainder;normalized residue=17 in[0,23);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S046
S048 · calculation
操作前
Euler ORIGINAL a times unit representative3 := mul(20, 3)
操作後
Euler ORIGINAL a times unit representative3 = 60
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S047
S049 · calculation
操作前
Euler unit representative3 raw image exact quotient := div(60, 23)
操作後
Euler unit representative3 raw image exact quotient = 60/23
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S048
S050 · calculation
操作前
Euler unit representative3 raw image floor quotient multiple := mul(2, 23)
操作後
Euler unit representative3 raw image floor quotient multiple = 46
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S049
S051 · calculation
操作前
Euler unit representative3 raw image normalized remainder := sub(60, 46)
操作後
Euler unit representative3 raw image normalized remainder = 14
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S050
S052 · implies
操作前
Euler unit representative3 raw image:ORIGINAL signed integer=60;modulus=23;exact ratio=60/23;floor quotient=2
操作後
value=q*n+remainder;normalized residue=14 in[0,23);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S051
S053 · calculation
操作前
Euler ORIGINAL a times unit representative4 := mul(20, 4)
操作後
Euler ORIGINAL a times unit representative4 = 80
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S052
S054 · calculation
操作前
Euler unit representative4 raw image exact quotient := div(80, 23)
操作後
Euler unit representative4 raw image exact quotient = 80/23
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S053
S055 · calculation
操作前
Euler unit representative4 raw image floor quotient multiple := mul(3, 23)
操作後
Euler unit representative4 raw image floor quotient multiple = 69
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S054
S056 · calculation
操作前
Euler unit representative4 raw image normalized remainder := sub(80, 69)
操作後
Euler unit representative4 raw image normalized remainder = 11
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S055
S057 · implies
操作前
Euler unit representative4 raw image:ORIGINAL signed integer=80;modulus=23;exact ratio=80/23;floor quotient=3
操作後
value=q*n+remainder;normalized residue=11 in[0,23);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S056
S058 · calculation
操作前
Euler ORIGINAL a times unit representative5 := mul(20, 5)
操作後
Euler ORIGINAL a times unit representative5 = 100
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S057
S059 · calculation
操作前
Euler unit representative5 raw image exact quotient := div(100, 23)
操作後
Euler unit representative5 raw image exact quotient = 100/23
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S058
S060 · calculation
操作前
Euler unit representative5 raw image floor quotient multiple := mul(4, 23)
操作後
Euler unit representative5 raw image floor quotient multiple = 92
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S059
S061 · calculation
操作前
Euler unit representative5 raw image normalized remainder := sub(100, 92)
操作後
Euler unit representative5 raw image normalized remainder = 8
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S060
S062 · implies
操作前
Euler unit representative5 raw image:ORIGINAL signed integer=100;modulus=23;exact ratio=100/23;floor quotient=4
操作後
value=q*n+remainder;normalized residue=8 in[0,23);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S061
S063 · calculation
操作前
Euler ORIGINAL a times unit representative6 := mul(20, 6)
操作後
Euler ORIGINAL a times unit representative6 = 120
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S062
S064 · calculation
操作前
Euler unit representative6 raw image exact quotient := div(120, 23)
操作後
Euler unit representative6 raw image exact quotient = 120/23
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S063
S065 · calculation
操作前
Euler unit representative6 raw image floor quotient multiple := mul(5, 23)
操作後
Euler unit representative6 raw image floor quotient multiple = 115
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S064
S066 · calculation
操作前
Euler unit representative6 raw image normalized remainder := sub(120, 115)
操作後
Euler unit representative6 raw image normalized remainder = 5
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S065
S067 · implies
操作前
Euler unit representative6 raw image:ORIGINAL signed integer=120;modulus=23;exact ratio=120/23;floor quotient=5
操作後
value=q*n+remainder;normalized residue=5 in[0,23);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S066
S068 · calculation
操作前
Euler ORIGINAL a times unit representative7 := mul(20, 7)
操作後
Euler ORIGINAL a times unit representative7 = 140
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S067
S069 · calculation
操作前
Euler unit representative7 raw image exact quotient := div(140, 23)
操作後
Euler unit representative7 raw image exact quotient = 140/23
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S068
S070 · calculation
操作前
Euler unit representative7 raw image floor quotient multiple := mul(6, 23)
操作後
Euler unit representative7 raw image floor quotient multiple = 138
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S069
S071 · calculation
操作前
Euler unit representative7 raw image normalized remainder := sub(140, 138)
操作後
Euler unit representative7 raw image normalized remainder = 2
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S070
S072 · implies
操作前
Euler unit representative7 raw image:ORIGINAL signed integer=140;modulus=23;exact ratio=140/23;floor quotient=6
操作後
value=q*n+remainder;normalized residue=2 in[0,23);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S071
S073 · calculation
操作前
Euler ORIGINAL a times unit representative8 := mul(20, 8)
操作後
Euler ORIGINAL a times unit representative8 = 160
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S072
S074 · calculation
操作前
Euler unit representative8 raw image exact quotient := div(160, 23)
操作後
Euler unit representative8 raw image exact quotient = 160/23
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S073
S075 · calculation
操作前
Euler unit representative8 raw image floor quotient multiple := mul(6, 23)
操作後
Euler unit representative8 raw image floor quotient multiple = 138
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S074
S076 · calculation
操作前
Euler unit representative8 raw image normalized remainder := sub(160, 138)
操作後
Euler unit representative8 raw image normalized remainder = 22
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S075
S077 · implies
操作前
Euler unit representative8 raw image:ORIGINAL signed integer=160;modulus=23;exact ratio=160/23;floor quotient=6
操作後
value=q*n+remainder;normalized residue=22 in[0,23);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S076
S078 · calculation
操作前
Euler ORIGINAL a times unit representative9 := mul(20, 9)
操作後
Euler ORIGINAL a times unit representative9 = 180
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S077
S079 · calculation
操作前
Euler unit representative9 raw image exact quotient := div(180, 23)
操作後
Euler unit representative9 raw image exact quotient = 180/23
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S078
S080 · calculation
操作前
Euler unit representative9 raw image floor quotient multiple := mul(7, 23)
操作後
Euler unit representative9 raw image floor quotient multiple = 161
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S079
S081 · calculation
操作前
Euler unit representative9 raw image normalized remainder := sub(180, 161)
操作後
Euler unit representative9 raw image normalized remainder = 19
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S080
S082 · implies
操作前
Euler unit representative9 raw image:ORIGINAL signed integer=180;modulus=23;exact ratio=180/23;floor quotient=7
操作後
value=q*n+remainder;normalized residue=19 in[0,23);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S081
S083 · calculation
操作前
Euler ORIGINAL a times unit representative10 := mul(20, 10)
操作後
Euler ORIGINAL a times unit representative10 = 200
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S082
S084 · calculation
操作前
Euler unit representative10 raw image exact quotient := div(200, 23)
操作後
Euler unit representative10 raw image exact quotient = 200/23
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S083
S085 · calculation
操作前
Euler unit representative10 raw image floor quotient multiple := mul(8, 23)
操作後
Euler unit representative10 raw image floor quotient multiple = 184
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S084
S086 · calculation
操作前
Euler unit representative10 raw image normalized remainder := sub(200, 184)
操作後
Euler unit representative10 raw image normalized remainder = 16
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S085
S087 · implies
操作前
Euler unit representative10 raw image:ORIGINAL signed integer=200;modulus=23;exact ratio=200/23;floor quotient=8
操作後
value=q*n+remainder;normalized residue=16 in[0,23);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S086
S088 · calculation
操作前
Euler ORIGINAL a times unit representative11 := mul(20, 11)
操作後
Euler ORIGINAL a times unit representative11 = 220
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S087
S089 · calculation
操作前
Euler unit representative11 raw image exact quotient := div(220, 23)
操作後
Euler unit representative11 raw image exact quotient = 220/23
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S088
S090 · calculation
操作前
Euler unit representative11 raw image floor quotient multiple := mul(9, 23)
操作後
Euler unit representative11 raw image floor quotient multiple = 207
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S089
S091 · calculation
操作前
Euler unit representative11 raw image normalized remainder := sub(220, 207)
操作後
Euler unit representative11 raw image normalized remainder = 13
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S090
S092 · implies
操作前
Euler unit representative11 raw image:ORIGINAL signed integer=220;modulus=23;exact ratio=220/23;floor quotient=9
操作後
value=q*n+remainder;normalized residue=13 in[0,23);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S091
S093 · calculation
操作前
Euler ORIGINAL a times unit representative12 := mul(20, 12)
操作後
Euler ORIGINAL a times unit representative12 = 240
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S092
S094 · calculation
操作前
Euler unit representative12 raw image exact quotient := div(240, 23)
操作後
Euler unit representative12 raw image exact quotient = 240/23
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S093
S095 · calculation
操作前
Euler unit representative12 raw image floor quotient multiple := mul(10, 23)
操作後
Euler unit representative12 raw image floor quotient multiple = 230
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S094
S096 · calculation
操作前
Euler unit representative12 raw image normalized remainder := sub(240, 230)
操作後
Euler unit representative12 raw image normalized remainder = 10
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S095
S097 · implies
操作前
Euler unit representative12 raw image:ORIGINAL signed integer=240;modulus=23;exact ratio=240/23;floor quotient=10
操作後
value=q*n+remainder;normalized residue=10 in[0,23);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S096
S098 · calculation
操作前
Euler ORIGINAL a times unit representative13 := mul(20, 13)
操作後
Euler ORIGINAL a times unit representative13 = 260
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S097
S099 · calculation
操作前
Euler unit representative13 raw image exact quotient := div(260, 23)
操作後
Euler unit representative13 raw image exact quotient = 260/23
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S098
S100 · calculation
操作前
Euler unit representative13 raw image floor quotient multiple := mul(11, 23)
操作後
Euler unit representative13 raw image floor quotient multiple = 253
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S099
S101 · calculation
操作前
Euler unit representative13 raw image normalized remainder := sub(260, 253)
操作後
Euler unit representative13 raw image normalized remainder = 7
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S100
S102 · implies
操作前
Euler unit representative13 raw image:ORIGINAL signed integer=260;modulus=23;exact ratio=260/23;floor quotient=11
操作後
value=q*n+remainder;normalized residue=7 in[0,23);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S101
S103 · calculation
操作前
Euler ORIGINAL a times unit representative14 := mul(20, 14)
操作後
Euler ORIGINAL a times unit representative14 = 280
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S102
S104 · calculation
操作前
Euler unit representative14 raw image exact quotient := div(280, 23)
操作後
Euler unit representative14 raw image exact quotient = 280/23
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S103
S105 · calculation
操作前
Euler unit representative14 raw image floor quotient multiple := mul(12, 23)
操作後
Euler unit representative14 raw image floor quotient multiple = 276
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S104
S106 · calculation
操作前
Euler unit representative14 raw image normalized remainder := sub(280, 276)
操作後
Euler unit representative14 raw image normalized remainder = 4
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S105
S107 · implies
操作前
Euler unit representative14 raw image:ORIGINAL signed integer=280;modulus=23;exact ratio=280/23;floor quotient=12
操作後
value=q*n+remainder;normalized residue=4 in[0,23);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S106
S108 · calculation
操作前
Euler ORIGINAL a times unit representative15 := mul(20, 15)
操作後
Euler ORIGINAL a times unit representative15 = 300
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S107
S109 · calculation
操作前
Euler unit representative15 raw image exact quotient := div(300, 23)
操作後
Euler unit representative15 raw image exact quotient = 300/23
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S108
S110 · calculation
操作前
Euler unit representative15 raw image floor quotient multiple := mul(13, 23)
操作後
Euler unit representative15 raw image floor quotient multiple = 299
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S109
S111 · calculation
操作前
Euler unit representative15 raw image normalized remainder := sub(300, 299)
操作後
Euler unit representative15 raw image normalized remainder = 1
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S110
S112 · implies
操作前
Euler unit representative15 raw image:ORIGINAL signed integer=300;modulus=23;exact ratio=300/23;floor quotient=13
操作後
value=q*n+remainder;normalized residue=1 in[0,23);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S111
S113 · calculation
操作前
Euler ORIGINAL a times unit representative16 := mul(20, 16)
操作後
Euler ORIGINAL a times unit representative16 = 320
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S112
S114 · calculation
操作前
Euler unit representative16 raw image exact quotient := div(320, 23)
操作後
Euler unit representative16 raw image exact quotient = 320/23
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S113
S115 · calculation
操作前
Euler unit representative16 raw image floor quotient multiple := mul(13, 23)
操作後
Euler unit representative16 raw image floor quotient multiple = 299
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S114
S116 · calculation
操作前
Euler unit representative16 raw image normalized remainder := sub(320, 299)
操作後
Euler unit representative16 raw image normalized remainder = 21
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S115
S117 · implies
操作前
Euler unit representative16 raw image:ORIGINAL signed integer=320;modulus=23;exact ratio=320/23;floor quotient=13
操作後
value=q*n+remainder;normalized residue=21 in[0,23);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S116
S118 · calculation
操作前
Euler ORIGINAL a times unit representative17 := mul(20, 17)
操作後
Euler ORIGINAL a times unit representative17 = 340
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S117
S119 · calculation
操作前
Euler unit representative17 raw image exact quotient := div(340, 23)
操作後
Euler unit representative17 raw image exact quotient = 340/23
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S118
S120 · calculation
操作前
Euler unit representative17 raw image floor quotient multiple := mul(14, 23)
操作後
Euler unit representative17 raw image floor quotient multiple = 322
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S119
S121 · calculation
操作前
Euler unit representative17 raw image normalized remainder := sub(340, 322)
操作後
Euler unit representative17 raw image normalized remainder = 18
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S120
S122 · implies
操作前
Euler unit representative17 raw image:ORIGINAL signed integer=340;modulus=23;exact ratio=340/23;floor quotient=14
操作後
value=q*n+remainder;normalized residue=18 in[0,23);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S121
S123 · calculation
操作前
Euler ORIGINAL a times unit representative18 := mul(20, 18)
操作後
Euler ORIGINAL a times unit representative18 = 360
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S122
S124 · calculation
操作前
Euler unit representative18 raw image exact quotient := div(360, 23)
操作後
Euler unit representative18 raw image exact quotient = 360/23
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S123
S125 · calculation
操作前
Euler unit representative18 raw image floor quotient multiple := mul(15, 23)
操作後
Euler unit representative18 raw image floor quotient multiple = 345
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S124
S126 · calculation
操作前
Euler unit representative18 raw image normalized remainder := sub(360, 345)
操作後
Euler unit representative18 raw image normalized remainder = 15
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S125
S127 · implies
操作前
Euler unit representative18 raw image:ORIGINAL signed integer=360;modulus=23;exact ratio=360/23;floor quotient=15
操作後
value=q*n+remainder;normalized residue=15 in[0,23);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S126
S128 · calculation
操作前
Euler ORIGINAL a times unit representative19 := mul(20, 19)
操作後
Euler ORIGINAL a times unit representative19 = 380
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S127
S129 · calculation
操作前
Euler unit representative19 raw image exact quotient := div(380, 23)
操作後
Euler unit representative19 raw image exact quotient = 380/23
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S128
S130 · calculation
操作前
Euler unit representative19 raw image floor quotient multiple := mul(16, 23)
操作後
Euler unit representative19 raw image floor quotient multiple = 368
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S129
S131 · calculation
操作前
Euler unit representative19 raw image normalized remainder := sub(380, 368)
操作後
Euler unit representative19 raw image normalized remainder = 12
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S130
S132 · implies
操作前
Euler unit representative19 raw image:ORIGINAL signed integer=380;modulus=23;exact ratio=380/23;floor quotient=16
操作後
value=q*n+remainder;normalized residue=12 in[0,23);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S131
S133 · calculation
操作前
Euler ORIGINAL a times unit representative20 := mul(20, 20)
操作後
Euler ORIGINAL a times unit representative20 = 400
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S132
S134 · calculation
操作前
Euler unit representative20 raw image exact quotient := div(400, 23)
操作後
Euler unit representative20 raw image exact quotient = 400/23
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S133
S135 · calculation
操作前
Euler unit representative20 raw image floor quotient multiple := mul(17, 23)
操作後
Euler unit representative20 raw image floor quotient multiple = 391
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S134
S136 · calculation
操作前
Euler unit representative20 raw image normalized remainder := sub(400, 391)
操作後
Euler unit representative20 raw image normalized remainder = 9
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S135
S137 · implies
操作前
Euler unit representative20 raw image:ORIGINAL signed integer=400;modulus=23;exact ratio=400/23;floor quotient=17
操作後
value=q*n+remainder;normalized residue=9 in[0,23);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S136
S138 · calculation
操作前
Euler ORIGINAL a times unit representative21 := mul(20, 21)
操作後
Euler ORIGINAL a times unit representative21 = 420
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S137
S139 · calculation
操作前
Euler unit representative21 raw image exact quotient := div(420, 23)
操作後
Euler unit representative21 raw image exact quotient = 420/23
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S138
S140 · calculation
操作前
Euler unit representative21 raw image floor quotient multiple := mul(18, 23)
操作後
Euler unit representative21 raw image floor quotient multiple = 414
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S139
S141 · calculation
操作前
Euler unit representative21 raw image normalized remainder := sub(420, 414)
操作後
Euler unit representative21 raw image normalized remainder = 6
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S140
S142 · implies
操作前
Euler unit representative21 raw image:ORIGINAL signed integer=420;modulus=23;exact ratio=420/23;floor quotient=18
操作後
value=q*n+remainder;normalized residue=6 in[0,23);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S141
S143 · calculation
操作前
Euler ORIGINAL a times unit representative22 := mul(20, 22)
操作後
Euler ORIGINAL a times unit representative22 = 440
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S142
S144 · calculation
操作前
Euler unit representative22 raw image exact quotient := div(440, 23)
操作後
Euler unit representative22 raw image exact quotient = 440/23
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S143
S145 · calculation
操作前
Euler unit representative22 raw image floor quotient multiple := mul(19, 23)
操作後
Euler unit representative22 raw image floor quotient multiple = 437
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S144
S146 · calculation
操作前
Euler unit representative22 raw image normalized remainder := sub(440, 437)
操作後
Euler unit representative22 raw image normalized remainder = 3
條件:無
依原始角色與已核中間量精確代值,保留索引、正負號、分母與證明適用條件。
步驟識別與依賴
規則:exact_rational_arithmetic · 依賴:G001, S145
S147 · implies
操作前
Euler unit representative22 raw image:ORIGINAL signed integer=440;modulus=23;exact ratio=440/23;floor quotient=19
操作後
value=q*n+remainder;normalized residue=3 in[0,23);same congruence class,NOT absolute-value replacement
條件:無
對正模數取向下整數商,負base也保原同餘類;不能改成abs(a)。相同餘數是mod n同餘,不是原整數相等。
步驟識別與依賴
規則:euler_exact_signed_remainder_not_abs_or_integer_equality · 依賴:G001, S146
S148 · implies
操作前
COMPLETE original increasing U(n)=[1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22];actual images in ORIGINAL unit order=[20, 17, 14, 11, 8, 5, 2, 22, 19, 16, 13, 10, 7, 4, 1, 21, 18, 15, 12, 9, 6, 3]
操作後
SOURCE output sorts the mapped list numerically=[1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22];full-list equality=是;not a claim each point is fixed
條件:無
來源第二欄是排序後的完整像清單,非原unit順序的逐點像;相等證permutation,不代表乘a是identity。原始點像在本步另列,不靜默混同。
步驟識別與依賴
規則:euler_sorted_mapped_units_not_original_image_order_or_identity · 依賴:G001, S147