查找相關知識與題目 →

第 19862 題:Fermat小定理

本頁導覽
  1. 原題與已知條件
  2. 定義與適用範圍
  3. 逐步推導
  4. 逐步反向核對
  5. 結論
  6. 本題覆核與來源綁定

返回所在分頁 100

← 逐題詳解目錄 · 原題批次

R0038-19862 · q-20261014-advance-20261106-r05-fermat-little-theorem-0062

原題與已知條件

exact modular exponentiation與明示prime或composite hypotheses。操作=flt-hypothesis-audit;資料={"modulus":15,"a":-13}。請依 exact_ordered_tuple_declared_by_interface 欄序回答。

  • G001 — exact modular exponentiation與明示prime或composite hypotheses。操作=flt-hypothesis-audit;資料={"modulus":15,"a":-13}。請依 exact_ordered_tuple_declared_by_interface 欄序回答。

定義與適用範圍

沿用原題明示的論域、假設與來源 MKO 定義。本題已完成第二對話數理與中英語義覆核,並由原始參數逐題獨立重算模型、答案與每個算術步驟;原題仍為 candidate。

逐步推導

S001 · implies

操作前

source operation=flt-hypothesis-audit;original snapshot and mathematics retained

操作後

explicit ordered source output fields=[modulus, original_base, prime, coprime, coprime_form_applicable, power_modulus_minus_1, boundary]

條件:無

原題快照保留歷史介面標記;本頁直接列來源欄位順序,不需JavaScript或外部表。欄位標籤不自動成為數學證據,No依各題聲稱範圍解讀。

步驟識別與依賴

規則:source_ordered_interface_explicit_without_javascript · 依賴:G001

S002 · implies

操作前

ACTUAL integer modulus=15;complete trial range2..floor_sqrt=3

操作後

checked rows[divisor,quotient,remainder]=[[2, 7, 1], [3, 5, 0]];first exact factor=3;prime=否

條件:無

若找到2到sqrt範圍的真因數就是合數見證。若全部試除無因數,任意合數分解必至少一因數≤sqrt,故排除全部合成情形;2的試除範圍空仍合法。不是以一次Fermat測試證prime。

步驟識別與依賴

規則:flt_primality_complete_trial_or_actual_factor_not_Fermat_test · 依賴:G001, S001

S003 · implies

操作前

original signed base=-13;positive modulus=15;use nonnegative gcd inputs=[13, 15]

操作後

ALL Euclidean rows[left,right,q,r]=[[13, 15, 0, 13], [15, 13, 1, 2], [13, 2, 6, 1], [2, 1, 2, 0]];terminal nonnegative gcd=1;coprime=是

條件:無

餘數替換保共同因數,最後非零值給gcd;base0也保gcd(0,m)=m。不把模數prime與base可逆當同一旗標。

步驟識別與依賴

規則:flt_actual_gcd_coprime_separate_from_primality · 依賴:G001, S002

S004 · calculation

操作前

Fermat original signed base exact quotient := div(-13, 15)

操作後

Fermat original signed base exact quotient = -13/15

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S003

S005 · calculation

操作前

Fermat original signed base floor quotient multiple := mul(-1, 15)

操作後

Fermat original signed base floor quotient multiple = -15

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S004

S006 · calculation

操作前

Fermat original signed base normalized remainder := sub(-13, -15)

操作後

Fermat original signed base normalized remainder = 2

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S005

S007 · implies

操作前

Fermat original signed base:signed integer value=-13;positive modulus=15;exact quotient=-13/15;floor q=-1

操作後

value=q*modulus+remainder;normalized remainder=2 in[0,15)

條件:無

用正模數與向下整數商核實同餘類,負base也得到非負代表。餘數相等是mod此數的同餘,不是原整數都相等。

步驟識別與依賴

規則:flt_exact_signed_modulo_not_integer_equality · 依賴:G001, S006

S008 · implies

操作前

Fermat original modular exponent:original normalized base=2;original exponent=14;modulus=15

操作後

initialize accumulator1,current_base=base,remaining=exponent;invariant accumulator*current_base^remaining congruent to original power

條件:無

乘法單位元給0次方慣例;每步保持同一原始冪的同餘,不計龐大普通整數冪或混成實數等號。

步驟識別與依賴

規則:flt_modular_power_initial_invariant · 依賴:G001, S007

S009 · calculation

操作前

Fermat original modular exponent bit0 current base square := mul(2, 2)

操作後

Fermat original modular exponent bit0 current base square = 4

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S008

S010 · calculation

操作前

Fermat original modular exponent bit0 squared base reduction exact quotient := div(4, 15)

操作後

Fermat original modular exponent bit0 squared base reduction exact quotient = 4/15

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S009

S011 · calculation

操作前

Fermat original modular exponent bit0 squared base reduction floor quotient multiple := mul(0, 15)

操作後

Fermat original modular exponent bit0 squared base reduction floor quotient multiple = 0

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S010

S012 · calculation

操作前

Fermat original modular exponent bit0 squared base reduction normalized remainder := sub(4, 0)

操作後

Fermat original modular exponent bit0 squared base reduction normalized remainder = 4

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S011

S013 · implies

操作前

Fermat original modular exponent bit0 squared base reduction:signed integer value=4;positive modulus=15;exact quotient=4/15;floor q=0

操作後

value=q*modulus+remainder;normalized remainder=4 in[0,15)

條件:無

用正模數與向下整數商核實同餘類,負base也得到非負代表。餘數相等是mod此數的同餘,不是原整數都相等。

步驟識別與依賴

規則:flt_exact_signed_modulo_not_integer_equality · 依賴:G001, S012

S014 · implies

操作前

Fermat original modular exponent:step=0;previous[accumulator,base,exponent]=[1, 2, 14];low bit=0

操作後

next[accumulator,base,exponent]=[1, 4, 7];split exponent=2*q+bit preserves original-power invariant

條件:無

偶次方換成平方底數,奇次方多取一個底數進accumulator;每次合法取模保同餘,剩餘非負exponent減半故終止。

步驟識別與依賴

規則:flt_each_binary_power_step_exact_invariant · 依賴:G001, S013

S015 · calculation

操作前

Fermat original modular exponent bit1 accumulator product := mul(1, 4)

操作後

Fermat original modular exponent bit1 accumulator product = 4

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S014

S016 · calculation

操作前

Fermat original modular exponent bit1 accumulator reduction exact quotient := div(4, 15)

操作後

Fermat original modular exponent bit1 accumulator reduction exact quotient = 4/15

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S015

S017 · calculation

操作前

Fermat original modular exponent bit1 accumulator reduction floor quotient multiple := mul(0, 15)

操作後

Fermat original modular exponent bit1 accumulator reduction floor quotient multiple = 0

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S016

S018 · calculation

操作前

Fermat original modular exponent bit1 accumulator reduction normalized remainder := sub(4, 0)

操作後

Fermat original modular exponent bit1 accumulator reduction normalized remainder = 4

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S017

S019 · implies

操作前

Fermat original modular exponent bit1 accumulator reduction:signed integer value=4;positive modulus=15;exact quotient=4/15;floor q=0

操作後

value=q*modulus+remainder;normalized remainder=4 in[0,15)

條件:無

用正模數與向下整數商核實同餘類,負base也得到非負代表。餘數相等是mod此數的同餘,不是原整數都相等。

步驟識別與依賴

規則:flt_exact_signed_modulo_not_integer_equality · 依賴:G001, S018

S020 · calculation

操作前

Fermat original modular exponent bit1 current base square := mul(4, 4)

操作後

Fermat original modular exponent bit1 current base square = 16

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S019

S021 · calculation

操作前

Fermat original modular exponent bit1 squared base reduction exact quotient := div(16, 15)

操作後

Fermat original modular exponent bit1 squared base reduction exact quotient = 16/15

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S020

S022 · calculation

操作前

Fermat original modular exponent bit1 squared base reduction floor quotient multiple := mul(1, 15)

操作後

Fermat original modular exponent bit1 squared base reduction floor quotient multiple = 15

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S021

S023 · calculation

操作前

Fermat original modular exponent bit1 squared base reduction normalized remainder := sub(16, 15)

操作後

Fermat original modular exponent bit1 squared base reduction normalized remainder = 1

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S022

S024 · implies

操作前

Fermat original modular exponent bit1 squared base reduction:signed integer value=16;positive modulus=15;exact quotient=16/15;floor q=1

操作後

value=q*modulus+remainder;normalized remainder=1 in[0,15)

條件:無

用正模數與向下整數商核實同餘類,負base也得到非負代表。餘數相等是mod此數的同餘,不是原整數都相等。

步驟識別與依賴

規則:flt_exact_signed_modulo_not_integer_equality · 依賴:G001, S023

S025 · implies

操作前

Fermat original modular exponent:step=1;previous[accumulator,base,exponent]=[1, 4, 7];low bit=1

操作後

next[accumulator,base,exponent]=[4, 1, 3];split exponent=2*q+bit preserves original-power invariant

條件:無

偶次方換成平方底數,奇次方多取一個底數進accumulator;每次合法取模保同餘,剩餘非負exponent減半故終止。

步驟識別與依賴

規則:flt_each_binary_power_step_exact_invariant · 依賴:G001, S024

S026 · calculation

操作前

Fermat original modular exponent bit2 accumulator product := mul(4, 1)

操作後

Fermat original modular exponent bit2 accumulator product = 4

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S025

S027 · calculation

操作前

Fermat original modular exponent bit2 accumulator reduction exact quotient := div(4, 15)

操作後

Fermat original modular exponent bit2 accumulator reduction exact quotient = 4/15

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S026

S028 · calculation

操作前

Fermat original modular exponent bit2 accumulator reduction floor quotient multiple := mul(0, 15)

操作後

Fermat original modular exponent bit2 accumulator reduction floor quotient multiple = 0

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S027

S029 · calculation

操作前

Fermat original modular exponent bit2 accumulator reduction normalized remainder := sub(4, 0)

操作後

Fermat original modular exponent bit2 accumulator reduction normalized remainder = 4

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S028

S030 · implies

操作前

Fermat original modular exponent bit2 accumulator reduction:signed integer value=4;positive modulus=15;exact quotient=4/15;floor q=0

操作後

value=q*modulus+remainder;normalized remainder=4 in[0,15)

條件:無

用正模數與向下整數商核實同餘類,負base也得到非負代表。餘數相等是mod此數的同餘,不是原整數都相等。

步驟識別與依賴

規則:flt_exact_signed_modulo_not_integer_equality · 依賴:G001, S029

S031 · calculation

操作前

Fermat original modular exponent bit2 current base square := mul(1, 1)

操作後

Fermat original modular exponent bit2 current base square = 1

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S030

S032 · calculation

操作前

Fermat original modular exponent bit2 squared base reduction exact quotient := div(1, 15)

操作後

Fermat original modular exponent bit2 squared base reduction exact quotient = 1/15

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S031

S033 · calculation

操作前

Fermat original modular exponent bit2 squared base reduction floor quotient multiple := mul(0, 15)

操作後

Fermat original modular exponent bit2 squared base reduction floor quotient multiple = 0

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S032

S034 · calculation

操作前

Fermat original modular exponent bit2 squared base reduction normalized remainder := sub(1, 0)

操作後

Fermat original modular exponent bit2 squared base reduction normalized remainder = 1

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S033

S035 · implies

操作前

Fermat original modular exponent bit2 squared base reduction:signed integer value=1;positive modulus=15;exact quotient=1/15;floor q=0

操作後

value=q*modulus+remainder;normalized remainder=1 in[0,15)

條件:無

用正模數與向下整數商核實同餘類,負base也得到非負代表。餘數相等是mod此數的同餘,不是原整數都相等。

步驟識別與依賴

規則:flt_exact_signed_modulo_not_integer_equality · 依賴:G001, S034

S036 · implies

操作前

Fermat original modular exponent:step=2;previous[accumulator,base,exponent]=[4, 1, 3];low bit=1

操作後

next[accumulator,base,exponent]=[4, 1, 1];split exponent=2*q+bit preserves original-power invariant

條件:無

偶次方換成平方底數,奇次方多取一個底數進accumulator;每次合法取模保同餘,剩餘非負exponent減半故終止。

步驟識別與依賴

規則:flt_each_binary_power_step_exact_invariant · 依賴:G001, S035

S037 · calculation

操作前

Fermat original modular exponent bit3 accumulator product := mul(4, 1)

操作後

Fermat original modular exponent bit3 accumulator product = 4

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S036

S038 · calculation

操作前

Fermat original modular exponent bit3 accumulator reduction exact quotient := div(4, 15)

操作後

Fermat original modular exponent bit3 accumulator reduction exact quotient = 4/15

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S037

S039 · calculation

操作前

Fermat original modular exponent bit3 accumulator reduction floor quotient multiple := mul(0, 15)

操作後

Fermat original modular exponent bit3 accumulator reduction floor quotient multiple = 0

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S038

S040 · calculation

操作前

Fermat original modular exponent bit3 accumulator reduction normalized remainder := sub(4, 0)

操作後

Fermat original modular exponent bit3 accumulator reduction normalized remainder = 4

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S039

S041 · implies

操作前

Fermat original modular exponent bit3 accumulator reduction:signed integer value=4;positive modulus=15;exact quotient=4/15;floor q=0

操作後

value=q*modulus+remainder;normalized remainder=4 in[0,15)

條件:無

用正模數與向下整數商核實同餘類,負base也得到非負代表。餘數相等是mod此數的同餘,不是原整數都相等。

步驟識別與依賴

規則:flt_exact_signed_modulo_not_integer_equality · 依賴:G001, S040

S042 · calculation

操作前

Fermat original modular exponent bit3 current base square := mul(1, 1)

操作後

Fermat original modular exponent bit3 current base square = 1

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S041

S043 · calculation

操作前

Fermat original modular exponent bit3 squared base reduction exact quotient := div(1, 15)

操作後

Fermat original modular exponent bit3 squared base reduction exact quotient = 1/15

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S042

S044 · calculation

操作前

Fermat original modular exponent bit3 squared base reduction floor quotient multiple := mul(0, 15)

操作後

Fermat original modular exponent bit3 squared base reduction floor quotient multiple = 0

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S043

S045 · calculation

操作前

Fermat original modular exponent bit3 squared base reduction normalized remainder := sub(1, 0)

操作後

Fermat original modular exponent bit3 squared base reduction normalized remainder = 1

條件:無

依原始角色與已核中間量精確代值,保留正負號、分母、索引及所在載體。

步驟識別與依賴

規則:exact_rational_arithmetic · 依賴:G001, S044

S046 · implies

操作前

Fermat original modular exponent bit3 squared base reduction:signed integer value=1;positive modulus=15;exact quotient=1/15;floor q=0

操作後

value=q*modulus+remainder;normalized remainder=1 in[0,15)

條件:無

用正模數與向下整數商核實同餘類,負base也得到非負代表。餘數相等是mod此數的同餘,不是原整數都相等。

步驟識別與依賴

規則:flt_exact_signed_modulo_not_integer_equality · 依賴:G001, S045

S047 · implies

操作前

Fermat original modular exponent:step=3;previous[accumulator,base,exponent]=[4, 1, 1];low bit=1

操作後

next[accumulator,base,exponent]=[4, 1, 0];split exponent=2*q+bit preserves original-power invariant

條件:無

偶次方換成平方底數,奇次方多取一個底數進accumulator;每次合法取模保同餘,剩餘非負exponent減半故終止。

步驟識別與依賴

規則:flt_each_binary_power_step_exact_invariant · 依賴:G001, S046

S048 · implies

操作前

Fermat original modular exponent:remaining exponent0;final normalized accumulator=4

操作後

EXACT original base^14 modulo15=4

條件:無

不變式在remaining0時只剩accumulator,得到原始冪的確切餘數;這個算術結果本身不證模數prime。

步驟識別與依賴

規則:flt_modular_power_terminal_not_primality_converse · 依賴:G001, S047

S049 · implies

操作前

ACTUAL modulus=15;ORIGINAL signed base=-13;prime=否;coprime=是;actual power residue=4

操作後

prime-coprime applicability=否;failed hypotheses do NOT force actual residue!=1;one successful residue does NOT prove prime

條件:無

joint flag是兩個前提的合取,不是把算出的冪與1比較。合數也可能對某個base得到1;不適用不等於算術一定失敗,算術通過也不等於prime。

步驟識別與依賴

規則:flt_applicability_not_actual_power_failure_or_converse · 依賴:G001, S048

逐步反向核對

  • S049 · premise_and_result_audit — 回到原始資料與本步條件核對,不把單向推論誤稱等價。
  • S048 · premise_and_result_audit — 回到原始資料與本步條件核對,不把單向推論誤稱等價。
  • S047 · premise_and_result_audit — 回到原始資料與本步條件核對,不把單向推論誤稱等價。
  • S046 · premise_and_result_audit — 回到原始資料與本步條件核對,不把單向推論誤稱等價。
  • S045 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit3 squared base reduction normalized remainder,不以小數近似替代。
  • S044 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit3 squared base reduction floor quotient multiple,不以小數近似替代。
  • S043 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit3 squared base reduction exact quotient,不以小數近似替代。
  • S042 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit3 current base square,不以小數近似替代。
  • S041 · premise_and_result_audit — 回到原始資料與本步條件核對,不把單向推論誤稱等價。
  • S040 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit3 accumulator reduction normalized remainder,不以小數近似替代。
  • S039 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit3 accumulator reduction floor quotient multiple,不以小數近似替代。
  • S038 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit3 accumulator reduction exact quotient,不以小數近似替代。
  • S037 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit3 accumulator product,不以小數近似替代。
  • S036 · premise_and_result_audit — 回到原始資料與本步條件核對,不把單向推論誤稱等價。
  • S035 · premise_and_result_audit — 回到原始資料與本步條件核對,不把單向推論誤稱等價。
  • S034 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit2 squared base reduction normalized remainder,不以小數近似替代。
  • S033 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit2 squared base reduction floor quotient multiple,不以小數近似替代。
  • S032 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit2 squared base reduction exact quotient,不以小數近似替代。
  • S031 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit2 current base square,不以小數近似替代。
  • S030 · premise_and_result_audit — 回到原始資料與本步條件核對,不把單向推論誤稱等價。
  • S029 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit2 accumulator reduction normalized remainder,不以小數近似替代。
  • S028 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit2 accumulator reduction floor quotient multiple,不以小數近似替代。
  • S027 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit2 accumulator reduction exact quotient,不以小數近似替代。
  • S026 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit2 accumulator product,不以小數近似替代。
  • S025 · premise_and_result_audit — 回到原始資料與本步條件核對,不把單向推論誤稱等價。
  • S024 · premise_and_result_audit — 回到原始資料與本步條件核對,不把單向推論誤稱等價。
  • S023 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit1 squared base reduction normalized remainder,不以小數近似替代。
  • S022 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit1 squared base reduction floor quotient multiple,不以小數近似替代。
  • S021 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit1 squared base reduction exact quotient,不以小數近似替代。
  • S020 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit1 current base square,不以小數近似替代。
  • S019 · premise_and_result_audit — 回到原始資料與本步條件核對,不把單向推論誤稱等價。
  • S018 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit1 accumulator reduction normalized remainder,不以小數近似替代。
  • S017 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit1 accumulator reduction floor quotient multiple,不以小數近似替代。
  • S016 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit1 accumulator reduction exact quotient,不以小數近似替代。
  • S015 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit1 accumulator product,不以小數近似替代。
  • S014 · premise_and_result_audit — 回到原始資料與本步條件核對,不把單向推論誤稱等價。
  • S013 · premise_and_result_audit — 回到原始資料與本步條件核對,不把單向推論誤稱等價。
  • S012 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit0 squared base reduction normalized remainder,不以小數近似替代。
  • S011 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit0 squared base reduction floor quotient multiple,不以小數近似替代。
  • S010 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit0 squared base reduction exact quotient,不以小數近似替代。
  • S009 · premise_and_result_audit — 以精確有理數重算 Fermat original modular exponent bit0 current base square,不以小數近似替代。
  • S008 · premise_and_result_audit — 回到原始資料與本步條件核對,不把單向推論誤稱等價。
  • S007 · premise_and_result_audit — 回到原始資料與本步條件核對,不把單向推論誤稱等價。
  • S006 · premise_and_result_audit — 以精確有理數重算 Fermat original signed base normalized remainder,不以小數近似替代。
  • S005 · premise_and_result_audit — 以精確有理數重算 Fermat original signed base floor quotient multiple,不以小數近似替代。
  • S004 · premise_and_result_audit — 以精確有理數重算 Fermat original signed base exact quotient,不以小數近似替代。
  • S003 · premise_and_result_audit — 回到原始資料與本步條件核對,不把單向推論誤稱等價。
  • S002 · premise_and_result_audit — 回到原始資料與本步條件核對,不把單向推論誤稱等價。
  • S001 · premise_and_result_audit — 回到原始資料與本步條件核對,不把單向推論誤稱等價。

結論

(15, -13, 否, 是, 否, 4, coprime_form_not_applicable_without_both_hypotheses)

依上列完整代值及條件核對得到原題答案;原題編號、格式與狀態保持不變。

本題覆核與來源綁定

覆核日期:2026-10-26

原題、答案、步驟表達式、數值 AST 與既有歷史保持原樣;原來的候選狀態屬於來源歷史,不覆寫為形式化證明。

來源雜湊與覆核憑證
  • input commit: 0f7be61e2c22317a4075561dc822c87d881a50db
  • original question SHA-256: 2ba4945d91fb18eb0d9f8d34ddb2f50096fe1cf1376ff5ca267ccc8658f94053
  • candidate record SHA-256: 8405ba2287aa6d89caf5f02d35606ceb0befd210c772c8a03d73c2379091fa3d
  • semantic review receipt SHA-256: d165cad30849a3aba67390a59c572c0d965269d4b405e43df36da19e28d85612
  • question-first witness SHA-256: c222ca47a07939c019865a1e4d9ce633205cdee68db92bf96a96f5683a62ebc7
  • Lean: NOT_RUN · human review: NOT_PERFORMED
同源完整 JSON